{"title":"Weather Resistant Lightning Protector","description":"","products":[{"product_id":"weatherproof-4-line-telephone-dsl-lightning-surge-protector-screw-terminals","title":"Weatherproof 4-Line Telephone\/DSL Lightning Surge Protector - Screw Terminals","description":"The AL-D4-DTW is a high performance 3-stage weatherproof protector that provides superior protection of differential or balanced digital or analog lines from transients and surges. This unit will protect up to four pairs of differential data or analog signal\/control lines.\u003cbr\u003e\u003cbr\u003e The AL-D4-DTW series is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable. \u003cbr\u003e\u003cbr\u003e These protectors feature a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable screw terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to four pairs of lines\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873481731,"sku":"AL-D4-DTW","price":176.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D4-DTW.jpeg?v=1787930890"},{"product_id":"compact-weatherproof-10-100-base-t-cat5e-lightning-surge-protector-rj45-jacks","title":"ALS-CAT5EJWP CAT5e Lightning Surge Protector Weatherproof 10\/100 Base-T","description":"The ALS-CAT5EJWP Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10\/100 Base-T Ethernet networks. In addition, the unit is compatible with 802.3af\/at Power-over-Ethernet (PoE) devices. Integral to the design is protection for the four Ethernet data pairs and the PoE DC power feed. The unit supports both modes A and B of the 802.3af\/at standard for of supplying DC power.\u003cbr\u003e\u003cbr\u003e This unit supports normal and reverse polarity PoE used in some legacy Cisco Access Points. The ALS-CAT5EJWP is compatible with Wireless Access Points, Access Servers and Outdoor Routers, with or without Power-over-Ethernet (PoE) functionality. \u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass a un-booted RJ45 connector through so pre-terminated cables can be used.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCAT5 and CAT5e compatible\u003c\/li\u003e\n\u003cli\u003e802.3af\/at Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\n\u003cli\u003eShielded right angle RJ45 jacks\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with gasketed cover\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873489411,"sku":"ALS-CAT5EJWP","price":107.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/ALS-CAT5EJWP.jpg?v=1787932375"},{"product_id":"weatherproof-10-100-base-t-cat5e-lightning-surge-protector-screw-terminals","title":"Weatherproof 10\/100 Base-T CAT5e Lightning Surge Protector - Screw Terminals","description":"The Hyperlink AL-CAT5EW Lightning Protector provides superior lightning and surge protection with improved frequency response for both indoor and outdoor 10\/100 Base-T networks. The unit meets or exceeds CAT5e performance for the two data pairs. The design uses high frequency transmission line layout techniques to maintain an optimum 100 ohms balanced impedance in the signal path. These techniques and the use of Ultra-Low Capacitance Protection Arrays provide superior high frequency response and improved return loss for the data pairs. In addition, the unit is compatible with 802.3af Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. This unit supports normal and reverse polarity PoE.\u003cbr\u003e\u003cbr\u003e Features of this unit include a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable Terminal Strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. \u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click the Data Sheet link below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCAT5e Compatible\u003c\/li\u003e\n\u003cli\u003e802.11af Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003e10\/100 Base-T CAT5e protection\u003c\/li\u003e\n\u003cli\u003eGasketed cover, concealed mounting holes \u0026amp; ground clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable terminal strips\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873873731,"sku":"AL-CAT5EW","price":134.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_AL-CAT5EW_c0dcbd7f-07fa-4a37-a8c6-cf9e5e48eb67.jpeg?v=1787931469"},{"product_id":"weatherproof-hi-power-multi-port-10-100-base-t-cat5-lightning-protector-screw-terminals","title":"Weatherproof Hi-Power Multi-Port 10\/100 Base-T CAT5 Lightning Protector - Screw Terminals","description":"The Hyperlink CAT5 three-stage multi-port Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10\/100 Base-T networks. Up to four separate CAT5 lines can be protected by a single unit. In addition, the unit is compatible with Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. \u003cbr\u003e\u003cbr\u003e In the data path, the first stage of protection is a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a high speed, low capacitance diode clamp array. In the power path, the first stage is comprised of a differential gas discharge tube. Stage two is a dual low pass filter and the final stage is a triple array of bi-directional clamping diodes. The unit supports normal and reverse polarity PoE.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Architecture \u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The Advantage of the AL-CAT5HPW-4 three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.\u003cbr\u003e\u003cbr\u003e The AL-CATHPW-4 CAT5 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers, with or without Power-over-Ethernet (PoE) functionality. A ground clamp provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable. \u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eApplication Note:\u003c\/b\u003e This unit will not work with Cisco® Power Over Ethernet Injectors. Use HyperLink's Cisco® compatible BT-CAT5-P1R DC Injector.\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below\u0026gt;\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtect up to four separate CAT5 lines\u003c\/li\u003e\n\u003cli\u003eThree-stage protection\u003c\/li\u003e\n\u003cli\u003eFailsafe architecture \u0026amp; Weatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable terminal strips, with ground clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003eGasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873874115,"sku":"AL-CAT5HPW-4","price":565.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/pwd_AL-CAT5HPW-4_19e41c57-6495-4a02-a3b5-9687316888b1.jpeg?v=1787931844"},{"product_id":"weatherproof-hi-power-10-100-base-t-cat5-lightning-protector-screw-terminals","title":"Weatherproof Hi-Power 10\/100 Base-T CAT5 Lightning Protector - Screw Terminals","description":"The AL-CAT5HPWT is a high performance 3-stage weatherproof protector that provides superior protection 10\/100 Base-T networks. This model is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and provides individual protection to both the Ethernet data pairs as well as the PoE DC power feeds. The unit supports both modes A and B of the 802.3af standard for of supplying DC power.