{"title":"Heating System","description":"","products":[{"product_id":"14x12x7-inch-120-vac-weatherproof-enclosure-with-heating-system","title":"14x12x7 Inch 120 VAC Weatherproof Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NB141207-1H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStart with the Box...\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The box is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass reinforced polyester, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The raised lid is fully gasketed. The enclosure material is UV stabilized and comes in machine tool gray.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eMounting Plate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more. With the optional \u003cb\u003e\u003ca href=\"\/item.aspx?ID=22157%22\"\u003eHGX-AMOUNT02\u003c\/a\u003e\u003c\/b\u003e bracket a wide array of HyperLink Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the \u003cb\u003e\u003ca href=\"\/item.aspx?ID=29961\"\u003eHGX-NMOUNT03\u003c\/a\u003e\u003c\/b\u003e Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features four standard surge protected 120 VAC outlets and a terminal strip to supply power to internal equipment.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eCold Environments\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.\u003cbr\u003e\u003cbr\u003e    The NB141207-1H0 includes a thermostat-controlled 200W heating system. The heater turns on when the internal temperature drops to 40° F (4° C) ±7° and turns off at 60° F (15° C) ±5°. The heater does not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heater is required since it is mounted underneath the plate.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eLightning Protection\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Mounted to the optional HGX-AMOUNT02 bracket, the HGLN-CAT5 lightning protector can be used with Power-over-Ethernet applications.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid  integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with surge protected duplex 120 VAC Outlets  Thermostat Controlled Heating System\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247716163,"sku":"NB141207-1H0","price":476.06,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NB141207-1H0_8e33f256-01b1-48d2-b7b2-1fc86e9521ff.jpeg?v=1757079531"},{"product_id":"14x12x7-inch-240-vac-weatherproof-enclosure-with-heating-system","title":"14x12x7 Inch 240 VAC Weatherproof Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NB141207-2H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStart with the Box...\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The NB141207-2H0 is designed to protect sensitive equipment from the elements and supply it with proper airflow. The unit features a thermostat controlled 200W heating system, along with provisions for connecting AC power, data or RF cables to the enclosure. Additional holes can be added to the enclosure for custom orders.\u003cbr\u003e\u003cbr\u003e The Enclosure is a rugged weatherproof design that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass reinforced polyester, it is well suited for high temperatures or corrosive environments. The integral mounting flange allows mounting on any flat surface. When used with it's optional mounting brackets, the unit can mount to a pole or column. The raised lid features a continuous stainless steel hinge and quick release stainless steel latches with padlock hasps. The raised lid features a full gasket to block water intrusion. The enclosure material is UV stabilized and comes in machine tool gray. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eMounting Plate... \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more (see mounting plate drawing). With the optional \u003cb\u003e\u003ca href=\"\/item.aspx?ID=22157%22\"\u003eHGX-AMOUNT02\u003c\/a\u003e\u003c\/b\u003e bracket a wide array of HyperLink Amplifiers, Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the \u003cb\u003e\u003ca href=\"\/item.aspx?ID=29961\"\u003eHGX-NMOUNT03\u003c\/a\u003e\u003c\/b\u003e Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eCold Environments...\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The NB141207-2H0 includes a thermostat-controlled 200W heating system. The heater turns on when the internal temperature drops to 40° F (4° C) ° and turns off at 60° F (15° C)°. No extra room for the heater is required since it is mounted underneath the plate.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eLightning Protection...\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Additional N-Type lightning protectors can be added on custom orders. Mounted to the optional HGX-AMOUNT02 bracket, the HGLN-CAT5 lightning protector can be used with Power-over-Ethernet applications.\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with 240 VAC terminal strip Thermostat Controlled Heating System\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247721603,"sku":"NB141207-2H0","price":364.