The systems DL CAN connect CAN field bus networks (e.g. CAN, CANopen, DeviceNet) via fiber optics. With the help of this innovative system, optical bus, star, tree and mixed structures are possible.
The special multifunctional fiber optic system DL CAN-R also allows the construction of optical ring structures.
LEDs and potential-free contacts of a fault detector relay are able to signal defective states.
FiberView works similarly to a traffic light. If the “traffic light” is green, everything is fine. If the yellow LED lights, the budget is still tolerable, but already below a certain system reserve. Additionally to the LED, this pre-warning level is also signaled by a potential-free contact. If the “traffic light” turns red there is a serious error.
Type | P-ST | H-ST | MM-ST | MM-SC | MM-SC/BIDI | SM-ST | SM-SC | SM-E2 | SM-SC/BIDI |
---|---|---|---|---|---|---|---|---|---|
Article no. DL CAN |
01000 7401 |
01000 7412 |
01000 7421 |
01000 7423 |
01000 7423-BIDI A 7423-BIDI B |
01000 7431 |
01000 7433 |
01000 7435 |
01000 7433-BIDI A 7433-BIDI B |
Article no. DL CAN-2x |
01000 7451 |
01000 7462 |
01000 7471 |
01000 7473 |
01000 7473-BIDI |
01000 7481 |
01000 7483 |
01000 7485 |
01000 7483-BIDI |
Type | P-ST | H-ST | MM-ST | MM-SC | MM-SC/BIDI | SM-ST | SM-SC | SM-E2 | SM-SC/BIDI |
---|---|---|---|---|---|---|---|---|---|
Article no. DL CAN-R |
01000 7551 |
01000 7562 |
01000 7571 |
01000 7573 |
01000 7573-BIDI |
01000 7581 |
01000 7583 |
01000 7585 |
01000 7583-BIDI |
FO-connector | ST | ST | ST | SC | SC | ST | SC | E-2000 | SC |
Fiber type | POF 980/1000 μm |
HCS 200/230 μm |
Multimode 62,5 (50)/125 μm |
Singlemode 9/125 μm |
|||||
Optical budget | 12 dB | 12 dB | 12 dB | 16 dB | |||||
FO range | 50 m (180 dB/km) |
200 m (8 dB/km) |
5 km (1 dB/km) |
30 km, others up to 100 km on request (0,3 dB/km) |
|||||
Wavelength | 650 nm | 850 nm | 1310 nm | 1310 nm 1550 nm |
1310 nm | 1310 nm 1550 nm |
|||
Data rate max. | 10, 20, 22,2, 50, 100, 125, 250, 500, 800, 1000 KBaud Switchable: none or wave impedance (Rw + Rpd + Rpu) | ||||||||
Transmission type | Half duplex | ||||||||
Identifier | 11 Bit, 29 Bit or both | ||||||||
Terminating resistor | Switchable: none or wave impedance (Rw + Rpd + Rpu) | ||||||||
CAN Cable length | Acc. to CAN Specification | ||||||||
CAN Connector | 9-pole Sub-D female and 6-pole terminal | ||||||||
Status-LEDs | Power supply (green) / Failure (red) / Data receive (green) / Status (red) / FiberView (red, yellow, green) | ||||||||
Power supply | 12–30 VDC, other voltages on request | ||||||||
Power consumption | 5 Watts, 200 mA (24 V) | ||||||||
Potential separation | 500 VDC (24 VDC <> CAN) | ||||||||
Operating temperature | –40 °C – +70 °C (Multimode and Singlemode with ST or SC) / –20 °C – +55 °C (all others) | ||||||||
EMC | EN61000-6-2/EN55022 Class B + A1 + A2 | ||||||||
Weight | 570 g | ||||||||
Dimensions | 60 x 100 x 113 mm (60 x 120 x 113 mm incl. connector) | ||||||||
Housing | Stainless steel, powder coated |