\u003cbr\u003e\u003cbr\u003e This arrester is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage.\u003cbr\u003e\u003cbr\u003e Ideal for outdoor use, the weatherproof ABS enclosure features a gasketed cover and concealed mounting holes. Screw terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection for all 8 wires\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with removable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873875075,"sku":"AL-CAT5HPWT","price":186.82,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5HPWT_0e8b40a6-d43a-445b-931d-ad46e651bb0e.jpeg?v=1787930323"},{"product_id":"weatherproof-hi-power-10-100-base-t-cat5-lightning-protector-shielded-rj45-jacks","title":"Weatherproof Hi-Power 10\/100 Base-T CAT5 Lightning Protector - Shielded RJ45 Jacks","description":"The AL-CAT5SHPW CAT5 three-stage Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10\/100 Base-T networks. In addition, the unit is compatible with Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eFailsafe Architecture\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The Advantage of this three stage surge protector design is the added level of protection due to its large power rating and safety due to its failsafe architecture. In the event of a catastrophic surge event, the series resistors will fuse and the shunt diodes will short. This will safely disconnect the line from the datacom equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eRugged Design and Ease of Use\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. For convenience terminal strips and shielded RJ45 Jacks are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. The shielded RJ45 Jacks helps reduce the effects of EMI interference. Their right angle design help ease the use of pre-terminated CAT5 Ethernet cable.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on Data Sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e3- stage protection with failsafe architecture\u003c\/li\u003e\n\u003cli\u003ePower-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eEasy access shielded RJ45 jacks and removable terminal strips\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with gasketed cover\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873875907,"sku":"AL-CAT5SHPW","price":159.87,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5SHPW_7da1107b-5d12-48cb-9585-4e555b60b097.jpeg?v=1787931821"},{"product_id":"weatherproof-10-100-base-t-cat5-lightning-protector-rj45-screw-terminals","title":"Weatherproof 10\/100 Base-T CAT5 Lightning Protector - RJ45\/Screw Terminals","description":"The AL-CAT5W CAT5 Lightning Protector provides superior lightning and surge protection for both indoor and outdoor 10\/100 Base-T networks. In addition, the unit is compatible with Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. This unit supports normal and reverse polarity PoE.\u003cbr\u003e\u003cbr\u003e This CAT5 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers, with or without Power-over-Ethernet (PoE) functionality. The AL-CAT5W also make an ideal alternative to the Transtector® ALPU-TSU protector. It features equal performance but at a substantial savings.\u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Both terminal strips and modular RJ45 female jacks are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eApplication Note:\u003c\/b\u003e This unit will not work with Cisco® Power Over Ethernet Injectors. Use HyperLink's Cisco® compatible BT-CAT5-P1R DC Injector.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see Data Sheet link below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eGasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eRemovable terminal strips and modular RJ45 jacks\u003c\/li\u003e\n\u003cli\u003eGround clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003ePower-Over-Ethernet (PoE) compatible that supports normal and reverse polarity PoE\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873878275,"sku":"AL-CAT5W","price":138.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5W_c19c16d2-dd37-431e-8b5d-5d368ba5bd18.jpeg?v=1787932250"},{"product_id":"weatherproof-multi-port-10-100-base-t-cat5-lightning-protector-rj45-jacks","title":"Weatherproof Multi-Port 10\/100 Base-T CAT5 Lightning Protector - RJ45 Jacks","description":"The AL-CAT5W-4 is a multi-port indoor and outdoor lightning surge arrestor, which provides protection for CAT5 data applications. A single unit protects up to four separate CAT5 lines. This model is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af standard for of supplying DC power.\u003cbr\u003e\u003cbr\u003e This protector is also available for 15 Volt and 24 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=33509%22\"\u003eAL-CAT5W-4-24\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 58 volts on the four cable pairs. The design utilizes Thyristor diode technology, which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e The AL-CAT5W-4 features a weatherproof ABS enclosure with O-ring gasket and concealed mounting holes. A ground clamp mounted outside the enclosure provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable. \u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see the Data Sheet below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtect up to four separate CAT5 lines\u003c\/li\u003e\n\u003cli\u003eProtection for all 8 wires per line\u003c\/li\u003e\n\u003cli\u003e802.3af Modes A and B Power-Over-Ethernet\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with O-ring gasket\u003c\/li\u003e\n\u003cli\u003eShielded RJ-45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873879107,"sku":"AL-CAT5W-4","price":260.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5W-4_e6b9c79d-dbd4-42d3-8725-36f9f00c5316.jpeg?v=1787930960"},{"product_id":"weatherproof-multi-port-10-100-base-t-24v-poe-cat5-lightning-protector-rj45-jacks","title":"Weatherproof Multi-Port 10\/100 Base-T 24V PoE CAT5 Lightning Protector - RJ45 Jacks","description":"The AL-CAT5W-4-24 is a multi-port indoor and outdoor lightning surge arrestor, which provides protection for CAT5 data applications. A single unit protects up to four separate CAT5 lines. This model is fully compatible with industry-standard 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both PoE modes A and B for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e High-speed semiconductors clamp any voltage, positive or negative on the wires. The limits are +\/- 36 volts on the four cable pairs. The design utilizes Thyristor diode technology, which has superior power handling capability compared to TVS or Zener diode based designs. The unit is compatible with both normal and inverted polarity voltage PoE equipment.