Contact us for an immediate quote at sales@itm-components.co.uk

HDMI and DisplayPort EDID Emulators now available

by Stuart Berry July 29, 2019

NTI Emulators - HDMI and Displayport

The HDMI 2.0 EDID Emulator and the DisplayPort 1.2 EDID Emulator from NTI are our newest piece of tech. The emulators copy the EDID of the desired display and connect directly to the source to ensure that the EDID is not lost in connections between devices such as switches, splitters, and extenders.

The EDID Emulators are a handy size for simple installation and operation, and feature LED indicators that provide signal status information, powered by the connected video source, and pre-programmed with many standard resolutions with native set to 1080p. Both models support Ultra-HD 4Kx2K resolutions to 3840x2160 @60Hz 4:4:4, 2560x1440p (WQHD), and HDTV resolutions to 1080p as standard. The devices emulate a display (sink device) by providing Hot Plug Detect and EDID to the source device.

The HD4K-EDID-EMLTR supports HDMI 2.0, 12-bit Deep Color, RGB, YCC 4:4:4, YCC 4:2:2, Dolby, LPCM, DTS, bandwidth up to 18Gbps, CEC compatible devices, 3D, and HDR. The DP4K-EDID-EMLTR supports DisplayPort v1.2a, 10-bit Deep Color, RGB, YCC 4:4:4, YCC 4:2:2, LPCM, and bandwidth up to 5.4Gbps per channel (21.6Gbps total).

The emulators support learning and emulation modes. With learning mode, the display’s EDID is stored for later use. In emulation mode, it provides EDID to the source device from the emulator’s internal memory. The HD4K-EDID-EMLTR supports headless operation – no monitor attached to source. The emulators are ideal for resolving signal handshaking problems between a source and a display.

The HD4K-EDID-EMLTR HDMI 2.0 EDID Emulator and the DP4K-EDID-EMLTR DisplayPort 1.2 EDID Emulator are available now. For more information on these, contact our ever-friendly technical sales team.




Stuart Berry
Stuart Berry

Author



Also in News

Low-Loss Coax Cables for Wireless Applications

by Stuart Berry October 16, 2020

Low-loss Coax Cables - L-com

It may seem bizarre to say it, but a wireless network still needs cables. All the different parts of a wireless network, such as the access points, the amplifiers and antennas, all need cables to communicate with each another.

Continue Reading

2x1 4K HDR HDMI Auto Switcher - New from Kramer

by Stuart Berry October 15, 2020

2x1 Auto Switcher from Kramer

VS−211X is a high−performance 2x1 automatic switcher for 4K HDR, HDMI video signals. Offering priority and last−connected switching options, it automatically switches according to the selected switching scheme based on active video signal detection.

This is a standard hi–quality auto switcher for any AV distribution installation. Perfect for switching in huddle spaces, and standard meeting and training rooms.

Continue Reading

New CAT6 Foiled Twisted Pair (FTP) cable from VPI

by Stuart Berry September 14, 2020

CAT6-LASV2-2-GRAY-SHLD and CAT6-LASV2-9-GRAY-SHLD

These left angle Category 6 patch cords are assembled with T568B four pair stranded cable, and are ideal for confined spaces. They consist of a foil shield with drain wire to protect signals from external noise, and a strain relief boot to reduce stress on the cable.

CAT6 is completely backward-compatible with current CAT5e equipment.

Continue Reading