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NB141207-2H0_13606d9a-a313-49ff-ae8a-366555960c9b.jpeg?v=1757079527"},{"product_id":"14x12x7-inch-48vdc-poe-powered-weatherproof-insulated-enclosure-with-heating-system","title":"14x12x7 Inch 48VDC PoE PoweRed Weatherproof \u0026 Insulated Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NB141207-4H0N.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStart with the Box... \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The box is a rugged weatherproof NEMA Type 4X insulated enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass reinforced polyester, it is well suited for hot or cold temperatures. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The raised lid is fully gasketed. The enclosure material is UV stabilized and comes in machine tool gray.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eSub-zero Applications\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The NB141207-4H0N enclosure is designed for use in sub-zero environments down to -30°F (-34°C). It features a 48 VDC thermostat controlled heating system that will along with the heat generated by an internal device such as an access point, maintain a nominal internal ambient temperature of +40°F (4°C). A single CAT5 cable provides power to the heating system from a remote mounted DC Injector and Power Supply which are included with the enclosure. An additional CAT5 cable would then be used to supply data and power to installed PoE equipment.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eMounting Plate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more. With the optional \u003cb\u003e\u003ca href=\"\/item.aspx?ID=22157%22\"\u003eHGX-AMOUNT02\u003c\/a\u003e\u003c\/b\u003e bracket a wide array of HyperLink products can be mounted as well. Two of these brackets can be mounted side by side. Also available is the \u003cb\u003e\u003ca href=\"\/item.aspx?ID=29961\"\u003eHGX-NMOUNT03\u003c\/a\u003e\u003c\/b\u003e Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eThis enclosure includes:\u003c\/b\u003e\u003cbr\u003e  \u003cul\u003e  \u003cli\u003e (1) BT-CAT5-NB2 - DC Injector: used to supply heating system power to a single NB141207-4H0N Sub-Zero Heated Enclosure.\u003cbr\u003e  \u003c\/li\u003e  \u003cli\u003e (1) PS4870-25R - 70W Power Supply for BT-CAT5-NB2 DC Injector: 48VDC@70W, 110\/220 VAC, 2.5mm DC Plug\u003cbr\u003e  \u003c\/li\u003e  \u003c\/ul\u003e    \u003cb\u003eAdditional Applications\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    For applications requiring multiple enclosure installations we recommend purchasing the \u003cb\u003e\u003ca href=\"\/item.aspx?id=29964\"\u003eBT-CAT5-NB12\u003c\/a\u003e\u003c\/b\u003e. This rack mount DC Injector can supply power for up to 12 NB141207-4H0N-1 heated enclosures. \u003cbr\u003e\u003cbr\u003e    \u003cb\u003eApplication Diagram\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    \u003cp align=\"center\"\u003e\u003cimg src=\"\/multimedia\/diagrams\/D_NB141207-4H0_2.GIF\" width=\"600\" height=\"566\"\u003e\u003c\/p\u003e    \u003cfont color=\"#FF0000\"\u003e\u003cb\u003eApplication Note:\u003cbr\u003e  The Hyperlink NB141207-4H0N sub-zero NEMA enclosure uses a proprietary wiring pin out. The RJ-45 connectors on the NB141207-4H0N sub-zero NEMA enclosure or the Hyperlink sub-zero DC power injector, should never be connected to any other manufacturers equipment. Hyperlink Technologies, Inc. is not liable for any damage done to incompatible equipment due to misuse of the Hyperlink sub-zero NEMA equipment.\u003c\/b\u003e\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure with Foam insulation to minimize heat loss in sub-zero installations\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid  integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate  Thermostat-controlled heating system \u003cbr\u003e\u003cb\u003ePower provided to the heating system from remote mounted DC Injector and Power Supply (Included)\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247731907,"sku":"NB141207-4H0N","price":624.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NB141207-4H0N_11046c05-f7d0-47ac-9362-50f581ca5313.jpeg?v=1757079522"},{"product_id":"14x12x7-inch-universal-200-240-vac-weatherproof-enclosure-with-heating-system","title":"14x12x7 Inch Universal 200-240 VAC Weatherproof Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NB141207-EH0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStart with the Box\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The box is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass reinforced polyester, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The raised lid has a full edge gasket. The enclosure material is UV stabilized and comes in machine tool gray.