{"title":"CAT 5 ETHERNET","description":"","products":[{"product_id":"outdoor-10-100-base-t-cat5-lightning-surge-protector-screw-terminals","title":"Outdoor 10\/100 Base-T CAT5 Lightning Surge Protector - Screw Terminals","description":"The AL-CAT5SW is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The unit is compatible with both normal and inverted polarity voltage PoE equipment. For maximum protection two AL-CAT5SW units should be used, one at each end of the CAT5 cable.\u003cbr\u003e\u003cbr\u003e For non-PoE applications this protector can be used for two CAT5 cables, 2-pairs in each cable. Applications include twin IP camera installations and network devices with dual CAT5 ports.\u003cbr\u003e\u003cbr\u003e Optional versions of this unit can be used to protect Telephone and DSL lines as well as balanced data lines like RS-422\/485. The unit will protect up to four balanced twisted pairs. Please consult the factory for custom versions of the unit. Minimum quantity requirements apply.\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommet may be adjusted to cable size and is removable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImpact and weather resistant, locking hinged cover\u003c\/li\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet and Cisco® Reverse Polarity PoE compatible\u003c\/li\u003e\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\n\u003cli\u003eSupports use of shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003eScrew Terminal Strips\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873477059,"sku":"AL-CAT5SW","price":84.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_AL-CAT5SW.jpeg?v=1787932656"},{"product_id":"outdoor-high-power-10-100-base-t-cat5-lightning-surge-protector-rj45-jacks","title":"Outdoor High Power 10\/100 Base-T CAT5 Lightning Surge Protector- RJ45 Jacks","description":"The AL-CAT5HPJW is the outdoor version of the HGLN-CAT5-HP protector. This 3-stage lightning protector provides superior lightning and surge protection for indoor and outdoor 10\/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. \u003cbr\u003e\u003cbr\u003e In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eReverse PoE Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e This protector is also available in a indoor version, \u003ca href=\"\/item.aspx?id=10034%22\"\u003eHGLN-CAT5-HP\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below\u0026gt;\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImpact and weather resistant enclosure with locking hinge\u003c\/li\u003e\n\u003cli\u003eThree-stage protection \u0026amp; failsafe architecture\u003c\/li\u003e\n\u003cli\u003eShielded RJ-45 Jacks\u003c\/li\u003e\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\n\u003cli\u003eReverse Polarity PoE compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873874051,"sku":"AL-CAT5HPJW","price":125.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5HPJW_4bd99a8b-563a-4162-9732-84f0550dd372.jpeg?v=1787933022"},{"product_id":"weatherproof-hi-power-multi-port-10-100-base-t-cat5-lightning-protector-screw-terminals","title":"Weatherproof Hi-Power Multi-Port 10\/100 Base-T CAT5 Lightning Protector - Screw Terminals","description":"The Hyperlink CAT5 three-stage multi-port Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10\/100 Base-T networks. Up to four separate CAT5 lines can be protected by a single unit. In addition, the unit is compatible with Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. \u003cbr\u003e\u003cbr\u003e In the data path, the first stage of protection is a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a dual low pass filter and the final stage is a triple array of bi-directional clamping diodes. The unit supports normal and reverse polarity PoE.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Architecture \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The Advantage of the AL-CAT5HPW-4 three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.\u003cbr\u003e\u003cbr\u003e The AL-CATHPW-4 CAT5 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers, with or without Power-over-Ethernet (PoE) functionality. A ground clamp provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable. \u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eApplication Note:\u003c\/b\u003e This unit will not work with Cisco® Power Over Ethernet Injectors. Use HyperLink's Cisco® compatible BT-CAT5-P1R DC Injector.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below\u0026gt;\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtect up to four separate CAT5 lines\u003c\/li\u003e\n\u003cli\u003eThree-stage protection\u003c\/li\u003e\n\u003cli\u003eFailsafe architecture \u0026amp; Weatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable terminal strips, with ground clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003eGasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873874115,"sku":"AL-CAT5HPW-4","price":565.