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e15 Volt and 24 Volt PoE Compatible\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e Designed to be compatible with 15V and 24V PoE devices, the AL-CAT5W-4-24 is ideal for use with select devices from Motorola, Ubiquiti, Engenius and Planet as well as other PoE equipment requiring 15V or 24V. Canopy clusters can also take advantage of the multi-port design.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eNote: This protector is not intended for use with standard 48V PoE devices.\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This protector is also available for standard 48 Volt PoE applications, see model \u003ca href=\"\/item.aspx?id=30955%22\"\u003eAL-CAT5W-4\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e The AL-CAT5W-4-24 features a weatherproof ABS enclosure with O-ring gasket and concealed mounting holes. A ground clamp mounted outside the enclosure provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable. \u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see the Data Sheet below.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtect up to four separate CAT5 lines with protection for all 8 wires per line\u003c\/li\u003e\n\u003cli\u003eCompatible with 15V and 24V Power-Over-Ethernet (PoE) devices\u003c\/li\u003e\n\u003cli\u003eSupports PoE mode A and B for power\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with O-ring gasket\u003c\/li\u003e\n\u003cli\u003eShielded RJ-45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873879491,"sku":"AL-CAT5W-4-24","price":287.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT5W-4.jpeg?v=1787933431"},{"product_id":"weatherproof-10-100-1000-base-t-cat6-poe-compatible-lightning-protector-screw-term","title":"Weatherproof 10\/100\/1000 Base-T CAT6 PoE Compatible Lightning Protector - Screw Term.","description":"The AL-CAT6W Lightning Protector provides superior lightning and surge protection with improved frequency response for both indoor and outdoor 10\/100\/1000 Gigabit Ethernet networks. The unit meets or exceeds CAT6 performance for the four data pairs. The design uses high frequency transmission line layout techniques to maintain an optimum 100 ohms balanced impedance in the signal path. These techniques and the use of Ultra-Low Capacitance Protection Arrays provide superior high frequency response and improved return loss for the data pairs. In addition, the unit is compatible with 802.3af Power-over-Ethernet (PoE) devices. Integral to the design is protection for the two Ethernet data pairs and the PoE DC power feed. This unit supports normal and reverse polarity PoE.\u003cbr\u003e\u003cbr\u003e This CAT6 Lightning Protector is compatible with Wireless Access Points, Access Servers and Outdoor Routers, with or without Power-over-Ethernet (PoE) functionality. When using Motorola®\/Orthogon equipment, the AL-CAT6W is an ideal alternative to Transtector® protectors.\u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable Terminal Strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground. For maximum protection from lightning on long cable runs, two units can be used, one at each end of the cable.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eCisco Compatible Lightning Protector\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eNot sure which level of protection is required for your application...\u003c\/strong\u003e\u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eClick Here for our Power Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCAT6, CAT5e and CAT5 compatible\u003c\/li\u003e\n\u003cli\u003e10\/100\/1000 Base-T Gigabit Ethernet protection\u003c\/li\u003e\n\u003cli\u003ePower-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eGasketed cover, concealed mounting holes \u0026amp; ground clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003eCisco® Reverse Polarity PoE and Motorola®\/Orthogon compatible\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873882755,"sku":"AL-CAT6W","price":123.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CAT6W_f48fa1de-023e-4664-b891-8e6430e683fd.jpeg?v=1787932442"},{"product_id":"weatherproof-3-channel-4-20-ma-current-loop-protector-15v","title":"Weatherproof 3-Channel 4-20 mA Current Loop Protector - 15V","description":"The AL-CL3W-15 is a high performance 3-stage weatherproof protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect up to three 4-20 mA circuits. Provisions for use with shielded cable are provided.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to three pairs of lines plus provisions for shielded cables\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e15V, also available in 12V and 24V models\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873885251,"sku":"AL-CL3W-15","price":64.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CL3W-XX.jpeg?v=1787933534"},{"product_id":"weatherproof-3-channel-4-20-ma-current-loop-protector-24v","title":"Weatherproof 3-Channel 4-20 mA Current Loop Protector - 24V","description":"The AL-CL3W-24 is a high performance 3-stage weatherproof protector that provides superior protection of differential or common mode lines from transients and surges. These units will protect up to three 4-20 mA circuits. Provisions for use with shielded cable are provided.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to three pairs of lines plus provisions for shielded cables\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e24V, also available in 12V and 15V models\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873885379,"sku":"AL-CL3W-24","price":170.65,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CL3W-XX_89f6298f-040b-46be-9341-d83622dc993f.jpeg?v=1787930098"},{"product_id":"weatherproof-4-channel-4-20-ma-current-loop-protector-12v","title":"Weatherproof 4-Channel 4-20 mA Current Loop Protector - 12V","description":"The AL-CL4W-12 series are high performance 3-stage weatherproof protectors that provide superior protection of differential or common mode lines from transients and surges. These units will protect up to four 4-20 mA circuits.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to four pairs of lines\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e12V, also available in 15V and 24V models\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873887555,"sku":"AL-CL4W-12","price":152.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CL4W-XX_4579182f-645f-48c4-a76e-ed3bb2d05c18.jpeg?v=1787931626"},{"product_id":"weatherproof-4-channel-4-20-ma-current-loop-protector-15v","title":"Weatherproof 4-Channel 4-20 mA Current Loop Protector - 15V","description":"The AL-CL4W-15 series are high performance 3-stage weatherproof protectors that provide superior protection of differential or common mode lines from transients and surges. These units will protect up to four 4-20 mA circuits.