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eMounting Plate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more (see mounting plate drawing). With the optional \u003cb\u003e\u003ca href=\"\/item.aspx?ID=22157%22\"\u003eHGX-AMOUNT02\u003c\/a\u003e\u003c\/b\u003e bracket a wide array of HyperLink Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the \u003cb\u003e\u003ca href=\"\/item.aspx?ID=29961\"\u003eHGX-NMOUNT03\u003c\/a\u003e\u003c\/b\u003e Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features two 240 VAC Universal EURO outlets (contained in one duplex socket) and a terminal strip to supply power to internal equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eCold Environments...\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.\u003cbr\u003e\u003cbr\u003e The NB141207-EH0 includes a 200-240V thermostat-controlled 200W heater. The 200W heater is controlled by its own thermostat. The heater turns on when the internal temperature drops to 40° C) and turns off at 60° F (15° C). No extra room for the heater is required since it is mounted underneath the plate.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eLightning Protection\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Mounted to the optional HGX-AMOUNT02 bracket, the \u003cb\u003e\u003ca href=\"\/item.aspx?id=10033\"\u003eHGLN-CAT5-2\u003c\/a\u003e\u003c\/b\u003e lightning protector can be used with Power-over-Ethernet applications.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with Universal duplex socket for 200-240 VAC power Thermostat Controlled Heating System\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247736707,"sku":"NB141207-EH0","price":343.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NB141207-EH0_1288505c-6f1c-4cf8-99b1-7984b85797b4.jpeg?v=1757079518"},{"product_id":"18x16x8-inch-120-vac-weatherproof-enclosure-with-heating-system","title":"18x16x8 Inch 120 VAC Weatherproof Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NB181608-1H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStart with the Box...\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The box is a rugged 18 x 16\" x 8\" weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The box can also be pole mounted with the optional pole mounting hardware kit. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The enclosure material is UV stabilized and comes in machine tool gray. The enclosure also features holes for mounting Lightning Protectors or Connectors, a grounding lug and                      ¯¿½ cable conduit connector. \u003cbr\u003e\u003cbr\u003e Due to the large size of this enclosure, it can accommodate dual sets of most access points.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eMounting Plate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more. With the optional \u003cb\u003e\u003ca href=\"\/item.aspx?ID=22157\"\u003eHGX-AMOUNT02\u003c\/a\u003e\u003c\/b\u003e bracket a wide array of HyperLink Amplifiers, Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the \u003cb\u003e\u003ca href=\"\/item.aspx?ID=29961\"\u003eHGX-NMOUNT03\u003c\/a\u003e\u003c\/b\u003e Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features four standard surge protected 120 VAC outlets and a terminal strip to supply power to internal equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eCold Environments\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.\u003cbr\u003e\u003cbr\u003e The NB181608-1H0 includes two thermostat-controlled 200W (400W total) heaters. Each 200W heater is controlled by its own thermostat. The heaters turns on when the internal temperature drops to 40                     ° F (4                     ° C)                      ±7                     ° and turns off at 60                     ° F (15                     ° C)                      ±5                     °. The heaters do not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heaters is required since it is mounted underneath the plate.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eLightning Protection\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Mounted to the optional HGX-AMOUNT02 bracket, the HGLN-CAT5 lightning protector can be used with Power-over-Ethernet applications.\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid  integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with surge protected duplex 120 VAC Outlets  Thermostat Controlled Heating System\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247754179,"sku":"NB181608-1H0","price":682.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_NB181608-1H0_0b6de521-fbcf-419c-b9a8-056b5894875e.jpeg?v=1757079499"},{"product_id":"18x16x8-inch-240-vac-weatherproof-enclosure-with-heating-system","title":"18x16x8 Inch 240 VAC Weatherproof Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NB181608-2H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eStart with the Box...\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The box is a rugged 18 x 16\" x 8\" weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The box can also be pole mounted with the optional pole mounting hardware kit. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The enclosure material is UV stabilized and comes in machine tool gray. The enclosure also features holes for mounting Lightning Protectors or Connectors, a grounding lug and cable conduit connector.\u003cbr\u003e\u003cbr\u003e Due to the large size of this enclosure, it can accommodate dual sets of most access points.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eMounting Plate\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more. With the optional \u003cb\u003e\u003ca href=\"\/item.aspx?ID=22157\"\u003eHGX-AMOUNT02\u003c\/a\u003e\u003c\/b\u003e bracket a wide array of HyperLink Amplifiers, Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the \u003cb\u003e\u003ca href=\"\/item.aspx?ID=29961\"\u003eHGX-NMOUNT03\u003c\/a\u003e\u003c\/b\u003e Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features four standard surge protected 240 VAC outlets and a terminal strip to supply power to internal equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eCold Environments\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.\u003cbr\u003e\u003cbr\u003e The NB181608-2H0 includes two thermostat-controlled 200W (400W total) heaters. Each 200W heater is controlled by its own thermostat. The heaters turns on when the internal temperature drops to 40                     ° F (4                     ° C)                      ±7                     ° and turns off at 60                     ° F (15                     ° C)                      ±5                     °. The heaters do not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heaters is required since it is mounted underneath the plate.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eLightning Protection\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Mounted to the optional HGX-AMOUNT02 bracket, the HGLN-CAT5 lightning protector can be used with Power-over-Ethernet applications.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with 240 VAC terminal strip Thermostat Controlled Heating System\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247763907,"sku":"NB181608-2H0","price":718.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NB181608-2H0_d325bc3d-9573-4de4-8037-e1886ffa2e2e.jpeg?v=1757079496"},{"product_id":"14x12x6-inch-120-vac-steel-weatherproof-enclosure-with-heating-system","title":"14x12x6 Inch 120 VAC Steel Weatherproof Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NBS141206-1H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eThe NBS141206-1H0 is designed to provide protection, indoors and outdoors, against dust, dirt, oil, and water for items such as pneumatic or hydraulic instruments, transformers, and junction wiring. These enclosures are for use in areas such as shop floors, process controls, agriculture operations, food and beverage operations where they are subject to frequent high-pressure hosing, dirt, grime and generally wet conditions.\u003cbr\u003e\u003cbr\u003e The NBS141206-1H0 enclosure is made from 14ga. hot rolled steel. All seams are continuously welded and each enclosure comes with four 10-32 weld nuts. Grounding studs are provided on the inside of the box and door, and wall mounting back brackets are welded on the top and bottom outside. The enclosure door is sealed with a one piece neoprene gasket and is secured to the enclosure with a continuous stainless steel piano hinge on one side and stainless steel door clamping hardware on three sides. All enclosures are phosphatized and finished inside and out with ANSI\/ASA 61 grey polyester powder coating.\u003cbr\u003e\u003cbr\u003e The aluminum mounting plate has provisions to mount various equipment types such as WLAN devices. With the optional HGX-AMOUNT02 bracket a wide array of L-com PoE products and power supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the HGX-NMOUNT03 Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features four standard surge protected 120 VAC outlets and a terminal strip to supply power to internal equipment.\u003cbr\u003e\u003cbr\u003e To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside the enclosure need to be maintained. With the built-in heating system, internal temperatures can be better maintained.\u003cbr\u003e\u003cbr\u003e Ideal for cold environments, the NBS141206-1H0 includes a thermostat controlled 200W heating system. The heater turns on when the internal temperature drops to 40    °F (4    °C)     ±7    ° and turns off at 60    °F (15    °C)     ±5    °. The heater does not require the use of any of the AC outlets, leaving them available for your equipment. No extra room for the heater is required since it is mounting underneath the plate.\u003cbr\u003e\u003cbr\u003e The enclosure has provision for up to two optional bulkhead mounted N-Type lightning protectors for coaxial cable runs. Included with the enclosure is a 1\/2 cable conduit connector and grounding lug.\u003cbr\u003e\u003cbr\u003e The NBS141206-100 is built to the requirements of NEMA\/EEMAC type 12 specifications for use with industrial control equipment in ordinary locations, type 13 for an oil and dust tight enclosure, and type 4,4X as a water tight corrosion resistant enclosure. The NBS141206 is available with CSA and UL 508 certifications as an option.