{"title":"Indoor Lightning Protector","description":"","products":[{"product_id":"indoor-2-port-med-power-10-100-base-t-cat5-lightning-surge-protector","title":"Indoor 2-Port Med Power 10\/100 Base-T CAT5 Lightning Surge Protector","description":"\u003cp\u003eThe CMSP-CAT5-2 provides protection for two CAT5 data lines. The unit is fully compatible with industry-standard 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE power feed. The unit supports both 802.3af modes A and B supplying power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8. Each module supports both AC and +\/- DC power. The CMSP-CAT5-2 features shielded RJ45 jacks for use with of shielded CAT5 cable. This arrestor is compatible with 10 and 100 Base-T Network appliance with or without PoE capability. This includes Wireless Access Points, Wired Switches, Network Appliances, Outdoor Wireless Routers and CCTV IP Cameras. A ground lug and terminal is provided to allow connection to the rack system ground. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable. This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, IP Phones, DC Injectors and other equipment supporting reverse polarity PoE pinouts. This protector is also available in a 4-port version, L-com part number CMSP-CAT5-4.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873942339,"sku":"CMSP-CAT5-2","price":138.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-2_134e3a40-2aca-444f-9893-c98143559384.jpeg?v=1787932513"},{"product_id":"indoor-4-port-med-power-10-100-base-t-cat5-lightning-surge-protector","title":"Indoor 4-Port Med Power 10\/100 Base-T CAT5 Lightning Surge Protector","description":"The CMSP-CAT5-4 provides protection for four CAT5 data lines. The unit is fully compatible with industry-standard 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE power feed. The unit supports both 802.3af modes A and B supplying power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8. Each module supports both AC and +\/- DC power. The CMSP-CAT5-4 features shielded RJ45 jacks for use with of shielded CAT5 cable.\u003cbr\u003e\u003cbr\u003e This arrestor is compatible with 10 and 100 Base-T Network appliance with or without PoE capability. This includes Wireless Access Points, Wired Switches, Network Appliances, Outdoor Wireless Routers and CCTV IP Cameras. A ground lug and terminal is provided to allow connection to the rack system ground. \u003cbr\u003e\u003cbr\u003e The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, IP Phones, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtects 4 Ethernet lines\u003c\/li\u003e\n\u003cli\u003e802.3af PoE compatible\u003c\/li\u003e\n\u003cli\u003eSupports shielded CAT5 cable\u003c\/li\u003e\n\u003cli\u003eField replaceable modules\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873943171,"sku":"CMSP-CAT5-4","price":190.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-4_43eb9bdf-1dae-4d46-ba63-0e019efa9e7e.jpeg?v=1787930450"},{"product_id":"indoor-8-port-med-power-10-100-base-t-cat5-lightning-surge-protector","title":"Indoor 8-Port Med Power 10\/100 Base-T CAT5 Lightning Surge Protector","description":"\u003cp\u003eThe CMSP-CAT5-8 provides protection for up two eight CAT5 data lines. The unit is fully compatible with industry-standard 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE power feed. The unit supports both 802.3af modes A and B supplying power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8. This arrestor is compatible with 10 and 100 Base-T Network appliance with or without PoE capability. This includes Wireless Access Points, Wired Switches, Network Appliances, Outdoor Wireless Routers and CCTV IP Cameras. The rugged aluminum housing can be wall or shelf mounted. Mounting holes are provided on the unit. A ground wire and lug is provided directly on the suppressor providing superior grounding. This protector is also available in a 24-port rack mount version, L-com part number RMSP-CAT5-24.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873943811,"sku":"CMSP-CAT5-8","price":264.07,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CAT5-8_137a8e32-8165-4b7c-920a-626912af897f.jpeg?v=1787931452"},{"product_id":"indoor-2-port-10-100-1000-base-t-shielded-cat6-poe-lightning-protector-rj45","title":"Indoor 2-Port 10\/100\/1000 Base-T Shielded CAT6 PoE Lightning Protector - RJ45","description":"\u003cp\u003eThe CMSP-CAT6-2 Surge Protector provides surge protection for up to two Ethernet lines using 10\/100\/1000 data rates. The use of ultra-low capacitance diodes ensures superior high frequency response and improved return loss for the four data pairs on each line under surge protection. The unit is 802.3af Power over Ethernet, Power-over-Ethernet (PoE) compatible for normal or reverse polarity systems. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable. This protector is also available in a 4-port version, L-com part number CMSP-CAT6-4.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873944259,"sku":"CMSP-CAT6-2","price":208.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-2.jpeg?v=1787932182"},{"product_id":"indoor-4-port-10-100-1000-base-t-shielded-cat6-poe-lightning-protector-rj45","title":"Indoor 4-Port 10\/100\/1000 Base-T Shielded CAT6 PoE Lightning Protector - RJ45","description":"The CMSP-CAT6-4 Surge Protector provides surge protection for up to four Ethernet lines using 10\/100\/1000 data rates. The use of ultra-low capacitance diodes ensures superior high frequency response and improved return loss for the four data pairs on each line under surge protection. The unit is 802.3af Power over Ethernet, Power-over-Ethernet (PoE) compatible for normal or reverse polarity systems. \u003cbr\u003e\u003cbr\u003e The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtects 4 Ethernet lines\u003c\/li\u003e\n\u003cli\u003e802.3af PoE compatible\u003c\/li\u003e\n\u003cli\u003eSupports shielded Ethernet cable\u003c\/li\u003e\n\u003cli\u003eField replaceable modules\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873944451,"sku":"CMSP-CAT6-4","price":183.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-4.jpeg?v=1787933129"},{"product_id":"indoor-2-port-10-100-1000-base-t-gas-tube-cat6-lightning-protector-rj45-jacks","title":"Indoor 2-Port 10\/100\/1000 Base-T Gas Tube CAT6 Lightning Protector - RJ45 Jacks","description":"\u003cp\u003eThe CMSP-CAT6T-2 lightning and surge protector provides superior lightning and surge protection for up to two lines with improved frequency response for indoor 10\/100\/1000 Ethernet networks. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. This design provides protection for both common and differential mode surges. The CMSP-CAT6T-2 utilizes gas discharge tubes on each pair for superior power handling capability. This protector is compatible with 802.3af\/at Power-over-Ethernet (PoE) devices. It supports both PoE mode A and B for power. The CMSP-CAT6T-2 features four shielded RJ-45 jacks for ease of installation. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. This protector is also available in a 4-port version, L-com part number CMSP-CAT6T-4.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873944643,"sku":"CMSP-CAT6T-2","price":240.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-2_1addb30a-9a64-4929-80d7-434fc1e04350.jpeg?v=1787933098"},{"product_id":"indoor-4-port-10-100-1000-base-t-gas-tube-cat6-lightning-protector-rj45-jacks","title":"Indoor 4-Port 10\/100\/1000 Base-T Gas Tube CAT6 Lightning Protector - RJ45 Jacks","description":"The CMSP-CAT6T-4 lightning and surge protector provides superior lightning and surge protection for up to four lines with improved frequency response for indoor 10\/100\/1000 Ethernet networks. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. This design provides protection for both common and differential mode surges. The CMSP-CAT6T-4 utilizes gas discharge tubes on each pair for superior power handling capability.\u003cbr\u003e\u003cbr\u003e This protector is compatible with 802.3af\/at Power-over-Ethernet (PoE) devices. It supports both PoE mode A and B for power. \u003cbr\u003e\u003cbr\u003e The CMSP-CAT6T-4 features eight shielded RJ-45 jacks for ease of installation. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on data sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCAT5, CAT5e and CAT6 compatibility\u003c\/li\u003e\n\u003cli\u003eReliable differential gas tube protection\u003c\/li\u003e\n\u003cli\u003ePoE compatible\u003c\/li\u003e\n\u003cli\u003eProtects up to 4 Ethernet lines\u003c\/li\u003e\n\u003cli\u003eField replaceable modules\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873944899,"sku":"CMSP-CAT6T-4","price":267.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-CATX-4_40fb375e-9deb-49ea-a14e-113864def820.jpeg?v=1787930622"},{"product_id":"indoor-2-line-hi-power-telephone-dsl-t1-lightning-surge-protector-rj11-jacks","title":"Indoor 2-Line Hi-Power Telephone\/DSL\/T1 Lightning Surge Protector - RJ11 Jacks","description":"\u003cp\u003eThe CMSP-DT-2 is a high performance 3-stage lightning protector that provides superior protection for up to two DSL, Telephone and T1 lines from transients and surges. Failsafe Feature The CMSP-DT-2 is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The individual protector modules are field replaceable. The CMSP-DT-2 features four RJ11 jacks for ease of installation. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. This protector is also available in a 4-port version, L-com part number CMSP-DT-4.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873945667,"sku":"CMSP-DT-2","price":249.