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to four pairs of lines\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e15V, also available in 12V and 24V models\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873888387,"sku":"AL-CL4W-15","price":70.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CL4W-XX.jpeg?v=1787932205"},{"product_id":"weatherproof-4-channel-4-20-ma-current-loop-protector-24v","title":"Weatherproof 4-Channel 4-20 mA Current Loop Protector - 24V","description":"The AL-CL4W-24 series are high performance 3-stage weatherproof protectors that provide superior protection of differential or common mode lines from transients and surges. These units will protect up to four 4-20 mA circuits.\u003cbr\u003e\u003cbr\u003e The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the suppressor will not degrade the high-speed signals. The 3-stage design can handle higher-level transients than a protector that uses only diodes. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to four pairs of lines\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e24V, also available in 12V and 15V models\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873888771,"sku":"AL-CL4W-24","price":190.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-CL4W-XX_6a3acfb9-4691-49da-a6fe-2acdd7118b87.jpeg?v=1787931993"},{"product_id":"weather-resistant-lightning-surge-protector-for-rs-485-12-28vac-power-lines","title":"Weather Resistant Lightning Surge Protector for RS-485 \u0026 12-28VAC Power Lines","description":"The HyperLink AL-D15P1228AW is designed to provide superior lightning and surge protection for RS-485 control and 12-28VAC power lines. These protectors incorporate individual protection circuits for the RS-485 control lines and AC power lines. All housed in one weatherproof resistant enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the protector will not degrade the high-speed signals. The RS-485 control line is connected to the protector via its screw terminal blocks. The AL-D15P1228AW is designed to work with 1 half duplex RS-485 line.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e12-28VAC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The AC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and the final stage is a Metal Oxide Varistor (MOV). Power lines are connected to the protector via screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Resistant\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and holes are provided on the rear for mounting. The cable grommet may be adjusted to cable size and is removable.\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 5VDC: \u003ca href=\"\/item.aspx?id=42211%22\"\u003eAL-D15P05DW\u003c\/a\u003e\u003cbr\u003e 12VDC: \u003ca href=\"\/item.aspx?id=42213\"\u003eAL-D15P12DW\u003c\/a\u003e\u003cbr\u003e 15VDC: \u003ca href=\"\/item.aspx?id=42214\"\u003eAL-D15P15DW\u003c\/a\u003e\u003cbr\u003e 24VDC: \u003ca href=\"\/item.aspx?id=42215\"\u003eAL-D15P24DW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-485 control and power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill also protect two single ended data, analog or control lines\u003c\/li\u003e\n\u003cli\u003eImpact and weather resistant enclosure with locking hinged cover\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873889731,"sku":"AL-D15P1228AW","price":95.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D15P1228AW_7e034d53-4b8f-4ac7-9564-8d5caa3db158.jpeg?v=1787932470"},{"product_id":"weather-resistant-lightning-surge-protector-for-rs-485-12vdc-power-lines","title":"Weather Resistant Lightning Surge Protector for RS-485 \u0026 12VDC Power Lines","description":"The HyperLink AL-D15P12DW is designed to provide superior lightning and surge protection for RS-485 control and 12VDC power lines. These protectors incorporate individual protection circuits for the RS-485 control lines and DC power lines. All housed in one weatherproof resistant enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the protector will not degrade the high-speed signals. The RS-485 control line is connected to the protector via its screw terminal blocks. The AL-D15P12DW is designed to work with 1 half duplex RS-485 line.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e12VDC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The DC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and the final stage is a 1500 Watt uni-polar Transient Voltage Suppression (TVS) Diode. Power lines are connected to the protector via screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Resistant\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and holes are provided on the rear for mounting. The cable grommet may be adjusted to cable size and is removable.\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 5VDC: \u003ca href=\"\/item.aspx?id=42211%22\"\u003eAL-D15P05DW\u003c\/a\u003e\u003cbr\u003e 15VDC: \u003ca href=\"\/item.aspx?id=42214\"\u003eAL-D15P15DW\u003c\/a\u003e\u003cbr\u003e 24VDC: \u003ca href=\"\/item.aspx?id=42215\"\u003eAL-D15P24DW\u003c\/a\u003e\u003cbr\u003e 12-28VAC: \u003ca href=\"\/item.aspx?id=42212\"\u003eAL-D15P1228AW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-485 control and power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill also protect two single ended data, analog or control lines\u003c\/li\u003e\n\u003cli\u003eImpact and weather resistant enclosure with locking hinged cover\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873889859,"sku":"AL-D15P12DW","price":107.77,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D15P-_DW.jpeg?v=1787932999"},{"product_id":"weather-resistant-lightning-surge-protector-for-rs-485-15vdc-power-lines","title":"Weather Resistant Lightning Surge Protector for RS-485 \u0026 15VDC Power Lines","description":"The HyperLink AL-D15P15DW is designed to provide superior lightning and surge protection for RS-485 control and 15VDC power lines. These protectors incorporate individual protection circuits for the RS-485 control lines and DC power lines. All housed in one weatherproof resistant enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the protector will not degrade the high-speed signals. The RS-485 control line is connected to the protector via its screw terminal blocks. The AL-D15P15DW is designed to work with 1 half duplex RS-485 line.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e15VDC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The DC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and the final stage is a 1500 Watt uni-polar Transient Voltage Suppression (TVS) Diode. Power lines are connected to the protector via screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Resistant\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and holes are provided on the rear for mounting. The cable grommet may be adjusted to cable size and is removable.