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eHot Rolled Steel coated with Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003eFully gasketed lid with (6) stainless steel lid clamping latches\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with surge protected duplex 120 VAC outlets\u003c\/li\u003e\n\u003cli\u003eThermostat controlled heating system\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247845507,"sku":"NBS141206-1H0","price":610.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NBS141206-1H0_c091993f-10d9-433d-a12b-1789c4876fbf.jpeg?v=1757079440"},{"product_id":"14x12x7-inch-120-vac-weatherproof-windowed-enclosure-with-heating-system","title":"14x12x7 Inch 120 VAC Weatherproof Windowed Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NBW141207-1H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eL-com's  HyperLink brand 120 VAC NEMA rated enclosures offer 120 Volt AC power to accommodate access points, routers, and other communications equipment that require 120 Volt AC power. Options include vented doors, fans, and heaters for addressing extreme environmental conditions. Enclosure sizes are available in 14 x 10\" x 4\", 14\" x 12\" x 7\" and 18\" x 16\" x 8\".\"\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eMolded fiberglass reinforced polyester enclosure\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid  integral mounting flange\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4X \/ IP65 rated*\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate  120 VAC Outlets\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247854851,"sku":"NBW141207-1H0","price":610.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NBW141207-1H0_e05a597e-5bb9-4ef3-9b35-50762c6812fc.jpeg?v=1757079432"},{"product_id":"18x16x8-inch-120-vac-weatherproof-windowed-enclosure-with-heating-system","title":"18x16x8 Inch 120 VAC Weatherproof Windowed Enclosure with Heating System","description":"\u003cb\u003e\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NBW181608-1H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003eL-com's HyperLink brand 120 VAC NEMA rated windowed enclosures offer 120 Volt AC power to accommodate access points, routers, and other communications equipment that require 120 Volt AC power.\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure with Lexan Window\u003c\/li\u003e\n\u003cli\u003eStainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed raised lid  integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with surge protected duplex 120 VAC Outlets  Thermostat Controlled Heating System\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":2247864195,"sku":"NBW181608-1H0","price":538.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NBW181608-1H0_fa13376f-0dc1-4cfd-8e9d-2efb46601c4e.jpeg?v=1757079428"},{"product_id":"nbb181608-1hf-18x16x8-inch-120vac-black-weatherproof-enclosure-w-cooling-fans-and-heating-system","title":"18x16x8 Inch 120VAC Black Weatherproof Enclosure w\/ Cooling Fans and Heating System","description":"\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_NBB181608-1HF.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe NBB181608-1HF is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded halogen free self extinguishing fiberglass reinforced polyester (FRP), it is well suited for high temperature or corrosive environments. The integral mounting flange allows it to be wall mounted as well as on a flat surface without the need for extra mounting hardware. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The black color of the NBB series makes these enclosures ideal for security and surveillance equipment since they blend in easier with existing municipality landscapes. The contoured body provides an attractive and contemporary appearance. Due to the large size of this enclosure, it can accommodate dual sets of most access points.\u003c\/p\u003e\n\u003cp\u003eThe aluminum mounting plate features standard surge protected duplex 120 VAC outlets and a terminal block for easy hook up to the externally provided line power. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs.\u003c\/p\u003e\n\u003cp\u003eTo help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Heater and Cooling system, internal temperatures can be better maintained. This model is ideal in Hot and Cold environments.\u003c\/p\u003e\n\u003cp\u003eThe NBB181608-1HF includes two thermostat-controlled 200W (400W total) heaters. Each heater is controlled by its own thermostat. The heaters turns on when the internal temperature drops to 40° F (4° C) ±7° and turns off at 60° F (15° C) ±5°. The heaters do not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heaters is required since it is mounted underneath the plate.