The XTENDEX® 4K HDMI USB KVM Extender Over IP with Video Wall Support is the newest member of its popular line of KVM extenders. It provides remote KVM (USB keyboard, USB mouse, and 4Kx2K HDMI monitor) access to a USB computer up to 400 feet (122 meters) over a Gigabit network using a single CAT5e/6 cable. The extender consists of the ST-IPUSB4K-L-VW local unit that connects to a computer and the ST-IPUSB4K-R-VW remote unit that connects to an HDMI monitor, 3.5mm stereo audio speakers, and up to four USB devices (keyboard, mouse, flashdrive, HDD, or touchscreen display).
The local and remote units can be connected together for a Point-to-Point connection up to 400 feet via CAT5e/6 cable or a Point-to-Many connection via a Gigabit network switch up to 1,000 feet. Support for multiple transmitters requires a managed Gigabit network switch with VLAN/IGMP support. Video wall installations from 1x2 to 8x8 screens are supported and managed using the built-in software. The displays can be rotated 90, 180 and 270°.
The extender supports Ultra-HD 4Kx2K resolutions to 3840x2160 (30Hz), is HDCP compliant, and can load individual EDID tables from monitors. The four USB ports on the receiver are used to connect a keyboard, mouse, flashdrive, and/or Hard Disk Drive (HDD). The unit provides full Infrared Remote (IR) control of the HDMI source from the remote HDTV using the existing source remote control. Support for 2-way RS232 commands at a baud rate up to 115200 enables flexible control of devices attached to the extender.
For further details, please check our product pages or contact our techsales team.
These left angle Category 6 patch cords are assembled with T568B four pair stranded cable, and are ideal for confined spaces. They consist of a foil shield with drain wire to protect signals from external noise, and a strain relief boot to reduce stress on the cable.
CAT6 is completely backward-compatible with current CAT5e equipment.
Introducing the Extron USB-C HD 101 USB-C to HDMI interface. This new interface provides USB-C video connectivity to HDMI device inputs, while supporting the power and charging needs for USB-C source devices. The USB-C HD 101 converts USB-C video to HDMI.
With Extron's NetPA® Ultra amplifiers, you benefit from our award winning XPA Ultra amplifiers in combination with immensely powerful Dante network audio distribution. Dante connectivity makes it supremely easy to distribute audio from a centralized location to decentralized remote amplifiers throughout a building or campus using standard network hardware.