\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 5VDC: \u003ca href=\"\/item.aspx?id=42211%22\"\u003eAL-D15P05DW\u003c\/a\u003e\u003cbr\u003e 12VDC: \u003ca href=\"\/item.aspx?id=42213\"\u003eAL-D15P12DW\u003c\/a\u003e\u003cbr\u003e 24VDC: \u003ca href=\"\/item.aspx?id=42215\"\u003eAL-D15P24DW\u003c\/a\u003e\u003cbr\u003e 12-28VAC: \u003ca href=\"\/item.aspx?id=42212\"\u003eAL-D15P1228AW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-485 control and power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill also protect two single ended data, analog or control lines\u003c\/li\u003e\n\u003cli\u003eImpact and weather resistant enclosure with locking hinged cover\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873889987,"sku":"AL-D15P15DW","price":79.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D15P-_DW_1c607f3c-e187-48d4-9835-ad8c5c11a90e.jpeg?v=1787933028"},{"product_id":"weather-resistant-lightning-surge-protector-for-rs-485-24vdc-power-lines","title":"Weather Resistant Lightning Surge Protector for RS-485 \u0026 24VDC Power Lines","description":"The HyperLink AL-D15P24DW is designed to provide superior lightning and surge protection for RS-485 control and 24VDC power lines. These protectors incorporate individual protection circuits for the RS-485 control lines and DC power lines. All housed in one weatherproof resistant enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The use of three terminal differential gas discharge tubes provides superior common and differential mode protection against conducted transients versus the use of lower cost two terminal tubes. The second stage series resistance limits the power dissipation of the fast diode clamp array in the third stage. This allows time for the slower but higher power gas tubes to flash over. The diode array clamps the leading edge of fast transients to safe levels until the high power gas tubes turn on. This eliminates the damaging leading edge spike that single stage gas tube protectors let leak through. The diode array's low capacitance assures that the protector will not degrade the high-speed signals. The RS-485 control line is connected to the protector via its screw terminal blocks. The AL-D15P24DW is designed to work with 1 half duplex RS-485 line.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e24VDC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The DC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and the final stage is a 1500 Watt uni-polar Transient Voltage Suppression (TVS) Diode. Power lines are connected to the protector via screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Resistant\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The compact weather resistant housing features a lockable hinged cover and holes are provided on the rear for mounting. The cable grommet may be adjusted to cable size and is removable.\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 5VDC: \u003ca href=\"\/item.aspx?id=42211%22\"\u003eAL-D15P05DW\u003c\/a\u003e\u003cbr\u003e 12VDC: \u003ca href=\"\/item.aspx?id=42213\"\u003eAL-D15P12DW\u003c\/a\u003e\u003cbr\u003e 15VDC: \u003ca href=\"\/item.aspx?id=42214\"\u003eAL-D15P15DW\u003c\/a\u003e\u003cbr\u003e 12-28VAC: \u003ca href=\"\/item.aspx?id=42212\"\u003eAL-D15P1228AW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-485 control and power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill also protect two single ended data, analog or control lines\u003c\/li\u003e\n\u003cli\u003eImpact and weather resistant enclosure with locking hinged cover\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873890307,"sku":"AL-D15P24DW","price":113.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D15P-_DW_55a4c248-9ed8-4038-96cc-3300b5442175.jpeg?v=1787932850"},{"product_id":"weatherproof-3-stage-lightning-surge-protector-for-rs-485-lines","title":"AL-D3W-05  -  Weatherproof 3-Stage Lightning Surge Protector for RS-485 Lines","description":"The AL-D3W-05 is a high power 3-stage lightning and surge protector that provides superior protection of differential \/ balanced digital or analog lines from transients and surges. The unit will protect up to three pairs of lines or six single ended data, analog or control lines. Provisions for use with shielded cable are provided. \u003cbr\u003e\u003cbr\u003e The AL-D3W-05 is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable. \u003cbr\u003e\u003cbr\u003e This protector features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable screw terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e See data sheet below for complete specifications.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to three pair of lines plus provisions for shielded cables\u003c\/li\u003e\n\u003cli\u003eHigh power 3-stage surge protection, superior to diode or TVS only based designs\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminals\u003c\/li\u003e\n\u003cli\u003eGround clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873893507,"sku":"AL-D3W-05","price":181.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D3W-05_a572b19b-caa9-40b7-a816-272341dcc7f1.jpeg?v=1787930782"},{"product_id":"weatherproof-3-line-telephone-dsl-lightning-surge-protector-screw-terminals","title":"AL-D3W-DT  -  Weatherproof 3-Line Telephone\/DSL Lightning Surge Protector - Screw Terminals","description":"The AL-D3W-DT is a high power 3-stage lightning and surge protector that provides superior protection of differential \/ balanced digital or analog lines from transients and surges. The units will protect up to three pairs of differential data or analog signal\/control lines. Provisions for use with shielded cable are provided. \u003cbr\u003e\u003cbr\u003e The AL-D3W-DT is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable. \u003cbr\u003e\u003cbr\u003e This protector features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable screw terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e See data sheet below for complete specifications.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to three pairs of lines plus provisions for shielded cables\u003c\/li\u003e\n\u003cli\u003eHigh power 3-stage surge protection, superior to diode or TVS only based designs\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminals\u003c\/li\u003e\n\u003cli\u003eGround clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873894531,"sku":"AL-D3W-DT","price":185.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D3W-DT_a9ad05a5-4bc5-4065-981f-e6c7c57c84fe.jpeg?v=1787933443"},{"product_id":"weatherproof-3-stage-4-ch-lightning-surge-protector-for-rs-422-rs-485-lines","title":"AL-D4-05W  -  Weatherproof 3-Stage 4-Ch Lightning Surge Protector for RS-422 \u0026 RS-485 Lines","description":"The AL-D4-05W is a high performance 3-stage weatherproof protector that provides superior protection of differential or balanced digital or analog lines from transients and surges. This unit will protect up to four pairs of lines or eight single ended data, analog or control lines.