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-DT-2_260ea455-9e3f-4d1c-9dda-a5f49e24a628.jpeg?v=1787932319"},{"product_id":"indoor-quad-hi-power-telephone-dsl-t1-lightning-surge-protector-rj11-jacks","title":"Indoor Quad Hi-Power Telephone\/DSL\/T1 Lightning Surge Protector - RJ11 Jacks","description":"The CMSP-DT-4 is a high performance 3-stage lightning protector that provides superior protection for up to four DSL, Telephone and T1 lines from transients and surges. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Feature\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The CMSP-DT-4 is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The individual protector modules are field replaceable.\u003cbr\u003e\u003cbr\u003e The CMSP-DT-4 features eight RJ11 jacks for ease of installation. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e This protector is also available in a quad 19 rack mount version, see \u003ca href=\"\/item.aspx?id=31349\"\u003eRMSP-DT-4\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtects 4 telephone\/DSL lines\u003c\/li\u003e\n\u003cli\u003e3-Stage surge protection\u003c\/li\u003e\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\n\u003cli\u003eRJ11 Jacks with provision for shielded cables\u003c\/li\u003e\n\u003cli\u003eField replaceable modules\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873946051,"sku":"CMSP-DT-4","price":348.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-DT-4_c55694b5-72d7-4880-93e3-61baeda1c94e.jpeg?v=1787931672"},{"product_id":"indoor-dual-port-coaxial-video-surge-protector-bnc-connectors","title":"Indoor Dual Port Coaxial Video Surge Protector - BNC Connectors","description":"\u003cp\u003eThe CMSP-VIDEO-2 Dual Port Surge Protectors from L-com provides protection for video equipment from destructive electrical surges due to lightning or noisy electrical equipment. These units are ideal for protecting Surveillance and CCTV Cameras, DVRs, Surveillance PCs and Video Monitors. The units will also protect RF and video equipment connected to 75 Ohm coaxial lines. The CMSP-VIDEO-2 utilizes an avalanche diode in concert with a low capacitance diode array. This minimizes capacitive loading of the line and provides improved frequency response over competitor's models. The CMSP-VIDEO-2 connects the coaxial cable shield to the unit's ground terminal. For model with isolated BNC connectors, see CMSP-VIDEO-2I. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable. This protector is also available in a 4-port version, L-com part number CMSP-VIDEO-4.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873946179,"sku":"CMSP-VIDEO-2","price":95.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-VIDEO-2_635e0616-1541-4b2f-93d3-6ca51d55a647.jpeg?v=1787931741"},{"product_id":"indoor-dual-port-coaxial-video-surge-protector-isolated-bnc-connectors","title":"Indoor Dual Port Coaxial Video Surge Protector - Isolated BNC Connectors","description":"\u003cp\u003eThe CMSP-VIDEO-2I Dual Port Surge Protector from L-com provides protection for video equipment from destructive electrical surges due to lightning or noisy electrical equipment. These units are ideal for protecting Surveillance and CCTV Cameras, DVRs, Surveillance PCs and Video Monitors. The units will also protect RF and video equipment connected to 75 Ohm coaxial lines. The CMSP-VIDEO-2I utilizes an avalanche diode in concert with a low capacitance diode array. This minimizes capacitive loading of the line and provides improved frequency response over competitor's models. The CMSP-VIDEO-2I offers isolated BNC connectors and cable shields for equipment or installations prone to ground loops. The CMSP-VIDEO-2I features a Gas Discharge Tube connected between the coaxial shield and the unit's ground terminal. For grounded version, see CMSP-VIDEO-2. The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable. This protector is also available in a 4-port version, L-com part number CMSP-VIDEO-4I.\u003c\/p\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873946499,"sku":"CMSP-VIDEO-2I","price":70.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-VIDEO-2.jpeg?v=1787932560"},{"product_id":"indoor-quad-coaxial-video-surge-protector-bnc-connectors","title":"Indoor Quad Coaxial Video Surge Protector - BNC Connectors","description":"The CMSP-VIDEO-4 Quad Port Surge Protectors from L-com provides protection for video equipment from destructive electrical surges due to lightning or noisy electrical equipment. These units are ideal for protecting Surveillance and CCTV Cameras, DVRs, Surveillance PCs and Video Monitors. The units will also protect RF and video equipment connected to 75 Ohm coaxial lines.\u003cbr\u003e\u003cbr\u003e The CMSP-VIDEO-4 utilizes an avalanche diode in concert with a low capacitance diode array. This minimizes capacitive loading of the line and provides improved frequency response over competitor's models. The CMSP-VIDEO-4 connects the coaxial cable shield to the unit's ground terminal.\u003cbr\u003e\u003cbr\u003e For model with isolated BNC connectors, see CMSP-VIDEO-4I.\u003cbr\u003e\u003cbr\u003e The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable.\u003cbr\u003e\u003cbr\u003e See data sheet below for additional information and complete specifications.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eFour Individual Modules\u003c\/li\u003e\n\u003cli\u003eGrounded version\u003c\/li\u003e\n\u003cli\u003eDC - 75 MHz Bandwidth\u003c\/li\u003e\n\u003cli\u003eLow Insertion Loss\u003c\/li\u003e\n\u003cli\u003eField Repairable\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873947395,"sku":"CMSP-VIDEO-4","price":202.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-VIDEO-4_febd968d-1c15-468a-ab9b-67b6d26e10b3.jpeg?v=1787930645"},{"product_id":"indoor-quad-coaxial-video-surge-protector-isolated-bnc-connectors","title":"Indoor Quad Coaxial Video Surge Protector - Isolated BNC Connectors","description":"The CMSP-VIDEO-4I Quad Port Surge Protector from L-com provides protection for video equipment from destructive electrical surges due to lightning or noisy electrical equipment. These units are ideal for protecting Surveillance and CCTV Cameras, DVRs, Surveillance PCs and Video Monitors. The units will also protect RF and video equipment connected to 75 Ohm coaxial lines.\u003cbr\u003e\u003cbr\u003e The CMSP-VIDEO-4I utilizes an avalanche diode in concert with a low capacitance diode array. This minimizes capacitive loading of the line and provides improved frequency response over competitor's models. The CMSP-VIDEO-4I offers isolated BNC connectors and cable shields for equipment or installations prone to ground loops. The CMSP-VIDEO-4I features a Gas Discharge Tube connected between the coaxial shield and the unit's ground terminal.\u003cbr\u003e\u003cbr\u003e For grounded version, see CMSP-VIDEO-4.\u003cbr\u003e\u003cbr\u003e The rugged aluminum chassis can be wall or shelf mounted. Mounting holes are provided on the unit. The individual protector modules are field replaceable.\u003cbr\u003e\u003cbr\u003e See data sheet below for additional information and complete specifications.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eFour Individual Modules\u003c\/li\u003e\n\u003cli\u003eIsolated BNC connectors\u003c\/li\u003e\n\u003cli\u003eDC - 75 MHz Bandwidth\u003c\/li\u003e\n\u003cli\u003eLow Insertion Loss\u003c\/li\u003e\n\u003cli\u003eField Repairable\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873947843,"sku":"CMSP-VIDEO-4I","price":181.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_CMSP-VIDEO-4.jpeg?v=1787932757"},{"product_id":"indoor-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLN-CAT5-2 provides lightning and surge protection for CAT5 data applications. The unit is compatible with industry-standard IEEE 802.3af Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed.\u003cbr\u003e\u003cbr\u003e High speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 15 volts on pins, 1, 2, 3 and 6 and +\/- 58 volts on pins 4, 5, 7 and 8. The unit is compatible with both normal and inverted polarity voltage PoE equipment. Most PoE capable equipment is not protected from surges on it's CAT5 cable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5-2 features shielded RJ45 jacks. This along with the HGLN-CAT5-2's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT5-2 can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProtects 10\/100 Base-T Ethernet networks\u003c\/li\u003e\r\n\u003cli\u003ePower-over-Ethernet (PoE) compatible\u003c\/li\u003e\r\n\u003cli\u003eSupports reverse polarity PoE pinouts\u003c\/li\u003e\r\n\u003cli\u003eCompatible with Cisco Aironet  1100\/1200 AP and DC Injectors\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade Cast aluminum construction with shielded RJ-45 jacks and integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873950211,"sku":"HGLN-CAT5-2","price":86.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5-2_8832dd29-2c44-4a63-b48c-5f6496502b1e.jpeg?v=1787931515"},{"product_id":"indoor-10-100-base-t-shielded-cat5e-lightning-surge-protector","title":"Indoor 10\/100 Base-T Shielded CAT5e Lightning Surge Protector","description":"The HyperLink HGLN-CAT5EJW Lightning Protector provides superior lightning and surge protection with improved frequency response for indoor 10\/100 Base-T Ethernet networks. In addition, the unit is compatible with 802.3af Power-over-Ethernet (PoE) devices. Integral to the design is protection for the four Ethernet data pairs and the PoE DC power feed. \u003cbr\u003e\u003cbr\u003e This unit supports normal and reverse polarity PoE used in some Cisco Access Points. The HGLN-CAT5EJW is compatible with Wireless Access Points, Access Servers and Routers, with or without Power-over-Ethernet (PoE) functionality. \u003cbr\u003e\u003cbr\u003e This protector is also available for 15 Volt and 24 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=33505%22\"\u003eHGLN-CAT5EJW24\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e The unit features a low capacitance diode array that can withstand large surge currents. The design utilizes a Thyristor diode which switches to a low impedance state once triggered. This offers superior power handling capability compared to TVS or Zener diode based designs. The limits are +\/- 58 volts on the four cable pairs. \u003cbr\u003e\u003cbr\u003e The HGLN-CAT5EJW features shielded RJ45 jacks. This along with the unit's metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the lightning protector housing, providing superior grounding. A second ground and terminal is provided for strapping multiple units together.