\u003c\/p\u003e\n\u003cp\u003eFor cooling, two thermostat-controlled 12W (24W total) high airflow, low noise fans allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for cleaning and replacement. The fans turn on when the internal temperature rises to 120° F (49° C) ±5° and turns off at 90° F (32° C) ±10°. Like the heaters, the cooling fans do not require the use of any of the AC outlets, leaving them all available for your equipment.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":16480859270,"sku":"NBB181608-1HF","price":826.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NBB181608-1HF.jpeg?v=1757077138"},{"product_id":"nbb141207-1hf-14x12x7-inch-120vac-black-weatherproof-enclosure-w-cooling-fan-and-heating-system","title":"NBB141207-1HF - 14x12x7 Inch 120VAC Black Weatherproof Enclosure w\/ Cooling Fan and Heating System","description":"\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_NBB141207-1HF.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe NBB141207-1HF is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded halogen free self extinguishing fiberglass reinforced polyester (FRP), it is well suited for high temperature or corrosive environments. The integral mounting flange allows it to be wall mounted as well as on a flat surface without the need for extra mounting hardware. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The black color of the NBB series makes these enclosures ideal for security and surveillance equipment since they blend in easier with existing municipality landscapes. The contoured body provides an attractive and contemporary appearance.\u003c\/p\u003e\n\u003cp\u003e120 VAC Mounting Plate with Lightning Protection\u003c\/p\u003e\n\u003cp\u003eThe aluminum mounting plate features standard surge protected duplex 120 VAC outlets and a terminal block for easy hook up to the externally provided line power. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs.\u003c\/p\u003e\n\u003cp\u003eHot and Cold Environments\u003c\/p\u003e\n\u003cp\u003eTo help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Heater and Cooling system, internal temperatures can be better maintained. This model is ideal in Hot and Cold environments.\u003c\/p\u003e\n\u003cp\u003eThe NBB141207-1HF includes a thermostat-controlled 200W heating system. The heater turns on when the internal temperature drops to 40° F (4° C) ±7° and turns off at 60° F (15° C) ±5°. The heater does not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heater is required since it is mounted underneath the plate.\u003c\/p\u003e\n\u003cp\u003eFor cooling, the thermostat-controlled 12W high airflow, low noise fan allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for cleaning and replacement. The fan turns on when the internal temperature rises to 120° F (49° C) ±5° and turns off at 90° F (32° C) ±10°. Like the heater, the cooling fan does not require the use of any of the AC outlets, leaving them all available for your equipment.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":16480860486,"sku":"NBB141207-1HF","price":592.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NBB141207-1HF.jpeg?v=1757077135"},{"product_id":"nbb141207-1h0-14x12x7-inch-120vac-black-weatherproof-enclosure-with-intergral-heating-system","title":"NBB141207-1H0 - 14x12x7 Inch 120VAC Black Weatherproof Enclosure with Intergral Heating System","description":"\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_NBB141207-1H0.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe NBB141207-1H0 is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded halogen free self extinguishing fiberglass reinforced polyester (FRP), it is well suited for high temperature or corrosive environments. The integral mounting flange allows it to be wall mounted as well as on a flat surface without the need for extra mounting hardware. The fully gasketed raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The black color of the NBB series makes these enclosures ideal for security and surveillance equipment since they blend in easier with existing municipality landscapes. The contoured body provides an attractive and contemporary appearance.\u003c\/p\u003e\n\u003cp\u003e120 VAC Mounting Plate with Lightning Protection\u003c\/p\u003e\n\u003cp\u003eThe aluminum mounting plate features standard surge protected duplex 120 VAC outlets and a terminal block for easy hook up to the externally provided line power. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs.\u003c\/p\u003e\n\u003cp\u003eCold Environments\u003c\/p\u003e\n\u003cp\u003eTo help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.\u003c\/p\u003e\n\u003cp\u003eThe NBB141207-1H0 includes a thermostat-controlled 200W heating system. The heater turns on when the internal temperature drops to 40° F (4° C) ±7° and turns off at 60° F (15° C) ±5°. The heater does not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heater is required since it is mounted underneath the plate.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":16480860614,"sku":"NBB141207-1H0","price":359.