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_AL-CAT5HPW-4_19e41c57-6495-4a02-a3b5-9687316888b1.jpeg?v=1787931844"},{"product_id":"weatherproof-hi-power-10-100-base-t-cat5-lightning-protector-screw-terminals","title":"Weatherproof Hi-Power 10\/100 Base-T CAT5 Lightning Protector - Screw Terminals","description":"The AL-CAT5HPWT is a high performance 3-stage weatherproof protector that provides superior protection 10\/100 Base-T networks. This model is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and provides individual protection to both the Ethernet data pairs as well as the PoE DC power feeds. The unit supports both modes A and B of the 802.3af standard for of supplying DC power.\u003cbr\u003e\u003cbr\u003e This arrester is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage.\u003cbr\u003e\u003cbr\u003e Ideal for outdoor use, the weatherproof ABS enclosure features a gasketed cover and concealed mounting holes. Screw terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection for all 8 wires\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with removable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873875075,"sku":"AL-CAT5HPWT","price":186.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5HPWT_0e8b40a6-d43a-445b-931d-ad46e651bb0e.jpeg?v=1787930323"},{"product_id":"outdoor-med-power-10-100-base-t-cat5-lightning-surge-protector-rj45-jacks","title":"Outdoor Med Power 10\/100 Base-T CAT5 Lightning Surge Protector - RJ45 Jacks","description":"The AL-CAT5JW is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The design utilizes Thyristor diode technology which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment. \u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommet may be adjusted to cable size and is removable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Additional models available:\u003cbr\u003e Outdoor model with Shielded RJ45 Jacks - AL-CAT5SJW\u003cbr\u003e Indoor Model with Shielded RJ45 Jacks - \u003ca href=\"\/item.aspx?id=23168%22\"\u003eHGLN-CAT5J\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImpact and weather resistant, locking hinged cover\u003c\/li\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet and Cisco® Reverse Polarity PoE compatible\u003c\/li\u003e\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\n\u003cli\u003eSupports use of shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003e(2) RJ45 Jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873875459,"sku":"AL-CAT5JW","price":18.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_AL-CAT5JW_cd1304de-3ab2-4edd-b3c6-96a9fbbd8cf3.jpeg?v=1787932480"},{"product_id":"outdoor-10-100-base-t-cat5-lightning-surge-protector-punch-down-terminals","title":"Outdoor 10\/100 Base-T CAT5 Lightning Surge Protector - Punch Down Terminals","description":"The AL-CAT5PW is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The unit is compatible with both normal and inverted polarity voltage PoE equipment. For maximum protection two AL-CAT5PW units should be used, one at each end of the CAT5 cable.\u003cbr\u003e\u003cbr\u003e For non-PoE applications this protector can be used for two CAT5 cables, 2-pairs in each cable. Applications include twin IP camera installations and network devices with dual CAT5 ports.\u003cbr\u003e\u003cbr\u003e Optional versions of this unit can be used to protect Telephone and DSL lines as well as balanced data lines like RS-422\/485. The unit will protect up to four balanced twisted pairs. Please consult the factory for custom versions of the unit. Minimum quantity requirements apply.\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommet may be adjusted to cable size and is removable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts. \u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eImpact and weather resistant, locking hinged cover\u003c\/li\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet and Cisco® Reverse Polarity PoE compatible\u003c\/li\u003e\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\n\u003cli\u003eSupports use of shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003ePunch Down Terminal Strips\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873875651,"sku":"AL-CAT5PW","price":83.52,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_AL-CAT5PW_5f7a3e8b-1cc0-47c1-a6e5-35f9df48fec2.jpeg?v=1787931430"},{"product_id":"weatherproof-hi-power-10-100-base-t-cat5-lightning-protector-shielded-rj45-jacks","title":"Weatherproof Hi-Power 10\/100 Base-T CAT5 Lightning Protector - Shielded RJ45 Jacks","description":"The AL-CAT5SHPW CAT5 three-stage Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10\/100 Base-T networks. In addition, the unit is compatible with Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Architecture\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The Advantage of this three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eRugged Design and Ease of Use\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. For convenience terminal strips and shielded RJ45 Jacks are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. The shielded RJ45 Jacks helps reduce the effects of EMI interference. Their right angle design help ease the use of pre-terminated CAT5 Ethernet cable.