\u003cbr\u003e\u003cbr\u003e This protector is also available in the following versions:\u003cbr\u003e For outdoor use with RJ45 Jacks, \u003ca href=\"\/item.aspx?ID=22336\"\u003e\u003cb\u003eAL-CAT5EJW\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e For outdoor use with Punch Down Block, \u003ca href=\"\/item.aspx?ID=22337\"\u003e\u003cb\u003eAL-CAT5EPW\u003c\/b\u003e\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e This model is equivalent to the Motorola\/Transtector ALPU-ORT protector.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCAT5 and CAT5e compatibility\u003c\/li\u003e\r\n\u003cli\u003ePower-Over-Ethernet (PoE) compatible\u003c\/li\u003e\r\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ-45 jacks and metal housing for EMI noise suppression\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873950403,"sku":"HGLN-CAT5EJW","price":100.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5EJW_a2055ba7-f8b7-4764-afd0-8ba16fa776dc.jpeg?v=1787932199"},{"product_id":"indoor-10-100-base-t-shielded-24v-poe-cat5e-lightning-surge-protector","title":"Indoor 10\/100 Base-T Shielded 24V PoE CAT5e Lightning Surge Protector","description":"The HGLN-CAT5EJW24 Lightning Protector provides superior lightning and surge protection for indoor 10\/100 Base-T Ethernet networks. Integral to the design is protection for the four Ethernet data pairs and the PoE DC power feed. \u003cbr\u003e\u003cbr\u003e *This protector is also compatible with 10\/100\/1000 Base-T Ethernet networks, but it is recommended to be used on shorter length CAT6 cable runs for best performance.\u003cbr\u003e\u003cbr\u003e The unit features a low capacitance diode array that can withstand large surge currents. The design utilizes a Thyristor diode which switches to a low impedance state once triggered. This offers superior power handling capability compared to TVS or Zener diode based designs. The limits are +\/- 36 volts on the four cable pairs.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e15 Volt and 24 Volt PoE Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Designed to be compatible with 15V and 24V PoE devices, the HGLN-CAT5EJW24 is ideal for use with select devices from Motorola, Ubiquiti, Engenius and Planet as well as other PoE equipment requiring 15V or 24V.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eNote: This protector is not intended for use with standard 48V PoE devices.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This protector is also available for standard 48 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=22335%22\"\u003eHGLN-CAT5EJW\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5EJW24 features shielded RJ45 jacks. This along with the unit's metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the lightning protector housing, providing superior grounding. A second ground and terminal is provided for strapping multiple units together.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCAT5, CAT5e and CAT6* compatibility\u003c\/li\u003e\r\n\u003cli\u003eCompatible with 15V and 24V Power-Over-Ethernet (PoE) devices\u003c\/li\u003e\r\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ-45 jacks and metal housing for EMI noise suppression\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873950851,"sku":"HGLN-CAT5EJW24","price":113.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5EJW.jpeg?v=1787931218"},{"product_id":"indoor-high-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor High Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLN-CAT5-HP 3-stage lightning protector provides superior lightning and surge protection for indoor and outdoor 10\/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. This protector is compatible with any variation of PoE including 802.3af and proprietary systems from Airspan, Alvarion and Tranzeo. Also it will work with systems without PoE.\u003cbr\u003e\u003cbr\u003e In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eCisco Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5-HP features shielded RJ45 jacks. This along with the HGLN-CAT5-HP's metal housing helps reduce the effects of EMI interference.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Architecture\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The Advantage of the HGLN-CAT5-HP three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.\u003cbr\u003e\u003cbr\u003e Hyperlink's CAT5 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers that support Power-over-Ethernet (PoE). A ground lug and terminal is provided directly on the lightning protector housing, providing superior grounding. A second ground and terminal is provided for strapping multiple units together.\u003cbr\u003e\u003cbr\u003e For maximum protection from lightning on long cable runs, two HGLN-CAT5-HP's can be used -one at each end of the cable. Most PoE capable equipment is not protected from surges on it's CAT5 cable.\u003cbr\u003e\u003cbr\u003e This protector is also available in a weather resistant model, \u003ca href=\"\/item.aspx?id=22175%22\"\u003eAL-CAT5HPJW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below\u0026gt;\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection \u0026amp; Failsafe architecture\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ-45 jacks and metal housing for EMI noise suppression\u003c\/li\u003e\r\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\r\n\u003cli\u003eCisco  Reverse Polarity PoE compatible\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873951619,"sku":"HGLN-CAT5-HP","price":147.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5-HP_9eaa2d73-1285-41c7-b7b3-c7856e76263e.jpeg?v=1787933477"},{"product_id":"indoor-med-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor Med Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HyperLink HGLN-CAT5J is a compact indoor lightning surge arrestor which provides protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e This protector is also available for 15 Volt and 24 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=33510%22\"\u003eHGLN-CAT5J24\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The design utilizes Thyristor diode technology which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5J features shielded RJ45 jacks. This along with the HGLN-CAT5J's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT5J can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e This protector is also available in a weather resistant model, \u003ca href=\"\/item.aspx?id=20944\"\u003eAL-CAT5JW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e(2) Shielded RJ-45 jacks\u003c\/li\u003e\r\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet compatible and Cisco  Reverse Polarity PoE compatible\u003c\/li\u003e\r\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\r\n\u003cli\u003eSupports use of shielded CAT5 cable\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873951811,"sku":"HGLN-CAT5J","price":68.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5J_26c89c53-2e5f-48d0-a485-a7596231489b.jpeg?v=1787931593"},{"product_id":"indoor-med-power-10-100-base-t-shielded-24v-poe-cat5-lightning-surge-protector","title":"Indoor Med Power 10\/100 Base-T Shielded 24V PoE CAT5 Lightning Surge Protector","description":"The HGLN-CAT5J24 is a compact indoor lightning surge arrestor which provides protection for CAT5 data applications. The unit is fully compatible with 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both PoE modes A and B for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 36 volts on the four cable pairs. The unit is compatible with both normal and inverted polarity voltage PoE equipment. The design utilizes Thyristor diode technology which has superior power handling capability compared to TVS or Zener diode based designs. \u003cbr\u003e\u003cbr\u003e \u003cb\u003e15 Volt and 24 Volt PoE Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Designed to be compatible with 15V and 24V PoE devices, the HGLN-CAT5J24 is ideal for use with select devices from Motorola, Ubiquiti, Engenius and Planet as well as other PoE equipment requiring 15V or 24V.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eNote: This protector is not intended for use with standard 48V PoE devices.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This protector is also available for standard 48 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=23168%22\"\u003eHGLN-CAT5J\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e The HGLN-CAT5J24 features shielded RJ45 jacks. This along with the HGLN-CAT5J24's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT5J24's can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eCompatible with 15V and 24V Power-Over-Ethernet (PoE) devices\u003c\/li\u003e\r\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\r\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ-45 jacks, support for shielded CAT5 cable\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873952195,"sku":"HGLN-CAT5J24","price":91.