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NBB141207-1H0.jpeg?v=1757077135"},{"product_id":"nb201611-1hf-20x16x11-inch-120vac-weatherproof-enclosure-w-dual-cooling-fans-and-heating-system","title":"20x16x11 Inch 120VAC Weatherproof Enclosure w\/ Dual Cooling Fans and Heating System","description":"\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_NB201611-1HF.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe NB201611-1HF is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded halogen free self extinguishing fiberglass reinforced polyester (FRP), it is well suited for high temperature or corrosive environments. The integral mounting flange allows it to be wall mounted as well as on a flat surface without the need for extra mounting hardware. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The light grey color of the NB201611-1HF is cleaner, cooler and aesthetically pleasing. Users can enjoy the physical benefits of better heat reflection and better UV resistance due to the lighter color. The contoured body provides an attractive and contemporary appearance. Due to the large size of this enclosure, it can accommodate dual sets of most access points.\u003c\/p\u003e\n\u003cp\u003e120 VAC Mounting Plate with Lightning Protection\u003c\/p\u003e\n\u003cp\u003eThe aluminum mounting plate features standard surge protected duplex 120 VAC outlets and a terminal block for easy hook up to the externally provided line power.\u003c\/p\u003e\n\u003cp\u003eHot and Cold Environments\u003c\/p\u003e\n\u003cp\u003eTo help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Heater and Cooling system, internal temperatures can be better maintained. This model is ideal in Hot and Cold environments. The NB201611-1HF includes two thermostat-controlled 200W (400W total) heaters. Each 200W heater is controlled by its own thermostat. The heaters turns on when the internal temperature drops to 40° F (4° C) ±7° and turns off at 60° F (15° C) ±5°. The heaters do not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heaters is required since it is mounted underneath the plate.\u003c\/p\u003e\n\u003cp\u003eFor cooling, the two thermostat-controlled 12W (24W total) high airflow, low noise fans used allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for cleaning and replacement. The fans turn on when the internal temperature rises to 120° F (49° C) ±5° and turns off at 90° F (32° C) ±10°. Like the heaters, the cooling fans do not require the use of any of the AC outlets, leaving them all available for your equipment.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":16480862278,"sku":"NB201611-1HF","price":1176.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NB201611-1HF.jpeg?v=1757077132"},{"product_id":"nb201611-1h0-20x16x11-inch-120vac-weatherproof-enclosure-with-intergral-heating-system","title":"20x16x11 Inch 120VAC Weatherproof Enclosure with Intergral Heating System","description":"\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_NB201611-1H0.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eThe NB201611-1H0 is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded halogen free self extinguishing fiberglass reinforced polyester (FRP), it is well suited for high temperature or corrosive environments. The integral mounting flange allows it to be wall mounted as well as on a flat surface without the need for extra mounting hardware. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The light grey color of the NB201611-1H0 is cleaner, cooler and aesthetically pleasing. Users can enjoy the physical benefits of better heat reflection and better UV resistance due to the lighter color. The contoured body provides an attractive and contemporary appearance. Due to the large size of this enclosure, it can accommodate dual sets of most access points.\u003c\/p\u003e\n\u003cp\u003e120 VAC Mounting Plate with Lightning Protection\u003c\/p\u003e\n\u003cp\u003eThe aluminum mounting plate features standard surge protected duplex 120 VAC outlets and a terminal block for easy hook up to the externally provided line power.\u003c\/p\u003e\n\u003cp\u003eCold Environments\u003c\/p\u003e\n\u003cp\u003eTo help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.\u003c\/p\u003e\n\u003cp\u003eThe NB201611-1H0 includes two thermostat-controlled 200W (400W total) heaters. Each 200W heater is controlled by its own thermostat. The heaters turns on when the internal temperature drops to 40° F (4° C) ±7° and turns off at 60° F (15° C) ±5°. The heaters do not require the use of any of the AC outlets, leaving them all available for your equipment. No extra room for the heaters is required since it is mounted underneath the plate.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":16480862470,"sku":"NB201611-1H0","price":1176.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NB201611-1H0.jpeg?v=1757077131"},{"product_id":"nbc141206-1h0-14x12x6-inch-120-vac-weatherproof-enclosure-with-heating-system","title":"14x12x6 Inch 120 VAC Weatherproof Enclosure with Heating System","description":"\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/NBC141206-1H0.