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e3- stage protection with failsafe architecture\u003c\/li\u003e\n\u003cli\u003ePower-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eEasy access shielded RJ45 jacks and removable terminal strips\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with gasketed cover\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873875907,"sku":"AL-CAT5SHPW","price":159.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5SHPW_7da1107b-5d12-48cb-9585-4e555b60b097.jpeg?v=1787931821"},{"product_id":"outdoor-10-100-base-t-cat5-lightning-surge-protector-shielded-rj45-jacks","title":"Outdoor 10\/100 Base-T CAT5 Lightning Surge Protector - Shielded RJ45 Jacks","description":"The AL-CAT5SJW is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e This protector is also available for 15 Volt and 24 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=33506%22\"\u003eAL-CAT5SJW24\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The design utilizes Thyristor diode technology which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment.\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommet may be adjusted to cable size and are removable.\u003cbr\u003e\u003cbr\u003e To help reduce the effects of EMI interference, the AL-CAT5SJW features shielded RJ45 jacks.\u003cbr\u003e\u003cbr\u003e This unit supports normal and reverse polarity PoE used in some Cisco Access Points. It is compatible with devices with or without Power-over-Ethernet (PoE) functionality.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Additional models available:\u003cbr\u003e Indoor Model with Shielded RJ45 Jacks - \u003ca href=\"\/item.aspx?id=23168\"\u003eHGLN-CAT5J\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet and Reverse Polarity PoE compatible\u003c\/li\u003e\n\u003cli\u003eImpact and weather resistant enclosure with lockable hinged cover\u003c\/li\u003e\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\n\u003cli\u003e(2) Shielded RJ45 jacks reduce EMI interference\u003c\/li\u003e\n\u003cli\u003eSupports use of shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873876739,"sku":"AL-CAT5SJW","price":85.32,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5SJW_8983ef41-17dd-4174-9c10-4e67ab78ce02.jpeg?v=1787932431"},{"product_id":"outdoor-10-100-base-t-24v-poe-cat5-lightning-surge-protector-shielded-rj45-jacks","title":"Outdoor 10\/100 Base-T 24V PoE CAT5 Lightning Surge Protector - Shielded RJ45 Jacks","description":"The AL-CAT5SJW24 is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both PoE modes A and B for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 36 volts on the four cable pairs. The design utilizes Thyristor diode technology which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and reverse polarity voltage PoE equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e15 Volt and 24 Volt PoE Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Designed to be compatible with 15V and 24V PoE devices, the AL-CAT5SJW24 is ideal for use with select devices from Motorola, Ubiquiti, Engenius and Planet as well as other PoE equipment requiring 15V or 24V.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eNote: This protector is not intended for use with standard 48V PoE devices.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This protector is also available for standard 48 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=24908%22\"\u003eAL-CAT5SJW\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommet may be adjusted to cable size and are removable. A ground lug and terminal is provided in the lightning protector housing providing superior grounding. The unit also supports the use of shielded CAT5 cable. To help reduce the effects of EMI interference, the AL-CAT5SJW24 features shielded RJ45 jacks. \u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with 15V and 24V Power-Over-Ethernet (PoE) devices\u003c\/li\u003e\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\n\u003cli\u003eImpact and weather resistant enclosure with locking hinged cover\u003c\/li\u003e\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\n\u003cli\u003eShielded RJ45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873877379,"sku":"AL-CAT5SJW24","price":91.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5SJW.jpeg?v=1787933586"},{"product_id":"outdoor-10-100-base-t-cat5-lightning-surge-protector","title":"Outdoor 10\/100 Base-T CAT5 Lightning Surge Protector","description":"The AL-CAT5VW-1 is a Compact Weather Resistant Lightning Protector which provides lightning and surge protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed.\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and break-away holes are provided on the rear of the enclosure for mounting. The cable grommets may be adjusted to cable size and are removable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Note: This protector replaces the AL-CAT5VW model.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\n\u003cli\u003ePower-Over-Ethernet Compatible\u003c\/li\u003e\n\u003cli\u003eReverse Polarity PoE compatible\u003c\/li\u003e\n\u003cli\u003eImpact and weather resistant, locking hinged cover\u003c\/li\u003e\n\u003cli\u003e(2) RJ45 Jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873877891,"sku":"AL-CAT5VW-1","price":93.