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT5J.jpeg?v=1787932159"},{"product_id":"indoor-10-100-1000-base-t-shielded-cat6-lightning-protector-rj45-jacks","title":"Indoor 10\/100\/1000 Base-T Shielded CAT6 Lightning Protector - RJ45 Jacks","description":"Hyperlink's HGLN-CAT6 Lightning Protector with improved frequency response is compatible with 10, 100 and 1000 Base -T and Gigabit Ethernet networks. This unit individually protects the 8 wires in standard CAT5\/CAT6\" cable. High-speed devices clamp any voltage, positive or negative on the wires. The design uses transmission line layout techniques to maintain a balanced 100 ohm impedance in the signal path of the four pairs for minimal insertion loss and superior high frequency response.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-CAT6 features shielded RJ45 jacks. This along with the HGLN-CAT6's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT6 can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e The cast aluminum housing includes integral mounting feet for ease of installation.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e\u003cspan color=\"#FF0000\" style=\"color: #ff0000;\"\u003eNOTE: This product is NOT PoE compatible.\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e For applications requiring higher power rating and 802.3af PoE compatiblity, see HGLN-CAT6J\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCAT6, CAT5e and CAT5 compatible\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ-45 jacks and metal housing for EMI noise suppression\u003c\/li\u003e\r\n\u003cli\u003e10\/100\/1000 Base-T Gigabit Ethernet protection\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction, integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003cb\u003e\u003cspan color='#FF0000\"'\u003eNOTE: This product is NOT PoE compatible\u003c\/span\u003e\u003c\/b\u003e\"\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873952515,"sku":"HGLN-CAT6","price":125.74,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT6_847f3b45-17bf-49ed-8ac8-956ea7f30f17.jpeg?v=1787931660"},{"product_id":"indoor-10-100-1000-base-t-shielded-cat6-hi-power-lightning-protector-rj45-jacks","title":"Indoor 10\/100\/1000 Base-T Shielded CAT6 Hi-Power Lightning Protector - RJ45 Jacks","description":"The HyperLink HGLN-CAT6-HP Lightning Protector provides superior lightning and surge protection for indoor 10\/100\/1000 Base-T Ethernet networks. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. The design provides protection for both common and differential mode surges. \u003cbr\u003e\u003cbr\u003e The HGLN-CAT6-HP has been designed to meet the GR-1089 Intra-Building surge protection requirements for 10\/100\/1000 Base-T Ethernet lines. In addition, the unit is compatible with 802.3af Power-over-Ethernet (PoE) devices. This device supports PoE mode A and B for power. The HGLN-CAT6-HP isolates the cable shield from the metal enclosure and the safety ground. This minimizes the chance of a ground loop being introduced. \u003cbr\u003e\u003cbr\u003e The HGLN-CAT6-HP features shielded RJ45 jacks with isolation from the metal housing and safety ground. This minimizes the chance for ground loops when using shielded cable. The unit's metal housing helps shield the effects of EMI interference and reduce signal radiation. A ground lug and terminal is provided directly on the lightning protector housing, providing superior grounding. A second ground and terminal is provided for strapping multiple units together. For maximum protection from lightning on long cable runs, two HGLN-CAT6-HP's can be used - one at each end of the cable.\u003cbr\u003e\u003cbr\u003e This protector is also available in the following versions: For outdoor use with RJ45 Jacks, \u003ca href=\"\/item.aspx?ID=22342%22\"\u003eAL-CAT6HPJW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eCAT6, CAT5e and CAT5 compatibility\u003c\/li\u003e\r\n\u003cli\u003eGR-1089 Intra-Building rated\u003c\/li\u003e\r\n\u003cli\u003eCable shield isolated from safety ground\u003c\/li\u003e\r\n\u003cli\u003ePower-Over-Ethernet (PoE) compatible\u003c\/li\u003e\r\n\u003cli\u003eAll lines protected\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873953219,"sku":"HGLN-CAT6-HP","price":150.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT6-HP_c1ae4fd3-588f-4a65-82ab-2049c710e397.jpeg?v=1787930496"},{"product_id":"indoor-10-100-1000-base-t-shielded-cat6-poe-compatible-lightning-protector-rj45","title":"Indoor 10\/100\/1000 Base-T Shielded CAT6 PoE Compatible Lightning Protector - RJ45","description":"The HGLN-CAT6J Shielded Indoor Lightning Protector provides superior lightning and surge protection with improved frequency response for indoor 10\/100\/1000 Ethernet networks. The use of ultra-low capacitance semiconductor protection arrays provides superior high frequency response and improved return loss for the four data pairs. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. The design provides protection for both common and differential mode surges. In addition, the unit is compatible with 802.3af Power-over-Ethernet (PoE) devices. This device supports PoE mode A and B for power. The unit supports normal and reverse polarity PoE used in some Cisco Access Points. The HGLN-CAT6J is compatible with wireless Access Points, Bridges, Client Adapters and Network Appliances with or without Power-over-Ethernet (PoE) functionality.\u003cbr\u003e\u003cbr\u003e    \u003cb\u003eEMI Noise Suppression\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e    The HGLN-CAT6J features shielded RJ45 jacks. This along with the HGLN-CAT6J's metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLN-CAT6J can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e    The cast aluminum housing includes integral mounting feet for ease of installation  \u003cbr\u003e\u003cbr\u003e    This protector is also available for outdoor applications, see \u003ca href=\"\/item.aspx?id=22172%22\"\u003eAL-CAT6JW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e    Not sure which level of protection is required for your application? \u003cbr\u003e  \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\r\n\u003cli\u003eCAT5, CAT5e and CAT6 compatibility\u003c\/li\u003e\r\n\u003cli\u003e802.3af Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\r\n\u003cli\u003eDie cast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ45 jacks\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873954051,"sku":"HGLN-CAT6J","price":132.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CAT6J_0c5110c5-e8ac-4560-82b3-882772004ba1.jpeg?v=1787930878"},{"product_id":"indoor-1-channel-4-20-ma-current-loop-protector-12v","title":"Indoor 1-Channel 4-20 mA Current Loop Protector - 12V","description":"The HGLN-CL1-12 is a high performance 3-stage indoor protector that provide superior protection of differential or common mode lines from transients and surges. These units will protect a single 4-20 mA circuit. \u003cbr\u003e\u003cbr\u003e    The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e    For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\r\n\u003cli\u003eSingle channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003eDie cast aluminum construction with screw terminal blocks\u003c\/li\u003e\r\n\u003cli\u003eAvailable in 15V and 24V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873954435,"sku":"HGLN-CL1-12","price":192.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CL1-XX_af16091c-e037-483a-8c8c-ec2228ad0718.jpeg?v=1787932148"},{"product_id":"indoor-1-channel-4-20-ma-current-loop-protector-15v","title":"Indoor 1-Channel 4-20 mA Current Loop Protector - 15V","description":"The HGLN-CL1-15 is a high performance 3-stage indoor protector that provide superior protection of differential or common mode lines from transients and surges. These units will protect a single 4-20 mA circuit. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSingle channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003eDie cast aluminum construction with screw terminal blocks\u003c\/li\u003e\r\n\u003cli\u003eAvailable in 12V and 24V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873955651,"sku":"HGLN-CL1-15","price":116.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CL1-XX.jpeg?v=1787930507"},{"product_id":"indoor-1-channel-4-20-ma-current-loop-protector-24v","title":"Indoor 1-Channel 4-20 mA Current Loop Protector - 24V","description":"The HGLN-CL1-24 is a high performance 3-stage indoor protector that provide superior protection of differential or common mode lines from transients and surges. These units will protect a single 4-20 mA circuit. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eSingle channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003eDie cast aluminum construction with screw terminal blocks\u003c\/li\u003e\r\n\u003cli\u003eAvailable in 12V and 15V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873955843,"sku":"HGLN-CL1-24","price":195.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CL1-XX_a7979767-1976-4022-a989-b6729b4a4670.jpeg?v=1787930770"},{"product_id":"indoor-2-channel-4-20-ma-current-loop-protector-12v","title":"Indoor 2-Channel 4-20 mA Current Loop Protector - 12V","description":"The HGLN-CL2-12 is a high performance 3-stage indoor protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect two 4-20 mA circuits. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDual Channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage Protection\u003c\/li\u003e\r\n\u003cli\u003eCast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eScrew Terminal Blocks\u003c\/li\u003e\r\n\u003cli\u003eAvailable in 15V and 24V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873956035,"sku":"HGLN-CL2-12","price":170.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CL2-XX_0e9b48d8-f7dc-4b69-9989-5e28c974a166.jpeg?v=1787930577"},{"product_id":"indoor-2-channel-4-20-ma-current-loop-protector-15v","title":"Indoor 2-Channel 4-20 mA Current Loop Protector - 15V","description":"The HGLN-CL2-15 is a high performance 3-stage indoor protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect two 4-20 mA circuits. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDual Channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage Protection\u003c\/li\u003e\r\n\u003cli\u003eCast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eScrew Terminal Blocks\u003c\/li\u003e\r\n\u003cli\u003eAvailable in 12V and 24V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873956099,"sku":"HGLN-CL2-15","price":63.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CL2-XX_f5153552-5d39-4d3a-9bde-d0563caef064.jpeg?v=1787931395"},{"product_id":"indoor-2-channel-4-20-ma-current-loop-protector-24v","title":"Indoor 2-Channel 4-20 mA Current Loop Protector - 24V","description":"The HGLN-CL2-24 is a high performance 3-stage indoor protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect two 4-20 mA circuits. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDual Channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage Protection\u003c\/li\u003e\r\n\u003cli\u003eCast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eScrew Terminal Blocks\u003c\/li\u003e\r\n\u003cli\u003eAvailable in 12V and 15V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873956227,"sku":"HGLN-CL2-24","price":159.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-CL2-XX.jpeg?v=1787931610"},{"product_id":"indoor-3-stage-lightning-surge-protector-for-rs-485-lines","title":"Indoor 3-Stage Lightning Surge Protector for RS-485 Lines","description":"The HGLN-D1-05 high performance 3-stage lightning protector provides superior protection of differential or balanced digital or analog lines from transients and surges. The unit will also protect two single ended data, analog or control lines. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Feature\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-D1-05 is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable \u003cbr\u003e\u003cbr\u003e For more complete surge protection of data lines, the use of two units is recommended, one at each end of the line.\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3-Stage surge protection\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003eFailsafe mode of operation\u003c\/li\u003e\r\n\u003cli\u003eDie Cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873957251,"sku":"HGLN-D1-05","price":156.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-D1-05_47bc4475-cdbb-4409-9d95-2e1f8d1f6468.jpeg?v=1787930851"},{"product_id":"indoor-hi-pwr-1-line-phone-dsl-t1-lightning-surge-protector-screw-terminals","title":"Indoor Hi-Pwr 1-Line Phone\/DSL\/T1 Lightning Surge Protector - Screw Terminals","description":"The HGLN-D1-DT is a high performance indoor 3-stage lightning protector that provides superior protection for DSL, Telephone and T1 lines from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Feature\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-D1-DT is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable\u003cbr\u003e\u003cbr\u003e For more complete surge protection of data lines, the use of two units is recommended, one at each end of the line. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3-Stage surge protection\u003c\/li\u003e\r\n\u003cli\u003eScrew Terminals\u003c\/li\u003e\r\n\u003cli\u003eProvision for shielded cables\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873957379,"sku":"HGLN-D1-DT","price":168.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-D1-DT_cf84dd3a-989b-4ff0-b9a6-8ff8fdeafe0e.jpeg?v=1787932459"},{"product_id":"indoor-3-stage-lightning-surge-protector-for-rs-422-rs-485-lines","title":"Indoor 3-Stage Lightning Surge Protector for RS-422 \u0026 RS-485 Lines","description":"The HGLN-D2 series of high performance 3-stage lightning protector provide superior protection of differential or balanced digital or analog lines from transients and surges. The units will protect two pairs of differential data or analog signal\/control lines.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e For more complete surge protection of data lines, the use of two units is recommended, one at each end of the line. \u003cbr\u003e\u003cbr\u003e For outdoor applications, this protector is also available in a weather resistant enclosure. See \u003ca href=\"\/item.aspx?ID=22178%22\"\u003e\u003cb\u003eAL-D2W-05\u003c\/b\u003e\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eApplication Note:\u003c\/b\u003e\u003cbr\u003e Not for use with T1 lines with Ring or DC Power.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade\u003c\/li\u003e\r\n\u003cli\u003e3-Stage surge protection\u003c\/li\u003e\r\n\u003cli\u003eCast aluminum construction, integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eProtection of digital or analog signal or control lines \u0026amp; provision for shielded cables\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873957571,"sku":"HGLN-D2-05","price":154.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-D2-05_e0795350-3433-4afe-894d-e6d9a1ba6b3f.jpeg?v=1787932409"},{"product_id":"indoor-3-stage-lightning-surge-protector-for-rs-232-sensors-control-lines","title":"Indoor 3-Stage Lightning Surge Protector for RS-232 Sensors \u0026 Control Lines","description":"The HGLN-D2 series of high performance 3-stage lightning protector provide superior protection of differential or balanced digital or analog lines from transients and surges. The units will protect two pairs of differential data or analog signal\/control lines.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e For more complete surge protection of data lines, the use of two units is recommended, one at each end of the line.\u003cbr\u003e\u003cbr\u003e For outdoor applications, this protector is also available in a weather resistant enclosure. See \u003ca href=\"\/item.aspx?ID=22179%22\"\u003e\u003cb\u003eAL-D2W-12\u003c\/b\u003e\u003c\/a\u003e. For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade\u003c\/li\u003e\r\n\u003cli\u003e3-Stage surge protection\u003c\/li\u003e\r\n\u003cli\u003eCast aluminum construction, integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eProtection of digital or analog signal or control lines \u0026amp; provision for shielded cables\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873957891,"sku":"HGLN-D2-12","price":168.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-D2-12_5508d27f-693c-4455-a352-00ba5bcb6569.jpeg?v=1787932335"},{"product_id":"indoor-high-power-telephone-dsl-lightning-surge-protector-screw-terminals","title":"Indoor High Power Telephone\/DSL Lightning Surge Protector - Screw Terminals","description":"The HGLN-D2 series of high performance 3-stage lightning protector provide superior protection of differential or balanced digital or analog lines from transients and surges. The units will protect two pairs of differential data or analog signal\/control lines.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. \u003cbr\u003e\u003cbr\u003e The second stage series resistance limits the power dissipation of the third stages faster diode clamp array. This allows time for the slower but higher power gas tubes to turn on. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array low capacitance assures that the high speed signals will not be degraded by the suppressor. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e For more complete surge protection of data lines, the use of two units is recommended, one at each end of the line. \u003cbr\u003e\u003cbr\u003e For outdoor applications, this protector is also available in a weather resistant enclosure. See \u003ca href=\"\/item.aspx?ID=23101%22\"\u003e\u003cb\u003eAL-DSLSW\u003c\/b\u003e\u003c\/a\u003e.\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with integral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e3-Stage fail safe surge protection\u003c\/li\u003e\r\n\u003cli\u003eScrew terminals\u003c\/li\u003e\r\n\u003cli\u003eProtection of digital or analog signal or control lines \u0026amp; provision for shielded cables\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873958595,"sku":"HGLN-D2-DT","price":109.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-D2-DT_218f11a5-08e1-4b68-9db2-625623444457.jpeg?v=1787932525"},{"product_id":"indoor-hi-power-dual-line-telephone-dsl-t1-lightning-surge-protector-rj11-jacks","title":"Indoor Hi-Power Dual Line Telephone\/DSL\/T1 Lightning Surge Protector - RJ11 Jacks","description":"The HGLN-D2T is a high performance lightning and surge protector that provides superior protection for two DSL, Telephone and T1 lines from transients and surges. \u003cbr\u003e\u003cbr\u003e The design of the HGLN-D2T incorporates the use of three terminal differential gas discharge tubes which provide superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The HGLN-D2T utilizes the gas discharge tubes on each pair to provide superior power handling capability. \u003cbr\u003e\u003cbr\u003e The HGLN-D2T features two RJ11 jacks for ease of installation. Additional features include a ground lug directly on the lightning protector housing providing superior grounding. Integral mounting feet are provided on the cast aluminum house.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on data sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eProtects 2 telephone\/DSL lines\u003c\/li\u003e\r\n\u003cli\u003eReliable differential gas tube protection\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003eRJ11 Jacks with provision for shielded cables\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873958787,"sku":"HGLN-D2T","price":145.