\u003cbr\u003e\u003cbr\u003e The AL-D4-05W series is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage. The units are factory repairable. \u003cbr\u003e\u003cbr\u003e These protectors feature a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Removable screw terminal strips are provided on the input and output for convenience. To ease installation, the terminal strips can be removed. A ground clamp provides a tie point for earth ground. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eApplication Note:\u003c\/b\u003e Not for use with T1 lines with Ring or DC Power. \u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, see data sheet below.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for up to four pairs of lines\u003c\/li\u003e\n\u003cli\u003eThree-Stage protection\u003c\/li\u003e\n\u003cli\u003eSuperior to diode or TVS only based designs\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminal blocks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873894723,"sku":"AL-D4-05W","price":174.24,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-D4-05W_a57733c5-583c-4cba-a37a-6bceb3f2d6c2.jpeg?v=1787932537"},{"product_id":"weatherproof-single-stage-load-cell-rtd-lightning-surge-protector","title":"AL-LC  Weatherproof Single Stage Load Cell\/RTD Lightning Surge Protector","description":"The AL-LC is a high performance single stage lightning and surge protector that provides superior protection for devices such as load cells, weighbridges, resistance temperature detectors (RTD) and strain gage sensors. These types of devices contain sensitive and fragile components that can be easily damaged by lightning and power surges. The AL-LC provides protection to the signal lines, excitation lines, sense lines and shield lines. \u003cbr\u003e\u003cbr\u003e See data sheet for complete specifications.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtects signal, supply and shield lines\u003c\/li\u003e\n\u003cli\u003eReliable gas discharge tube protection\u003c\/li\u003e\n\u003cli\u003eGasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminals\u003c\/li\u003e\n\u003cli\u003eGround clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873915075,"sku":"AL-LC","price":145.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-LC_fdbfe588-811f-45a2-99de-5eb21a47c24e.jpeg?v=1787931588"},{"product_id":"weatherproof-3-stage-load-cell-rtd-lightning-surge-protector","title":"AL-LC-30  Weatherproof 3-Stage Load Cell\/RTD Lightning Surge Protector","description":"The AL-LC-30 is a high power 3-stage lightning and surge protector that provides superior protection for devices such as load cells, weighbridges, resistance temperature detectors (RTD) and strain gage sensors. These types of devices contain sensitive and fragile components that can be easily damaged by lightning and power surges. The AL-LC-30 provides maximum protection to the signal lines, excitation, sense lines and a shield line.\u003cbr\u003e\u003cbr\u003e The AL-LC-30 is designed to convert into a failsafe mode in the rare case of a catastrophic surge or lightning event. For this mode, the resistors in the second stage will fuse and portions of the diode array will short. This effectively disconnects the line from sensitive equipment thus limiting damage.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT25 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e See data sheet for complete specifications.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtects signal, supply and shield lines\u003c\/li\u003e\n\u003cli\u003eHigh power 3-stage surge protection\u003c\/li\u003e\n\u003cli\u003eGasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eRemovable screw terminals\u003c\/li\u003e\n\u003cli\u003eGround clamp provided on outside of enclosure\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873915267,"sku":"AL-LC-30","price":176.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_AL-LC-30_0f2d8d22-19e4-4427-a51a-fa0887f6f475.jpeg?v=1787931798"},{"product_id":"compact-weatherproof-10-100-base-t-cat5-lightning-protector-shielded-rj45","title":"Compact Weatherproof 10\/100 Base-T CAT5 Lightning Protector - Shielded RJ45","description":"The ALS-CAT5W is a indoor and outdoor lightning surge arrestor which provides protection for CAT5 data applications. This model is fully compatible with industry-standard Power-over-Ethernet (PoE) devices and 10\/100 Base-T Ethernet networks, providing protection to both Ethernet data pairs as well as the PoE DC power feed. The unit supports both modes A and B of the 802.3af\/at standard for of supplying DC power. Power can be fed up the CAT5 data pairs, 1-2, 3-6 or using the two unused pairs, 4-5, 7-8.\u003cbr\u003e\u003cbr\u003e This lightning surge protector is compatible with Cisco legacy network appliance products like Access Points, DC Injectors and other equipment supporting reverse polarity PoE pinouts.\u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass an un-booted RJ45 connector through so pre-terminated cables can be used.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on data sheet link below.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eProtection for all 8 wires\u003c\/li\u003e\n\u003cli\u003e802.3af\/at Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eSupports modes A and B PoE\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with gasketed cover\u003c\/li\u003e\n\u003cli\u003eShielded Right Angle RJ45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873928835,"sku":"ALS-CAT5W","price":97.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/ALS-CAT.jpg?v=1787931109"},{"product_id":"compact-weatherproof-10-100-1000-base-t-cat6-hi-power-lightning-protector-rj45-jacks","title":"Compact Weatherproof 10\/100\/1000 Base-T CAT6 Hi-Power Lightning Protector - RJ45 Jacks","description":"Note: This protector replaces the AL-CAT6HPW.\u003cbr\u003e\u003cbr\u003e    The ALS-CAT6HPW Lightning Protector provides superior lightning and surge protection for indoor 10\/100\/1000 Base-T Ethernet networks. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. The design provides protection for both common and differential mode surges. \u003cbr\u003e\u003cbr\u003e    This protector has been designed to meet the GR-1089 Intra-Building surge protection requirements for 10\/100\/1000 Base-T Ethernet lines. In addition, the unit is compatible with 802.3af\/at Power-over-Ethernet (PoE) devices. This device supports PoE mode A and B for power. The ALS-CAT6HPW shielded RJ45 jacks are isolated from the safety ground. This minimizes the chance of a ground loop being introduced. \u003cbr\u003e\u003cbr\u003e    This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass an un-booted RJ45 connector through so pre-terminated cables can be used.