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5VW-1_723c8ee3-281f-40cd-b6da-ed7e30ab1444.jpeg?v=1787931418"},{"product_id":"weatherproof-10-100-base-t-cat5-lightning-protector-rj45-screw-terminals","title":"Weatherproof 10\/100 Base-T CAT5 Lightning Protector - RJ45\/Screw Terminals","description":"The AL-CAT5W CAT5 Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10\/100 Base-T networks. In addition, the unit is compatible with Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. This unit supports normal and reverse polarity PoE.\u003cbr\u003e\u003cbr\u003e This CAT5 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers, with or without Power-over-Ethernet (PoE) functionality. The AL-CAT5W also make an ideal alternative to the Transtector® ALPU-TSU protector. It features equal performance but at a substantial savings.\u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Both terminal strips and modular RJ45 female jacks are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eApplication Note:\u003c\/b\u003e This unit will not work with Cisco® Power Over Ethernet Injectors. Use HyperLink's Cisco® compatible BT-CAT5-P1R DC Injector.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see Data Sheet link below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eGasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eRemovable terminal strips and modular RJ45 jacks\u003c\/li\u003e\n\u003cli\u003eGround clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003ePower-Over-Ethernet (PoE) compatible that supports normal and reverse polarity PoE\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873878275,"sku":"AL-CAT5W","price":138.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5W_c19c16d2-dd37-431e-8b5d-5d368ba5bd18.jpeg?v=1787932250"},{"product_id":"weatherproof-multi-port-10-100-base-t-cat5-lightning-protector-rj45-jacks","title":"Weatherproof Multi-Port 10\/100 Base-T CAT5 Lightning Protector - RJ45 Jacks","description":"The AL-CAT5W-4 is a multi-port indoor and outdoor lightning surge arrestor, which provides protection for CAT5 data applications. A single unit protects up to four separate CAT5 lines. This model is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power.\u003cbr\u003e\u003cbr\u003e This protector is also available for 15 Volt and 24 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=33509%22\"\u003eAL-CAT5W-4-24\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The design utilizes Thyristor diode technology, which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e The AL-CAT5W-4 features a weatherproof ABS enclosure with O-ring gasket and concealed mounting holes. A ground clamp mounted outside the enclosure provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable. \u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see the Data Sheet below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtect up to four separate CAT5 lines\u003c\/li\u003e\n\u003cli\u003eProtection for all 8 wires per line\u003c\/li\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with O-ring gasket\u003c\/li\u003e\n\u003cli\u003eShielded RJ-45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873879107,"sku":"AL-CAT5W-4","price":260.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5W-4_e6b9c79d-dbd4-42d3-8725-36f9f00c5316.jpeg?v=1787930960"},{"product_id":"weatherproof-multi-port-10-100-base-t-24v-poe-cat5-lightning-protector-rj45-jacks","title":"Weatherproof Multi-Port 10\/100 Base-T 24V PoE CAT5 Lightning Protector - RJ45 Jacks","description":"The AL-CAT5W-4-24 is a multi-port indoor and outdoor lightning surge arrestor, which provides protection for CAT5 data applications. A single unit protects up to four separate CAT5 lines. This model is fully compatible with industry-standard 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both PoE modes A and B for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 36 volts on the four cable pairs. The design utilizes Thyristor diode technology, which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e15 Volt and 24 Volt PoE Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Designed to be compatible with 15V and 24V PoE devices, the AL-CAT5W-4-24 is ideal for use with select devices from Motorola, Ubiquiti, Engenius and Planet as well as other PoE equipment requiring 15V or 24V. Canopy clusters can also take advantage of the multi-port design.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eNote: This protector is not intended for use with standard 48V PoE devices.