Contact us for an immediate quote at sales@itm-components.co.uk

L-Com Antennas for Cellular Applications

by Stuart Berry January 14, 2016

L-Com Antennas for Cellular Applications

As cellular networks continue to grow and new cellular technologies evolve, L-com continues to support cellular wireless applications with its comprehensive HyperLink® brand antenna line.

The explosion of cellular communications is seen both in the private and public sectors with usage ranging from personal cell phones to industrial cellular modems used in factory and field communications systems.

Additionally the need for cellular communications support is seen with Distributed Antenna System (DAS) technology where WiFi (2.4 GHz and 5GHz communication) co-exist with typically 3G and 4G cellular traffic.

The chart shown here outlines the different cellular technologies and their frequencies and bands.

L-com stocks thousands of antennas designed to work with the most popular cellular frequencies, and for most customer requirements. Check out our Antenna Page for more details.




Stuart Berry
Stuart Berry

Author



Also in News

Certified by USB-IF - The FireNEX™-uHUB USB 3.0 Hub from Newnex

by Stuart Berry December 04, 2019

USB 3.0 4 Port Industrial Hub

Newnex 4-Port USB 3.0 Industrial Hub, FireNEX™-uHUB, receives the compliance certification from USB Implementers Forum (USB-IF, the organization that develops the USB standard) on November 8, 2019. This certification has been posted on the USB-IF integrators list and can be found with Test Identification Number (TID) 2388.

Continue Reading

New VPI 4K HDMI Active Cable with Signal Booster

by Stuart Berry November 26, 2019

Fan-aspirated temperature humidity dew point sensor

VPI’s 4K HDMI Active Cables enhance the video signal without the use of an external power source. The embedded chipset boosts the signal from the source, ideal for connecting a 4K display at longer distances than a standard HDMI cable. These cables are directional with connector ends that are labeled.

Continue Reading

NTI Introduces a Fan-Aspirated Temperature/Humidity/Dew Point Sensor

by Stuart Berry November 04, 2019

Fan-aspirated temperature humidity dew point sensor

The E-STHS-LSH has an internal fan that consistently draws air in over the sensor, providing highly accurate temperature readings. It is ideal for installations where steep temperature gradients are common, where there is little to no air flow, or for use in freezers where there is intermittent air flow.

Continue Reading