The E-STHS-LSH has an internal fan that consistently draws air in over the sensor, providing highly accurate temperature readings. It is ideal for installations where steep temperature gradients are common, where there is little to no air flow, or for use in freezers where there is intermittent air flow.
The Fan-Aspirated Sensor supports applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity, and supports dew point measurement. It has a temperature accuracy of ±0.90°F (±0.5°C) for -4 to 14°F (-20 to -10°C) and ±0.72°F (±0.4°C) for 14 to 140°F (-10 to 60°C). Humidity accuracy is ±3% at 10 to 80% relative humidity and ±4% at 80 to 90% relative humidity. The sensors’ aspiration rate is 1 cfm (0.2 ft/s).
The Fan-Aspirated Temperature/Humidity Sensor interfaces with the E-2D/5D/16D Enterprise Environment Monitoring Systems via the RJ45 sensor port, and can be extended up to 1.2 miles (2km) away from the ENVIROMUX unit using the E-FSC Fiber Converter/Extender.
These left angle Category 6 patch cords are assembled with T568B four pair stranded cable, and are ideal for confined spaces. They consist of a foil shield with drain wire to protect signals from external noise, and a strain relief boot to reduce stress on the cable.
CAT6 is completely backward-compatible with current CAT5e equipment.
Introducing the Extron USB-C HD 101 USB-C to HDMI interface. This new interface provides USB-C video connectivity to HDMI device inputs, while supporting the power and charging needs for USB-C source devices. The USB-C HD 101 converts USB-C video to HDMI.
With Extron's NetPA® Ultra amplifiers, you benefit from our award winning XPA Ultra amplifiers in combination with immensely powerful Dante network audio distribution. Dante connectivity makes it supremely easy to distribute audio from a centralized location to decentralized remote amplifiers throughout a building or campus using standard network hardware.