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-D2T_b5e786ac-07df-4c7b-873a-a9db5aa71710.jpeg?v=1787930427"},{"product_id":"indoor-dc-power-lightning-surge-protector-12-vdc","title":"Indoor DC Power Lightning Surge Protector - 12 VDC","description":"The HGLN-DC-12 series lightning protector provides superior protection of 12 VDC power feeds from transients and surges. It is designed to protect a single line from differential and common mode surge events.\u003cbr\u003e\u003cbr\u003e Comprised of a 3 terminal gas discharge tube and a TVS diode, the gas tube provides both differential and common mode protection. The fast TVS diode provides differential mode protection for equipment.\u003cbr\u003e\u003cbr\u003e The HGLN-DC-12 includes a ground lug provided directly on the lightning protector housing providing superior grounding. For more complete surge protection of data lines, the use of two units is recommended, one at each end of the line. \u003cbr\u003e\u003cbr\u003e The cast aluminum housing includes integral mounting feet for ease of installation.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade, cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eScrew terminal block\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003eCompact size\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873958979,"sku":"HGLN-DC-12","price":145.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_HGLN-DC-12_74a3d8dd-1744-465b-b4b1-596d37c167fe.jpeg?v=1787933215"},{"product_id":"indoor-din-mount-high-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor DIN Mount High Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLND-CAT5-HP DIN mountable 3-stage lightning protector provides superior lightning and surge protection for indoor and outdoor 10\/100 Base-T Ethernet networks. Also compatible with Power-over-Ethernet (PoE) devices, this unit provides protection to both Ethernet data pairs as well as the PoE DC power feed. This protector is compatible with any variation of PoE including 802.3af and proprietary systems from Airspan, Alvarion and Tranzeo. Also it will work with systems without PoE.\u003cbr\u003e\u003cbr\u003e In the data path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a pair of filter inductors and the final stage is a pair of bi-directional clamping diodes.\u003cbr\u003e\u003cbr\u003e The HGLND-CAT5-HP features shielded RJ45 jacks. This along with the metal housing helps reduce the effects of EMI interference. A ground lug and terminal is provided directly on the lightning protector housing, providing superior grounding. A second ground and terminal is provided for strapping multiple units together.\u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\r\n\u003cli\u003eThree stage protection \u0026amp; failsafe architecture\u003c\/li\u003e\r\n\u003cli\u003eSupports PoE mode B for power\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with shielded RJ-45 jacks\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873959299,"sku":"HGLND-CAT5-HP","price":204.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CAT5-HP_042e2c47-5aca-4c34-bc80-2801c21f2eea.jpeg?v=1787932068"},{"product_id":"indoor-din-mount-med-power-10-100-base-t-shielded-cat5-lightning-surge-protector","title":"Indoor DIN Mount Med Power 10\/100 Base-T Shielded CAT5 Lightning Surge Protector","description":"The HGLND-CAT5J is a compact indoor DIN rail mountable lightning surge arrestor which provides protection for CAT5 data applications. The unit is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e The HGLND-CAT5J features shielded RJ45 jacks. This along with the metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. The unit also supports the use of shielded CAT5 cable.\u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003e10\/100 Base-T CAT5 protection\u003c\/li\u003e\r\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet compatible\u003c\/li\u003e\r\n\u003cli\u003eProtects 4 data pairs\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with shielded RJ-45 jacks\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873960451,"sku":"HGLND-CAT5J","price":132.92,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CAT5J_6fb1e35e-1045-44b4-87cc-a167f8fad66f.jpeg?v=1787931615"},{"product_id":"indoor-din-mount-10-100-1000-base-t-shielded-cat6-poe-compatible-lightning-protector-rj45","title":"Indoor DIN Mount 10\/100\/1000 Base-T Shielded CAT6 PoE Compatible Lightning Protector - RJ45","description":"The HGLND-CAT6J shielded DIN mountable indoor lightning protector provides superior lightning and surge protection with improved frequency response for indoor 10\/100\/1000 Ethernet networks. The use of ultra-low capacitance semiconductor protection arrays provides superior high frequency response and improved return loss for the four data pairs. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. The design provides protection for both common and differential mode surges. \u003cbr\u003e\u003cbr\u003e    The HGLND-CAT6J is compatible with 802.3af Power-over-Ethernet (PoE) devices. It supports PoE mode A and B for power as well as supporting normal and reverse polarity PoE used in some Cisco Access Points. The HGLND-CAT6J is compatible with wireless Access Points, Bridges, Client Adapters and Network Appliances with or without Power-over-Ethernet (PoE) functionality.\u003cbr\u003e\u003cbr\u003e    The HGLND-CAT6J features shielded RJ45 jacks. This along with the metal housing helps reduce the effects of EMI interference. Additional features include a ground lug and terminal is provided directly on the lightning protector housing providing superior grounding. For maximum protection from lightning on long cable runs, two HGLND-CAT6J protectors can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e    This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.\u003cbr\u003e\u003cbr\u003e    For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003eCAT5, CAT5e and CAT6 compatibility\u003c\/li\u003e\r\n\u003cli\u003e802.3af Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction with shielded RJ-45 jacks\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873961347,"sku":"HGLND-CAT6J","price":127.53,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CAT6J_2b9edbfc-2650-4bd5-ab39-100cef675249.jpeg?v=1787933262"},{"product_id":"indoor-din-mount-1-channel-4-20-ma-current-loop-protector-15v","title":"Indoor DIN Mount 1-Channel 4-20 mA Current Loop Protector - 15V","description":"The HGLND-CL1-15 is a high performance 3-stage DIN mountable indoor protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect a single 4-20 mA circuit. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e The HGLND-CL1-15 is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable. \u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003eDie cast aluminum construction with screw terminal blocks\u003c\/li\u003e\r\n\u003cli\u003eAlso available in 12V and 24V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873962755,"sku":"HGLND-CL1-15","price":86.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CL1.jpeg?v=1787932925"},{"product_id":"indoor-din-mount-2-channel-4-20-ma-current-loop-protector-12v","title":"Indoor DIN Mount 2-Channel 4-20 mA Current Loop Protector - 12V","description":"The HGLND-CL2-12 is a high performance 3-stage indoor DIN mountable protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect two 4-20 mA circuits. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit. Studs are provided on housing for proper grounding of protector.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003eDual Channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\r\n\u003cli\u003eCast aluminum construction with screw terminal blocks\u003c\/li\u003e\r\n\u003cli\u003eAlso available in 15V and 24V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873963139,"sku":"HGLND-CL2-12","price":111.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CL2_409390cb-f3fb-48cb-b5c1-207621965705.jpeg?v=1787932475"},{"product_id":"indoor-din-mount-2-channel-4-20-ma-current-loop-protector-24v","title":"Indoor DIN Mount 2-Channel 4-20 mA Current Loop Protector - 24V","description":"The HGLND-CL2-24 is a high performance 3-stage indoor DIN mountable protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect two 4-20 mA circuits. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit. Studs are provided on housing for proper grounding of protector.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003eDual Channel\u003c\/li\u003e\r\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\r\n\u003cli\u003eCast aluminum construction with screw terminal blocks\u003c\/li\u003e\r\n\u003cli\u003eAlso available in 12V and 15V models\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873963971,"sku":"HGLND-CL2-24","price":194.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLND-CL2_93f4851e-a7b7-4121-9b2b-55f30ee8e105.jpeg?v=1787931810"},{"product_id":"indoor-din-mount-hi-pwr-1-line-phone-dsl-t1-lightning-surge-protector-screw-term","title":"Indoor DIN Mount Hi-Pwr 1-Line Phone\/DSL\/T1 Lightning Surge Protector - Screw Term","description":"The HGLND-D1-DT high performance 3-stage lightning protector provides superior protection for DSL, Telephone and T1 lines from transients and surges. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e The HGLND-D1-DT is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable. \u003cbr\u003e\u003cbr\u003e This unit can be mounted to a DIN 3 rail using the DIN mounting clip located on the rear of the unit.