Contact us for an immediate quote at sales@itm-components.co.uk

Now Shipping - 4K DisplayPort KVM Over IP Receiver

by Stuart Berry July 17, 2018

4K Displayport KVM Over IP Receiver

The EXT-DPKA-LANS-RX features a maximum output resolution of 4K 30 Hz 4:4:4. HDCP 2.2 and 1.4 are also supported. USB, RS-232 2-way IR, and audio can be routed independently between any Sender and Receiver unit, allowing end-users to control any of the sources and the displays within their network.

This Receiver features a built-in scaler to help optimize the image for a variety of displays and different viewing environments. It also includes a powerful video-wall controller that accommodates screen configurations up to 16x16, providing flexibility in sizing and manipulating live and signage content in demanding installations.

Digital and analog audio break-out de-embeds audio from the video and sends it to a separate audio system, enhancing the impact of presentations.

The Receiver’s integrated USB hub with two USB 2.0 and two USB 1.1 ports accommodates touch panels, keyboard and mouse, and a variety of supported devices. This feature, along with analog audio inputs and outputs, makes the new AV over IP products perfect to use in collaborative and interactive installations. To ensure maximum versatility and compatibility, the audio outputs on the Receiver units are compatible with both headphones and line level devices such as powered speakers.

The new KM Emulation feature facilitates real-time, simultaneous Keyboard and Mouse control of each source from connected workstations, eliminating the inherent limitations of earlier systems. Power-over-Ethernet allows the new Receiver unit to be powered through a standard PoE-enabled IP network switch, without the need for external power supplies.

When used with the EXT-CU-LAN Matrix Controller, system configuration is automated and quick. Enhanced network security by separating the control and AV networks is also made possible with the EXT-CU-LAN. The Enhanced Gefen API provides added functionality and facilitates use with third-party controllers.

A built-in 2-port Gigabit switch allows daisy-chaining of additional Receivers. In applications where there is a need to replicate content on multiple displays, the ability to cascade Receivers extends the range of these units far beyond the limits of a point-to-point video distribution system.

Click the following links for more information on the 4K Displayport KVM Over IP Receiver




Stuart Berry
Stuart Berry

Author



Also in News

New CAT6 Foiled Twisted Pair (FTP) cable from VPI

by Stuart Berry September 14, 2020

CAT6-LASV2-2-GRAY-SHLD and CAT6-LASV2-9-GRAY-SHLD

These left angle Category 6 patch cords are assembled with T568B four pair stranded cable, and are ideal for confined spaces. They consist of a foil shield with drain wire to protect signals from external noise, and a strain relief boot to reduce stress on the cable.

CAT6 is completely backward-compatible with current CAT5e equipment.

Continue Reading

The Extron USB-C to HDMI Interface

by Stuart Berry August 17, 2020

USB-C to HDMI Interface Extron

Introducing the Extron USB-C HD 101 USB-C to HDMI interface. This new interface provides USB-C video connectivity to HDMI device inputs, while supporting the power and charging needs for USB-C source devices. The USB-C HD 101 converts USB-C video to HDMI.

Continue Reading

NetPA® Ultra amplifiers - Now with Dante

by Stuart Berry July 31, 2020

Dante

With Extron's NetPA® Ultra amplifiers, you benefit from our award winning XPA Ultra amplifiers in combination with immensely powerful Dante network audio distribution. Dante connectivity makes it supremely easy to distribute audio from a centralized location to decentralized remote amplifiers throughout a building or campus using standard network hardware.

Continue Reading