Contact us for an immediate quote at sales@itm-components.co.uk

New Advanced Four Input 4K/60 4:4:4 HDCP 2.2 Switcher with Integrated DTP2 Transmitter

by Stuart Berry September 27, 2019

DTP2 T204

The Extron DTP2 T 204, a four-input switcher with integrated DTP2 transmitter for sending HDMI and control up to 330 feet (100 meters) over a shielded CATx cable to an Extron DTP-enabled product, is the newest addition to Extron's range of DTP Systems. It supports computer and video resolutions up to 4K/60 at 4:4:4 chroma sampling. This HDCP 2.2-compliant switcher includes many integrator-friendly features, such as the handy EDID Minder, Key Minder, and selectable HDCP authorization. Using ethernet control, you can enable centralized system management. The half-rack width enclosure enables discreet placement within lecterns, beneath tables, or wherever needed to meet application requirements and decor requirements.

The DTP2 T 204 switcher provides reliable routing of HDMI video at data rates up to 18 Gbps, along with HDR, Deep Color up to 12-bit, 3D, and embedded HD lossless audio formats. For simplified installation, it can be remotely powered by a DTP2‑enabled product over the twisted pair connection. It can also be configured to provide power to the connected DTP2 receiver product. DDC communication of EDID and HDCP is continuously maintained between source and display to ensure direct compatibility and optimal signal transmission between devices. The DTP2 T 204 switcher also features contact closure and tally outputs for integration with Extron Show Me cables.




Stuart Berry
Stuart Berry

Author



Also in News

Certified by USB-IF - The FireNEX™-uHUB USB 3.0 Hub from Newnex

by Stuart Berry December 04, 2019

USB 3.0 4 Port Industrial Hub

Newnex 4-Port USB 3.0 Industrial Hub, FireNEX™-uHUB, receives the compliance certification from USB Implementers Forum (USB-IF, the organization that develops the USB standard) on November 8, 2019. This certification has been posted on the USB-IF integrators list and can be found with Test Identification Number (TID) 2388.

Continue Reading

New VPI 4K HDMI Active Cable with Signal Booster

by Stuart Berry November 26, 2019

Fan-aspirated temperature humidity dew point sensor

VPI’s 4K HDMI Active Cables enhance the video signal without the use of an external power source. The embedded chipset boosts the signal from the source, ideal for connecting a 4K display at longer distances than a standard HDMI cable. These cables are directional with connector ends that are labeled.

Continue Reading

NTI Introduces a Fan-Aspirated Temperature/Humidity/Dew Point Sensor

by Stuart Berry November 04, 2019

Fan-aspirated temperature humidity dew point sensor

The E-STHS-LSH has an internal fan that consistently draws air in over the sensor, providing highly accurate temperature readings. It is ideal for installations where steep temperature gradients are common, where there is little to no air flow, or for use in freezers where there is intermittent air flow.

Continue Reading