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on data sheet below\u0026gt;\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eDIN 3 rail mountable\u003c\/li\u003e\r\n\u003cli\u003e3-Stage surge protection\u003c\/li\u003e\r\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\r\n\u003cli\u003eFailsafe mode of operation\u003c\/li\u003e\r\n\u003cli\u003eDie Cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873964547,"sku":"HGLND-D1-DT","price":199.39,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/hglnd-d1-dt.jpg?v=1787932633"},{"product_id":"indoor-high-power-telephone-dsl-lightning-surge-protector-rj11-jacks","title":"Indoor High Power Telephone \/ DSL Lightning Surge Protector - RJ11 Jacks","description":"The HGLN-DSL Phone\/DSL 3-stage Lightning Protector provides superior lightning and surge protection for Telephone and DSL lines. The unit is fully compatible with dedicated and shared DSL and phone lines. Shared phone lines carry the ring voltage for standard telephones. The unit protects against both differential and common mode transients.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior protection against surges. The second stage series resistance limits the power dissipation of the faster diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to turn on. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e Hyperlink's HGLN-DSL Lightning Protector has two RJ11 jacks for ease of installation. If terminal strips are needed, use the HGLN-D2 series of surge protectors. A pair of ground lugs and terminals is provided directly on the lightning protector housing, providing superior grounding.\u003cbr\u003e\u003cbr\u003e For outdoor applications, this protector is also available in a weather resistant enclosure. See \u003ca href=\"\/item.aspx?id=23100%22\"\u003eAL-DSLJW\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003e3-Stage fail safe surge protection\u003c\/li\u003e\r\n\u003cli\u003eRJ11 Jacks\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873964675,"sku":"HGLN-DSL","price":116.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-DSL_c2cd8a27-1641-4a43-b7c5-f2c190a44cda.jpeg?v=1787931598"},{"product_id":"indoor-hi-power-single-line-telephone-dsl-t1-lightning-surge-protector-rj11-jacks","title":"Indoor Hi-Power Single Line Telephone\/DSL\/T1 Lightning Surge Protector - RJ11 Jacks","description":"The HGLN-DT is a high performance 3-stage lightning protector that provides superior protection for DSL, Telephone and T1 lines from transients and surges. \u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Feature\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The HGLN-D1-DT is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable\u003cbr\u003e\u003cbr\u003e For more complete surge protection of data lines, the use of two units is recommended, one at each end of the line.\u003cbr\u003e\u003cbr\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e3-Stage surge protection\u003c\/li\u003e\r\n\u003cli\u003eRJ11 Jacks\u003c\/li\u003e\r\n\u003cli\u003eProvision for shielded cables\u003c\/li\u003e\r\n\u003cli\u003eIndustrial grade cast aluminum construction\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003cli\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873965123,"sku":"HGLN-DT","price":140.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_HGLN-DT_18b9fe39-2f39-4047-8325-7617a8e87267.jpeg?v=1787933569"},{"product_id":"lpxt-wp-gbp60v-c1d2-data-line-protector-indoor-outdoor-1gb-poe-60v","title":"Data Line Protector Indoor\/Outdoor 1GB POE 60V","description":"\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/LPXT-WP-GBP60V-C1D2.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cp\u003eThe LPXT-WP Wallmount\/ Pole Mount Series of Broadband Communications Protectors are designed to protect data networks with combinations of high speed data protocols. The protection circuits utilize silicon avalanche diode technology. The units are available in plastic or cast aluminum enclosures. Both enclosure options are outdoor qualified NEMA 3R type enclosures with easy mounting flanges. The LPXT-WP Wallmount\/ Pole Mount series feature RJ-45 protection circuits for the Ethernet data pairs pins (1,2) (3,6) and DC un-polarized power pins (4,5) (7,8) for any combination of circuits up to 90VDC MCOV. The units are intended to be wall mounted and an optional bracket is available to allow a wide range of pole mount applications. The design incorporates a dedicated ground stud that must be bonded to the nearest grounding system (or Master Ground bar) for proper surge protection function. The system wiring is installed with RJ-45 type connectors that can feed directly into the chassis without having to cut or splice or route through strain relief holes. Both enclosure types include a built in cable retention feature for improved cable management. The plastic lid and base have molded fingers that grip the cables as the lid is attached. The metal enclosure has screw down clamps for maximum cable retention. In the unlikely event of surge protection self sacrifice, the individual protection cards will fail short to disrupt communication. The protection cards can be replaced for ease of service.\u003c\/p\u003e\r\n\u003cp\u003eINSTALLATION: These protectors can be installed indoors or outdoors, on a wall or on a pole. A dedicated  -20 ground stud with jam-nut is provided inside the enclosure units that must be bonded to the nearest grounding system. A pole mount adapter kit (PN LPXT-WP-PMT) is available to adapt to installations on a wide range of pole diameters.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIn-Line Protection for 10\/100 \u0026amp; Gigabit 1000 Mb\/s PoE Ethernet data lines\u003c\/li\u003e\r\n\u003cli\u003eProtected Pairs (1\/2), (4\/5), (3\/6) and (7,8)\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWireless LAN Access Points and Bridges\u003c\/li\u003e\r\n\u003cli\u003eWired Switches\u003c\/li\u003e\r\n\u003cli\u003eIP Surveillance Cameras\u003c\/li\u003e\r\n\u003cli\u003eVoIP (Voice over Internet Protocol) Telephones\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":12177741119555,"sku":"LPXT-WP-GBP60V-C1D2","price":174.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/LPXT-WP-GBP60V-C1D2_250x250_View1_1.jpg?v=1787932700"},{"product_id":"lpxt-wp-gb-poe-60v-data-line-protector-indoor-outdoor-1gb-poeplus-60v","title":"Data Line Protector Indoor\/Outdoor 1GB POE+ 60V","description":"\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/LPXT-WP-GBP60V-C1D2.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cp\u003eThe LPXT-WP Wallmount\/ Pole Mount Series of Broadband Communications Protectors are designed to protect data networks with combinations of high speed data protocols. The protection circuits utilize silicon avalanche diode technology. The units are available in plastic or cast aluminum enclosures. Both enclosure options are outdoor qualified NEMA 3R type enclosures with easy mounting flanges. The LPXT-WP Wallmount\/ Pole Mount series feature RJ-45 protection circuits for the Ethernet data pairs pins (1,2) (3,6) and DC un-polarized power pins (4,5) (7,8) for any combination of circuits up to 90VDC MCOV. The units are intended to be wall mounted and an optional bracket is available to allow a wide range of pole mount applications. The design incorporates a dedicated ground stud that must be bonded to the nearest grounding system (or Master Ground bar) for proper surge protection function. The system wiring is installed with RJ-45 type connectors that can feed directly into the chassis without having to cut or splice or route through strain relief holes. Both enclosure types include a built in cable retention feature for improved cable management. The plastic lid and base have molded fingers that grip the cables as the lid is attached. The metal enclosure has screw down clamps for maximum cable retention. In the unlikely event of surge protection self sacrifice, the individual protection cards will fail short to disrupt communication. The protection cards can be replaced for ease of service.\u003c\/p\u003e\r\n\u003cp\u003eINSTALLATION: These protectors can be installed indoors or outdoors, on a wall or on a pole. A dedicated  -20 ground stud with jam-nut is provided inside the enclosure units that must be bonded to the nearest grounding system. A pole mount adapter kit (PN LPXT-WP-PMT) is available to adapt to installations on a wide range of pole diameters.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIn-Line Protection for 10\/100 \u0026amp; Gigabit 1000 Mb\/s PoE Ethernet data lines\u003c\/li\u003e\r\n\u003cli\u003eProtected Pairs (1\/2), (4\/5), (3\/6) and (7,8)\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWireless LAN Access Points and Bridges\u003c\/li\u003e\r\n\u003cli\u003eWired Switches\u003c\/li\u003e\r\n\u003cli\u003eIP Surveillance Cameras\u003c\/li\u003e\r\n\u003cli\u003eVoIP (Voice over Internet Protocol) Telephones\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":12177748164675,"sku":"LPXT-WP-GB-POE+60V","price":107.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/LPXT-WP-GB-POE-60V_250x250_View1_1.jpg?v=1787932885"},{"product_id":"lpxt-wp-gb-poe-60v-data-line-protector-indoor-outdoor-1gb-poeplusplus-60v","title":"Data Line Protector Indoor\/Outdoor 1GB POE++ 60V","description":"\u003ca href=\"http:\/\/www.l-com.com\/Images\/Downloadables\/2D\/LPXT-WP-GBP60V-C1D2.pdf\"\u003eProduct Datasheet \u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\r\n\u003cp\u003eThe LPXT-WP Wallmount\/ Pole Mount Series of Broadband Communications Protectors are designed to protect data networks with combinations of high speed data protocols. The protection circuits utilize silicon avalanche diode technology. The units are available in plastic or cast aluminum enclosures. Both enclosure options are outdoor qualified NEMA 3R type enclosures with easy mounting flanges. The LPXT-WP Wallmount\/ Pole Mount series feature RJ-45 protection circuits for the Ethernet data pairs pins (1,2) (3,6) and DC un-polarized power pins (4,5) (7,8) for any combination of circuits up to 90VDC MCOV. The units are intended to be wall mounted and an optional bracket is available to allow a wide range of pole mount applications. The design incorporates a dedicated ground stud that must be bonded to the nearest grounding system (or Master Ground bar) for proper surge protection function. The system wiring is installed with RJ-45 type connectors that can feed directly into the chassis without having to cut or splice or route through strain relief holes. Both enclosure types include a built in cable retention feature for improved cable management. The plastic lid and base have molded fingers that grip the cables as the lid is attached. The metal enclosure has screw down clamps for maximum cable retention. In the unlikely event of surge protection self sacrifice, the individual protection cards will fail short to disrupt communication. The protection cards can be replaced for ease of service.