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This protector is also available for standard 48 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=30955%22\"\u003eAL-CAT5W-4\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e The AL-CAT5W-4-24 features a weatherproof ABS enclosure with O-ring gasket and concealed mounting holes. A ground clamp mounted outside the enclosure provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable. \u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see the Data Sheet below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtect up to four separate CAT5 lines with protection for all 8 wires per line\u003c\/li\u003e\n\u003cli\u003eCompatible with 15V and 24V Power-Over-Ethernet (PoE) devices\u003c\/li\u003e\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with O-ring gasket\u003c\/li\u003e\n\u003cli\u003eShielded RJ-45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873879491,"sku":"AL-CAT5W-4-24","price":287.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5W-4.jpeg?v=1787933431"},{"product_id":"compact-weatherproof-10-100-base-t-cat5-lightning-protector-shielded-rj45","title":"Compact Weatherproof 10\/100 Base-T CAT5 Lightning Protector - Shielded RJ45","description":"The ALS-CAT5W is a indoor and outdoor lightning surge arrestor which provides protection for CAT5 data applications. This model is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af\/at standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass an un-booted RJ45 connector through so pre-terminated cables can be used.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on data sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for all 8 wires\u003c\/li\u003e\n\u003cli\u003e802.3af\/at Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eSupports modes A and B PoE\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with gasketed cover\u003c\/li\u003e\n\u003cli\u003eShielded Right Angle RJ45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873928835,"sku":"ALS-CAT5W","price":97.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/ALS-CAT.jpg?v=1787931109"},{"product_id":"industrial-grade-hi-power-10-100-base-t-cat5-lightning-protector-shielded-rj45-jacks","title":"Industrial Grade Hi-Power 10\/100 Base-T CAT5 Lightning Protector - Shielded RJ45 Jacks","description":"This 3-stage Lightning Protector provides superior lightning and surge protection for indoor and outdoor 10\/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. \u003cbr\u003e\u003cbr\u003e The Advantage of the ALW-CAT5HPJ three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.\u003cbr\u003e\u003cbr\u003e This protector features an industrial grade die cast aluminum enclosure with gasketed cover and concealed mounting holes. It includes an aluminum mounting kit and hardware. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass a un-boot RJ45 connector through so pre-terminated cables can be used. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThree-Stage Protection, Failsafe Architecture\u003c\/li\u003e\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\n\u003cli\u003eReverse polarity PoE compatible\u003c\/li\u003e\n\u003cli\u003eShielded RJ45\u003c\/li\u003e\n\u003cli\u003eIndustrial grade weatherproof die cast aluminum enclosure with mounting brackets\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873937667,"sku":"ALW-CAT5HPJ","price":147.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/ALW-CAT5HPJ.jpg?v=1787933524"},{"product_id":"indoor-2-port-med-power-10-100-base-t-cat5-lightning-surge-protector","title":"Indoor 2-Port Med Power 10\/100 Base-T CAT5 Lightning Surge Protector","description":"\u003cp\u003eThe CMSP-CAT5-2 provides protection for two CAT5 data lines. The unit is fully compatible with industry-standard 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE power feed. The unit supports both 802.3af modes A and B supplying power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8. Each module supports both AC and +\/- DC power. The CMSP-CAT5-2 features shielded RJ45 jacks for use with of shielded CAT5 cable. This arrestor is compatible with 10 and 100 Base-T Network appliance with or without PoE capability. This includes Wireless Access Points, Wired Switches, Network Appliances, Outdoor Wireless Routers and CCTV IP Cameras. A ground lug and terminal is provided to allow connection to the rack system ground. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable. This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, IP Phones, DC Injectors and other equipment supporting reverse polarity PoE pinouts. This protector is also available in a 4-port version, L-com part number CMSP-CAT5-4.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873942339,"sku":"CMSP-CAT5-2","price":138.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-2_134e3a40-2aca-444f-9893-c98143559384.jpeg?v=1787932513"},{"product_id":"indoor-4-port-med-power-10-100-base-t-cat5-lightning-surge-protector","title":"Indoor 4-Port Med Power 10\/100 Base-T CAT5 Lightning Surge Protector","description":"The CMSP-CAT5-4 provides protection for four CAT5 data lines. The unit is fully compatible with industry-standard 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE power feed. The unit supports both 802.3af modes A and B supplying power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8. Each module supports both AC and +\/- DC power. The CMSP-CAT5-4 features shielded RJ45 jacks for use with of shielded CAT5 cable.