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cp\u003eL-com's HyperLink brand 120 VAC NEMA rated enclosures offer 120 Volt AC power to accommodate access points, routers, and other communications equipment that require 120 Volt AC power. Options include vented doors, fans, and heaters for addressing extreme environmental conditions.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure made from hot compression molded halogen free, self extinguishing fiberglass reinforced polyester\u003c\/li\u003e\n\u003cli\u003eStainless steel cover screws\u003c\/li\u003e\n\u003cli\u003eNEMA Type 4, 4X \/ IP66 rated\u003c\/li\u003e\n\u003cli\u003eFully gasketed screw down lid \u0026amp; integral mounting flange\u003c\/li\u003e\n\u003cli\u003eFeatures modified base \u0026amp; aluminum mounting plate with surge protected duplex 120 VAC Outlets \u0026amp; Thermostat Controlled Heating System\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eApplications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemote Wireless LAN WiFi equipment installations\u003c\/li\u003e\n\u003cli\u003eIndoor and outdoor installations\u003c\/li\u003e\n\u003cli\u003eRapid Deployment Installations\u003c\/li\u003e\n\u003cli\u003eCorrosive environments \u0026amp; hotspot applications\u003c\/li\u003e\n\u003cli\u003eProtection of equipment from theft or damage\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":42210965836,"sku":"NBC141206-1H0","price":432.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_NBC141206-1H0.jpg?v=1757077127"},{"product_id":"nb181608-1hvs-18x16x8-inch-120vac-gray-vented-weatherproof-enclosure-w-solid-state-controlled-heating-system","title":"18x16x8 Inch 120VAC Gray Vented Weatherproof Enclosure w\/Solid State Controlled Heating System","description":"\u003cp\u003e\u003ca href=\"https:\/\/www.l-com.com\/Images\/Downloadables\/Datasheets\/ds_NB181608-1HVS.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe NB181608-1HVS is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded halogen free self extinguishing fiberglass reinforced polyester (FRP), it is well suited for high temperature or corrosive environments. The integral mounting flange allows it to be wall mounted as well as on a flat surface without the need for extra mounting hardware. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The contoured body provides an attractive and contemporary appearance. Due to the large size of this enclosure, it can accommodate dual sets of most access points.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Vented Enclosure\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe NB181608-1HVS features a vented lid with removable filters and vent covers on the outside of the enclosure.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e 120 VAC Mounting Plate with Lightning Protection\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe aluminum mounting plate features standard surge protected duplex 120 VAC outlets and a terminal block for easy hook up to the externally provided line power. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Cold Environments\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.\u003c\/p\u003e\n\u003cp\u003eThe NB181608-1HVS comes with two 120 VAC 200 watt heating elements. The heaters are controlled by HyperLink's exclusive solid-state temperature controller. The standard unit has a heat turn-on temperature of +16° F (-8.8° C). The controller features improved temperature setpoint accuracy and can be factory modified for other temperature setpoints. The heater is controlled by an integral high current solid-state AC relay. The relay features Zero Cross Detection for EMI reduction. No extra room for the controller is required since it is mounted underneath the plate.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNEMA Type 3R, 3RX \/ IP24 rated\u003c\/li\u003e\n\u003cli\u003eFeatures aluminum mounting plate with surge protected duplex 120 VAC outlets \u0026amp; solid state controlled heating system\u003c\/li\u003e\n\u003cli\u003eFully gasketed vented lid with stainless steel quick release latches with padlock hasps\u003c\/li\u003e\n\u003cli\u003eMolded Fiberglass Reinforced Polyester (FRP) industrial Enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCorrosive environments \u0026amp; hotspot applications\u003c\/li\u003e\n\u003cli\u003eRapid Deployment Installations\u003c\/li\u003e\n\u003cli\u003eRemote Wireless LAN WiFi equipment installations\u003c\/li\u003e\n\u003cli\u003eIndoor and outdoor installations\u003c\/li\u003e\n\u003cli\u003eProtection of equipment from theft or damage\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":31912584282172,"sku":"NB181608-1HVS","price":269.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/NB181608-1HVS_250x250_View1.jpg?v=1757077089"}],"url":"https:\/\/itm-components.co.uk\/collections\/heating-system.oembed","provider":"ITM Components","version":"1.0","type":"link"}