\u003c\/p\u003e\r\n\u003cp\u003eINSTALLATION: These protectors can be installed indoors or outdoors, on a wall or on a pole. A dedicated  -20 ground stud with jam-nut is provided inside the enclosure units that must be bonded to the nearest grounding system. A pole mount adapter kit (PN LPXT-WP-PMT) is available to adapt to installations on a wide range of pole diameters.\u003c\/p\u003e\r\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eIn-Line Protection for 10\/100 \u0026amp; Gigabit 1000 Mb\/s PoE Ethernet data lines\u003c\/li\u003e\r\n\u003cli\u003eProtected Pairs (1\/2), (4\/5), (3\/6) and (7,8)\u003c\/li\u003e\r\n\u003cli\u003eIntegral mounting feet\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eWireless LAN Access Points and Bridges\u003c\/li\u003e\r\n\u003cli\u003eWired Switches\u003c\/li\u003e\r\n\u003cli\u003eIP Surveillance Cameras\u003c\/li\u003e\r\n\u003cli\u003eVoIP (Voice over Internet Protocol) Telephones\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":12177748197443,"sku":"LPXT-WP-GB-POE++60V","price":206.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/LPXT-WP-GB-POE--60V_250x250_View1_1.jpg?v=1787930473"},{"product_id":"lpxtrj45-gbpoe-data-surge-protector-indoor-gigabit-ethernet-poe-ieee-802-3bt-shielded-rj45","title":"Data Surge Protector, Indoor, Gigabit Ethernet PoE++ IEEE 802.3bt Shielded RJ45","description":"\u003cul class=\"tabs\"\u003e\r\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eFeatures\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c!--Start tab content--\u003e\r\n\u003cul class=\"tabs-content\"\u003e\r\n\u003cli class=\"active\" id=\"tab1\"\u003e\r\n\u003cp\u003eThe LPXTRJ45-GBPOE++ Compact Gigabit Ethernet Surge Protector is engineered for high performance, compact versatile surge protection of Gigabit Ethernet\/Power over Ethernet++ equipment. This product will reduce installation time and expense on the job site while giving your system the protection performance it needs and future-proofing it for any PoE system upgrades. The included DIN Rail Mount grounding clip allows for quick installation onto any standard 35mm DIN Rail and can also be used to wall mount the protector.\u003c\/p\u003e\r\n\u003cp\u003eNote: The clip must be securely grounded for proper operation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli id=\"tab2\"\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLightning protection circuits utilize high energy dissipation characteristics of gas discharge tube (GDT) technology, fast response time and repeatable low clamping characteristics of silicon avalanche suppression diodes\u003c\/li\u003e\r\n\u003cli\u003ePasses Power over Ethernet++ protocol per IEEE 802.3bt.\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ45 jack to pass system shield through.\u003c\/li\u003e\r\n\u003cli\u003eProtector can be mounted to a wall or 35mm DIN rail (DIN rail clip included and functions as ground connector)\u003c\/li\u003e\r\n\u003cli\u003eCost effective, light weight, easy to install and replace.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e10\/100\/1000 Base-T Ethernet equipment\u003c\/li\u003e\r\n\u003cli\u003eIntra-building cable runs\u003c\/li\u003e\r\n\u003cli\u003eIP, network or web cameras\u003c\/li\u003e\r\n\u003cli\u003eVoIP telephone\u003c\/li\u003e\r\n\u003cli\u003eWireless access points, servers and routers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli id=\"tab3\"\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_LPXTRJ45-GBPOEPP.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":31299457056828,"sku":"LPXTRJ45-GBPOE++","price":143.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_LPXTRJ45-GBPOEPP.jpg?v=1787931572"},{"product_id":"lpxtrj45-gbpoe-data-surge-protector-indoor-gigabit-ethernet-poe-ieee-802-3at-shielded-rj45","title":"Data Surge Protector, Indoor, Gigabit Ethernet PoE+ IEEE 802.3at Shielded RJ45","description":"\u003cul class=\"tabs\"\u003e\r\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eFeatures\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c!--Start tab content--\u003e\r\n\u003cul class=\"tabs-content\"\u003e\r\n\u003cli class=\"active\" id=\"tab1\"\u003e\r\n\u003cp\u003eThe LPXTRJ45-GBPOE+ Compact Gigabit Ethernet Surge Protector is engineered for high performance, compact versatile surge protection of Gigabit Ethernet\/Power over Ethernet+ equipment. This product will reduce installation time and expense on the job site while giving your system the protection performance it needs. The included DIN Rail Mount grounding clip allows for quick installation onto any standard 35mm DIN Rail and can also be used to wall mount the protector.\u003c\/p\u003e\r\n\u003cp\u003eNote: The clip must be securely grounded for proper operation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli id=\"tab2\"\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLightning protection circuits utilize high energy dissipation characteristics of gas discharge tube (GDT) technology, including a dedicated Shield to Ground protection element.\u003c\/li\u003e\r\n\u003cli\u003ePasses Power over Ethernet+ protocol per IEEE 802.3at.\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ45 jack to pass system shield through.\u003c\/li\u003e\r\n\u003cli\u003eProtector can be mounted to a wall or 35mm DIN rail (DIN rail clip included and functions as ground connector).\u003c\/li\u003e\r\n\u003cli\u003eCost effective, light weight, easy to install and replace.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e10\/100\/1000 Base-T Ethernet equipment\u003c\/li\u003e\r\n\u003cli\u003eIntra-building cable runs\u003c\/li\u003e\r\n\u003cli\u003eIP, network or web cameras\u003c\/li\u003e\r\n\u003cli\u003eVoIP telephone\u003c\/li\u003e\r\n\u003cli\u003eWireless access points, servers and routers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli id=\"tab3\"\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_LPXTRJ45-GBPOEP.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":31299457253436,"sku":"LPXTRJ45-GBPOE+","price":116.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_LPXTRJ45-GBPOEP.jpg?v=1787933238"},{"product_id":"lpxtrj45-gbpoe-data-surge-protector-indoor-gigabit-ethernet-poe-ieee-802-3af-shielded-rj45","title":"Data Surge Protector, Indoor, Gigabit Ethernet PoE IEEE 802.3af Shielded RJ45","description":"\u003cul class=\"tabs\"\u003e\r\n\u003cli\u003e\u003ca class=\"active\" href=\"#tab1\"\u003eDescription\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"#tab2\"\u003eFeatures\u003c\/a\u003e\u003c\/li\u003e\r\n\u003cli\u003e\u003ca href=\"#tab3\"\u003eDownloads\u003c\/a\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c!--Start tab content--\u003e\r\n\u003cul class=\"tabs-content\"\u003e\r\n\u003cli class=\"active\" id=\"tab1\"\u003e\r\n\u003cp\u003eThe LPXTRJ45-GBPOE Compact Gigabit Ethernet Surge Protector is engineered for high performance, compact versatile surge protection of Gigabit Ethernet\/Power over Ethernet equipment. This product will reduce installation time and expense on the job site while giving your system the protection performance it needs. The included DIN Rail Mount grounding clip allows for quick installation onto any standard 35mm DIN Rail and can also be used to wall mount the protector.\u003c\/p\u003e\r\n\u003cp\u003eNote: The clip must be securely grounded for proper operation.\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003cli id=\"tab2\"\u003e\r\n\u003cul\u003e\r\n\u003cli\u003eLightning protection circuits utilize high energy dissipation characteristics of gas discharge tube (GDT) technology.\u003c\/li\u003e\r\n\u003cli\u003ePasses Power over Ethernet per IEEE 802.3af.\u003c\/li\u003e\r\n\u003cli\u003eShielded RJ45 jack to pass system shield through.\u003c\/li\u003e\r\n\u003cli\u003eProtector can be mounted to a wall or 35mm DIN rail (DIN rail clip included and functions as ground connector).\u003c\/li\u003e\r\n\u003cli\u003eCost effective, light weight, easy to install and replace.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003cp\u003e\u003cstrong\u003eApplications:\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003cul\u003e\r\n\u003cli\u003e10\/100\/1000 Base-T Ethernet equipment\u003c\/li\u003e\r\n\u003cli\u003eIntra-building cable runs\u003c\/li\u003e\r\n\u003cli\u003eIP, network or web cameras\u003c\/li\u003e\r\n\u003cli\u003eVoIP telephone\u003c\/li\u003e\r\n\u003cli\u003eWireless access points, servers and routers\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003c\/li\u003e\r\n\u003cli id=\"tab3\"\u003e\r\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"http:\/\/www.l-com.com\/multimedia\/datasheets\/DS_LPXTRJ45-GBPOE.PDF\"\u003eProduct Datasheet \u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\r\n\u003c\/li\u003e\r\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":31299457318972,"sku":"LPXTRJ45-GBPOE","price":111.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_LPXTRAJ45-GBPOE.jpg?v=1787932936"}],"url":"https:\/\/itm-components.co.uk\/collections\/indoor-lightning-protector.oembed?page=3","provider":"ITM Components","version":"1.0","type":"link"}