\u003cbr\u003e\u003cbr\u003e This arrestor is compatible with 10 and 100 Base-T Network appliance with or without PoE capability. This includes Wireless Access Points, Wired Switches, Network Appliances, Outdoor Wireless Routers and CCTV IP Cameras. A ground lug and terminal is provided to allow connection to the rack system ground. \u003cbr\u003e\u003cbr\u003e The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, IP Phones, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtects 4 Ethernet lines\u003c\/li\u003e\n\u003cli\u003e802.3af PoE compatible\u003c\/li\u003e\n\u003cli\u003eSupports shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003eField replaceable modules\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873943171,"sku":"CMSP-CAT5-4","price":190.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-4_43eb9bdf-1dae-4d46-ba63-0e019efa9e7e.jpeg?v=1787930450"},{"product_id":"indoor-8-port-med-power-10-100-base-t-cat5-lightning-surge-protector","title":"Indoor 8-Port Med Power 10\/100 Base-T CAT5 Lightning Surge Protector","description":"\u003cp\u003eThe CMSP-CAT5-8 provides protection for up two eight CAT5 data lines. The unit is fully compatible with industry-standard 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE power feed. The unit supports both 802.3af modes A and B supplying power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8. This arrestor is compatible with 10 and 100 Base-T Network appliance with or without PoE capability. This includes Wireless Access Points, Wired Switches, Network Appliances, Outdoor Wireless Routers and CCTV IP Cameras. The rugged aluminum housing can be wall or shelf mounted. Mounting holes are provided on the unit. A ground wire and lug is provided directly on the suppressor providing superior grounding. This protector is also available in a 24-port rack mount version, L-com part number RMSP-CAT5-24.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873943811,"sku":"CMSP-CAT5-8","price":264.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CAT5-8_137a8e32-8165-4b7c-920a-626912af897f.jpeg?v=1787931452"},{"product_id":"economy-in-line-10-100-base-t-cat5-lightning-surge-protector","title":"Economy In-Line 10\/100 Base-T CAT5 Lightning Surge Protector","description":"\u003cp\u003eThe ELP-CAT5 protects valuable equipment from static discharge, lightning and faulty wiring. In considering the cost of replacing damaged equipment and resultant lost productivity, the cost of an inline suppressor is small. Featuring RJ45 Jacks, these adapters easily connect in-line with existing data connections. A ground wire and lug is provided directly on the suppressor providing superior grounding. The ELP-CAT5 features a rugged aluminum housing for maximum durability. This protector is also available in a DIN mount version, see ELPD-CAT5. For more information and complete specification, click on the data sheet link. Note: This protector is not Power-Over-Ethernet (PoE) compatible.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873948035,"sku":"ELP-CAT5","price":67.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_ELP-CAT5_aacf16c8-e23b-4f4b-933c-c44d0a53dabc.jpeg?v=1787931707"},{"product_id":"economy-din-mount-in-line-10-100-base-t-cat5-lightning-surge-protector","title":"Economy DIN Mount In-Line 10\/100 Base-T CAT5 Lightning Surge Protector","description":"\u003cp\u003eThe ELPD-CAT5 protects valuable equipment from static discharge, lightning and faulty wiring. In considering the cost of replacing damaged equipment and resultant lost productivity, the cost of an inline suppressor is small. Featuring RJ45 Jacks, these adapters easily connect in-line with existing data connections. A ground lug is provided directly on the suppressor providing superior grounding. The ELPD-CAT5 features a rugged aluminum housing for maximum durability. This protector can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit. For multiple protector installations, 3 position, 5 position and 10 position busbars are available to combine all the protector grounds together. Click here for more information. For more information and complete specification, click on the data sheet link. Note: This protector is not Power-Over-Ethernet (PoE) compatible.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873948611,"sku":"ELPD-CAT5","price":64.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_ELPD-CAT5_68f5a2e7-29eb-4418-86e3-ea8b606a3153.jpeg?v=1787931406"},{"product_id":"indoor-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLN-CAT5-2 provides lightning and surge protection for CAT5 data applications. The unit is compatible with industry-standard IEEE 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed.\u003cbr\u003e\u003cbr\u003e High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 15 volts on pins, 1, 2, 3 and 6 and +\/- 58 volts on pins 4, 5, 7 and 8. The unit is compatible with both normal and inverted polarity voltage PoE equipment. Most PoE capable equipment is not protected from surges on it's CAT5 cable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5-2 features shielded RJ45 jacks. This along with the HGLN-CAT5-2's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT5-2 can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProtects 10\/100 Base-T Ethernet networks\u003c\/li\u003e\r\n\u003cli\u003ePower-over-Ethernet (PoE) compatible\u003c\/li\u003e\r\n\u003cli\u003eSupports reverse polarity PoE pinouts\u003c\/li\u003e\r\n\u003cli\u003eCompatible with Cisco Aironet  1100\/1200 AP and DC Injectors\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade Cast aluminum construction with shielded RJ-45 jacks and integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873950211,"sku":"HGLN-CAT5-2","price":86.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5-2_8832dd29-2c44-4a63-b48c-5f6496502b1e.jpeg?v=1787931515"},{"product_id":"indoor-high-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor High Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLN-CAT5-HP 3-stage lightning protector provides superior lightning and surge protection for indoor and outdoor 10\/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. This protector is compatible with any variation of PoE including 802.3af and proprietary systems from Airspan, Alvarion and Tranzeo. Also it will work with systems without PoE.\u003cbr\u003e\u003cbr\u003e In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eCisco Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5-HP features shielded RJ45 jacks. This along with the HGLN-CAT5-HP's metal housing helps reduce the effects of EMI interference.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Architecture\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The Advantage of the HGLN-CAT5-HP three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.\u003cbr\u003e\u003cbr\u003e Hyperlink's CAT5 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE). A ground lug and terminal is provided directly on the lightning protector housing, providing superior grounding. A second ground and terminal is provided for strapping multiple units together.\u003cbr\u003e\u003cbr\u003e For maximum protection from lightning on long cable runs, two HGLN-CAT5-HP's can be used -one at each end of the cable. Most PoE capable equipment is not protected from surges on it's CAT5 cable.\u003cbr\u003e\u003cbr\u003e This protector is also available in a weather resistant model, \u003ca href=\"\/item.aspx?id=22175%22\"\u003eAL-CAT5HPJW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below\u0026gt;\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection \u0026amp; Failsafe architecture\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ-45 jacks and metal housing for EMI noise suppression\u003c\/li\u003e\r\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\r\n\u003cli\u003eCisco  Reverse Polarity PoE compatible\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873951619,"sku":"HGLN-CAT5-HP","price":147.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5-HP_9eaa2d73-1285-41c7-b7b3-c7856e76263e.jpeg?v=1787933477"},{"product_id":"indoor-med-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor Med Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HyperLink HGLN-CAT5J is a compact indoor lightning surge arrestor which provides protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e This protector is also available for 15 Volt and 24 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=33510%22\"\u003eHGLN-CAT5J24\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The design utilizes Thyristor diode technology which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5J features shielded RJ45 jacks. This along with the HGLN-CAT5J's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT5J can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e This protector is also available in a weather resistant model, \u003ca href=\"\/item.aspx?id=20944\"\u003eAL-CAT5JW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e(2) Shielded RJ-45 jacks\u003c\/li\u003e\r\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet compatible and Cisco  Reverse Polarity PoE compatible\u003c\/li\u003e\r\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\r\n\u003cli\u003eSupports use of shielded CAT5 cable\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873951811,"sku":"HGLN-CAT5J","price":68.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5J_26c89c53-2e5f-48d0-a485-a7596231489b.jpeg?v=1787931593"},{"product_id":"indoor-med-power-10-100-base-t-shielded-24v-poe-cat5-lightning-surge-protector","title":"Indoor Med Power 10\/100 Base-T Shielded 24V PoE CAT5 Lightning Surge Protector","description":"The HGLN-CAT5J24 is a compact indoor lightning surge arrestor which provides protection for CAT5 data applications. The unit is fully compatible with 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both PoE modes A and B for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 36 volts on the four cable pairs. The unit is compatible with both normal and inverted polarity voltage PoE equipment. The design utilizes Thyristor diode technology which has superior power handling capability compared to TVS or Zener diode based designs. \u003cbr\u003e\u003cbr\u003e \u003cb\u003e15 Volt and 24 Volt PoE Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Designed to be compatible with 15V and 24V PoE devices, the HGLN-CAT5J24 is ideal for use with select devices from Motorola, Ubiquiti, Engenius and Planet as well as other PoE equipment requiring 15V or 24V.