\u003cbr\u003e\u003cbr\u003e    For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e    For additional information and complete specifications, click on data sheet link below.\u003cbr\u003e\u003cbr\u003e    Not sure which level of protection is required for your application? \u003cbr\u003e  \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\u003cul\u003e\n\u003cli\u003eCAT6, CAT5e and CAT5 compatibility\u003c\/li\u003e\n\u003cli\u003eGR-1089 Intra-Building rated\u003c\/li\u003e\n\u003cli\u003eCable shield isolated from safety ground\u003c\/li\u003e\n\u003cli\u003eIEEE 802.11af\/at Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with gasketed cover and shielded RJ45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873928963,"sku":"ALS-CAT6HPW","price":161.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_ALS-CAT.jpeg?v=1787931349"},{"product_id":"compact-weatherproof-10-100-1000-base-t-cat6-gas-tube-lightning-protector-rj45-jacks","title":"CAT6 Gas Tube Lightning Protector Weatherproof 10\/100\/1000 Base-T RJ45 Jacks","description":"The ALS-CAT6JT Lightning Protector provides superior lightning and surge protection for indoor 10\/100\/1000 Base-T Ethernet networks. The unit has low line to line and line to ground capacitance to minimize distortion of high-speed signals. The design provides protection for both common and differential mode surges. \u003cbr\u003e\u003cbr\u003e This protector is compatible with 802.3af\/at Power-over-Ethernet (PoE) devices. This device supports PoE mode A and B for power. The ALS-CAT6JT shielded RJ45 jacks are isolated from the safety ground. This minimizes the chance of a ground loop being introduced. \u003cbr\u003e\u003cbr\u003e This unit features a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. PG16 cable glands are provided on the enclosure as well as an external ground clamp to provide a tie point for earth ground. The PG16 cable glands are large enough to pass an un-booted RJ45 connector through so pre-terminated cables can be used.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the Data Sheet link.\u003cbr\u003e\u003cbr\u003e Not sure which level of protection is required for your application? \u003cbr\u003e \u003ca href=\"\/content\/Data_Line_Protector_Comparison.html%22\"\u003eView Our Model Comparison Chart.\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eCAT6, CAT5e and CAT5 compatibility\u003c\/li\u003e\n\u003cli\u003eReliable differential gas tube protection\u003c\/li\u003e\n\u003cli\u003eCable shield isolated from safety ground\u003c\/li\u003e\n\u003cli\u003eIEEE 802.11af\/at Power-Over-Ethernet (PoE) compatible\u003c\/li\u003e\n\u003cli\u003eWeatherproof ABS enclosure with gasketed cover and shielded RJ45 jacks\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873929859,"sku":"ALS-CAT6JT","price":129.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/ALS-CAT_dd19ffc7-8197-46ca-b852-545821bf0a78.jpg?v=1787932217"},{"product_id":"weatherproof-lightning-surge-protector-for-rs-422-rs-485-12-28vac-power-lines","title":"Weatherproof Lightning Surge Protector for RS-422\/RS-485 \u0026 12-28VAC Power Lines","description":"The HyperLink ALS-D25P1228AW is designed to provide superior lightning and surge protection for RS-422\/485 control and 12-28VAC power lines. These protectors incorporate individual protection circuits for the RS-422\/485 control lines and DC power lines. All housed in one NEMA rated weatherproof enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-422\/485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-422\/485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The RS-422\/485 control line is connected to the protector via its screw terminal blocks. The terminal blocks are removable to ease wiring. The ALS-D25P1228AW is designed to work with either 1 full duplex or 2 half duplex RS-422\/485 lines.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e12-28VAC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The 12-28VAC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and in the final stage a Metal Oxide Varistor (MOV) is used. Power lines are connected to the protector via high current rated screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Design\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e These units feature a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Water tight cable glands provide entry and exit points for cables. A ground clamp on the enclosure's exterior provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 12VDC: \u003ca href=\"\/item.aspx?id=41937%22\"\u003eALS-D25P12DW\u003c\/a\u003e\u003cbr\u003e 15VDC: \u003ca href=\"\/item.aspx?id=41938\"\u003eALS-D25P15DW\u003c\/a\u003e\u003cbr\u003e 24VDC: \u003ca href=\"\/item.aspx?id=41939\"\u003eALS-D25P24DW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-422\/485 control lines and 12-28VAC power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill work with Full or Half Duplex RS-422\/485 lines\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eAlso available in 12VDC, 15VDC and 24VDC versions\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873930051,"sku":"ALS-D25P1228AW","price":152.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_ALS-D25P1228AW_92cf8a69-31be-4474-b11d-dd329cb19536.jpeg?v=1787932448"},{"product_id":"weatherproof-lightning-surge-protector-for-rs-422-rs-485-12vdc-power-lines","title":"Weatherproof Lightning Surge Protector for RS-422\/RS-485 \u0026 12VDC Power Lines","description":"The HyperLink ALS-D25P12DW is designed to provide superior lightning and surge protection for RS-422\/485 control and 12VDC power lines. These protectors incorporate individual protection circuits for the RS-422\/485 control lines and DC power lines. All housed in one NEMA rated weatherproof enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-422\/485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-422\/485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The RS-422\/485 control line is connected to the protector via its screw terminal blocks. The terminal blocks are removable to ease wiring. The ALS-D25P12DW is designed to work with either 1 full duplex or 2 half duplex RS-422\/485 lines.