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eNote: This protector is not intended for use with standard 48V PoE devices.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This protector is also available for standard 48 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=23168%22\"\u003eHGLN-CAT5J\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5J24 features shielded RJ45 jacks. This along with the HGLN-CAT5J24's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT5J24's can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eCompatible with 15V and 24V Power-Over-Ethernet (PoE) devices\u003c\/li\u003e\r\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\r\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ-45 jacks, support for shielded CAT5 cable\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873952195,"sku":"HGLN-CAT5J24","price":91.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5J.jpeg?v=1787932159"},{"product_id":"indoor-din-mount-high-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor DIN Mount High Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLND-CAT5-HP DIN mountable 3-stage lightning protector provides superior lightning and surge protection for indoor and outdoor 10\/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. This protector is compatible with any variation of PoE including 802.3af and proprietary systems from Airspan, Alvarion and Tranzeo. Also it will work with systems without PoE.\u003cbr\u003e\u003cbr\u003e In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.\u003cbr\u003e\u003cbr\u003e The HGLND-CAT5-HP features shielded RJ45 jacks. This along with the metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the lightning protector housing, providing superior grounding. A second ground and terminal is provided for strapping multiple units together.\u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\r\n\u003cli\u003eThree stage protection \u0026amp; failsafe architecture\u003c\/li\u003e\r\n\u003cli\u003eSupports PoE mode B for power\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with shielded RJ-45 jacks\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873959299,"sku":"HGLND-CAT5-HP","price":204.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CAT5-HP_042e2c47-5aca-4c34-bc80-2801c21f2eea.jpeg?v=1787932068"},{"product_id":"indoor-din-mount-med-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor DIN Mount Med Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLND-CAT5J is a compact indoor DIN rail mountable lightning surge arrestor which provides protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e The HGLND-CAT5J features shielded RJ45 jacks. This along with the metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. The unit also supports the use of shielded CAT5 cable.\u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\r\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet compatible\u003c\/li\u003e\r\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with shielded RJ-45 jacks\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873960451,"sku":"HGLND-CAT5J","price":132.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CAT5J_6fb1e35e-1045-44b4-87cc-a167f8fad66f.jpeg?v=1787931615"},{"product_id":"in-wall-electrical-box-mount-10-100-base-cat5-lightning-surge-protector","title":"In-Wall Electrical Box Mount 10\/100 Base CAT5 Lightning Surge Protector","description":"The WPCAT5 is an indoor lightning and surge protector which provides protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e    This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eElectrical Box Mount\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The WPCAT5 features a brushed stainless steel wall plate designed to mount to standard in-wall electrical\/conduit boxes. This protector is ideal for use in homes and offices with existing in-wall Ethernet wiring. A ground lug is provided directly on the protector and mounting screws are included.\u003cbr\u003e\u003cbr\u003e     \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The WPCAT5 features shielded RJ-45 jacks. This along with the stainless steel wall plate helps reduce the effects of EMI interference.\u003cbr\u003e\u003cbr\u003e    For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003e(2) shielded RJ-45 jacks\u003c\/li\u003e\n\u003cli\u003eBrushed stainless steel wall plate\u003c\/li\u003e\n\u003cli\u003e802.3af mode A and B PoE compatible\u003c\/li\u003e\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\n\u003cli\u003eSupports use of shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873972867,"sku":"WPCAT5","price":52.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_WPCAT_2751dad1-d335-4bed-b7fe-9da0aefb410a.jpeg?v=1787933146"}],"url":"https:\/\/itm-components.co.uk\/collections\/cat-5-ethernet.oembed?page=2","provider":"ITM Components","version":"1.0","type":"link"}