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e12VDC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The 12VDC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and the final stage is a 5000 Watt uni-polar Transient Voltage Suppression (TVS) Diode. Power lines are connected to the protector via high current rated screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Design\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e These units feature a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Water tight cable glands provide entry and exit points for cables. A ground clamp on the enclosure's exterior provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 15VDC: \u003ca href=\"\/item.aspx?id=41938%22\"\u003eALS-D25P15DW\u003c\/a\u003e\u003cbr\u003e 24VDC: \u003ca href=\"\/item.aspx?id=41939\"\u003eALS-D25P24DW\u003c\/a\u003e\u003cbr\u003e 12-28VAC: \u003ca href=\"\/item.aspx?id=41936\"\u003eALS-D25P1228AW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-422\/485 control lines and 12VDC power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill work with Full or Half Duplex RS-422\/485 lines\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eAlso available in 15VDC, 24VDC and 12-28VAC versions\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873930307,"sku":"ALS-D25P12DW","price":161.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_ALS-D25P_cf2ff55f-7074-40dd-9ebf-01ad229acc3c.jpeg?v=1787931776"},{"product_id":"weatherproof-lightning-surge-protector-for-rs-422-rs-485-15vdc-power-lines","title":"Weatherproof Lightning Surge Protector for RS-422\/RS-485 \u0026 15VDC Power Lines","description":"The HyperLink ALS-D25P15DW is designed to provide superior lightning and surge protection for RS-422\/485 control and 15VDC power lines. These protectors incorporate individual protection circuits for the RS-422\/485 control lines and DC power lines. All housed in one NEMA rated weatherproof enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-422\/485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-422\/485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The RS-422\/485 control line is connected to the protector via its screw terminal blocks. The terminal blocks are removable to ease wiring. The ALS-D25P15DW is designed to work with either 1 full duplex or 2 half duplex RS-422\/485 lines.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e15VDC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The 15VDC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and the final stage is a 5000 Watt uni-polar Transient Voltage Suppression (TVS) Diode. Power lines are connected to the protector via high current rated screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Design\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e These units feature a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Water tight cable glands provide entry and exit points for cables. A ground clamp on the enclosure's exterior provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 12VDC: \u003ca href=\"\/item.aspx?id=41937%22\"\u003eALS-D25P12DW\u003c\/a\u003e\u003cbr\u003e 24VDC: \u003ca href=\"\/item.aspx?id=41939\"\u003eALS-D25P24DW\u003c\/a\u003e\u003cbr\u003e 12-28VAC: \u003ca href=\"\/item.aspx?id=41936\"\u003eALS-D25P1228AW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-422\/485 control lines and 15VDC power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill work with Full or Half Duplex RS-422\/485 lines\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eAlso available in 12VDC, 24VDC and 12-28VAC versions\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873930563,"sku":"ALS-D25P15DW","price":156.28,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_ALS-D25P.jpeg?v=1787933489"},{"product_id":"weatherproof-lightning-surge-protector-for-rs-422-rs-485-24vdc-power-lines","title":"Weatherproof Lightning Surge Protector for RS-422\/RS-485 \u0026 24VDC Power Lines","description":"The HyperLink ALS-D25P24DW is designed to provide superior lightning and surge protection for RS-422\/485 control and 24VDC power lines. These protectors incorporate individual protection circuits for the RS-422\/485 control lines and DC power lines. All housed in one NEMA rated weatherproof enclosure. \u003cbr\u003e\u003cbr\u003e \u003cb\u003eRS-422\/485 Control Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e A high power 3-stage design is used to provide protection for the RS-422\/485 control line. The 3-stage design can handle higher-level transients than a protector that uses only diodes. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of current limiting series resistors and the final stage is a low capacitance diode array. The RS-422\/485 control line is connected to the protector via its screw terminal blocks. The terminal blocks are removable to ease wiring. The ALS-D25P24DW is designed to work with either 1 full duplex or 2 half duplex RS-422\/485 lines.\u003cbr\u003e\u003cbr\u003e \u003cb\u003e24VDC Power Lines\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e The 24VDC power lines are also protected using a 3-stage design. This provides superior protection from transients and surges. The first stage is comprised of a differential gas discharge tube. Stage two is a pair of suppression coils and the final stage is a 5000 Watt uni-polar Transient Voltage Suppression (TVS) Diode. Power lines are connected to the protector via high current rated screw terminals.\u003cbr\u003e\u003cbr\u003e \u003cb\u003eWeatherproof Design\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e These units feature a weatherproof ABS enclosure with gasketed cover and concealed mounting holes. Water tight cable glands provide entry and exit points for cables. A ground clamp on the enclosure's exterior provides a tie point for earth ground.\u003cbr\u003e\u003cbr\u003e For mounting to masts up to 2 inches in diameter, the HGX-PMT24 mast mounting kit is available (sold separately).\u003cbr\u003e\u003cbr\u003e This protector is also available in the following power configurations:\u003cbr\u003e 12VDC: \u003ca href=\"\/item.aspx?id=41937%22\"\u003eALS-D25P12DW\u003c\/a\u003e\u003cbr\u003e 15VDC: \u003ca href=\"\/item.aspx?id=41938\"\u003eALS-D25P15DW\u003c\/a\u003e\u003cbr\u003e 12-28VAC: \u003ca href=\"\/item.aspx?id=41936\"\u003eALS-D25P1228AW\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003e For additional information and complete specifications, click on the data sheet link below.\u003cbr\u003e\u003cbr\u003e\"\u003cbr\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eIndividual protection circuits for RS-422\/485 control lines and 24VDC power lines\u003c\/li\u003e\n\u003cli\u003e3-Stage protection provided for all lines\u003c\/li\u003e\n\u003cli\u003eWill work with Full or Half Duplex RS-422\/485 lines\u003c\/li\u003e\n\u003cli\u003eNEMA rated enclosure with gasketed cover and concealed mounting holes\u003c\/li\u003e\n\u003cli\u003eAlso available in 12VDC, 15VDC and 12-28VAC versions\u003c\/li\u003e\n\u003cli\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"L-Com","offers":[{"title":"Default Title","offer_id":8873930755,"sku":"ALS-D25P24DW","price":183.22,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/5892\/products\/PWD_ALS-D25P_7a405e34-70b6-47d5-b223-668b07384215.jpeg?v=1787930862"}],"url":"https:\/\/itm-components.co.uk\/collections\/weather-resistant-lightning-protector.oembed","provider":"ITM Components","version":"1.0","type":"link"}