Contact us for an immediate quote at sales@itm-components.co.uk
NTI

Route Ultra-HD with the New NTI Low-Cost 4K HDMI Video Matrix Switch

by Stuart Berry August 28, 2017

The New VEEMUX® Low-Cost 4K HDMI Video Matrix Switch is the newest addition to its popular line of video matrix switches. The matrix switch routes Ultra-HD 4Kx2K digital video and audio signals from many HDMI video sources to multiple displays.

The multiple HDMI video sources, such as computers, Blu-Ray players, satellite receivers, etc, are routed to multiple displays such as monitors, 4K Televisions, or projectors. The Matrix Switch is available in two sizes – 4x4 and 8x8. Both models support HDMI-embedded audio switching, while the 8x8 model also boasts eight SPDIF digital audio outputs. Audio can be switched independently of the video signal from connected HDMI sources.

The Low-Cost 4K HDMI Video Matrix Switch supports Ultra-HD 4Kx2K resolutions of 4096x2160 and 3840x2160 24/30/60Hz YUV 4:4:4, and HDTV resolutions to 1080p. Configure and control the switch through front panel buttons, Ethernet, IR remote control, or RS232. It is CE, FCC and RoHS compliant.

HDMI features supported include: HDMI 2.0; Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS 7.1 and LPCM; YUV 4:4:4, HDR; 3D; Bandwidth up to 600 Mhz (18 Gbps); and Lip Sync. The unit is HDCP 2.2 compliant and has a configurable built-in EDID table. The Low-Cost 4K HDMI Video Matrix Switch has a compact 1RU design and includes a rack mounting kit.

This VEEMUX switch is the ideal solution for any situation where information from many video sources is being presented, such as a digital signage, classroom, boardroom, trade show, conference or entertainment application.

SM-4X4-4K18GB-LC

SM-8X8-4K18GB-LC




Stuart Berry
Stuart Berry

Author



Also in News

New CAT6 Foiled Twisted Pair (FTP) cable from VPI

by Stuart Berry September 14, 2020

CAT6-LASV2-2-GRAY-SHLD and CAT6-LASV2-9-GRAY-SHLD

These left angle Category 6 patch cords are assembled with T568B four pair stranded cable, and are ideal for confined spaces. They consist of a foil shield with drain wire to protect signals from external noise, and a strain relief boot to reduce stress on the cable.

CAT6 is completely backward-compatible with current CAT5e equipment.

Continue Reading

The Extron USB-C to HDMI Interface

by Stuart Berry August 17, 2020

USB-C to HDMI Interface Extron

Introducing the Extron USB-C HD 101 USB-C to HDMI interface. This new interface provides USB-C video connectivity to HDMI device inputs, while supporting the power and charging needs for USB-C source devices. The USB-C HD 101 converts USB-C video to HDMI.

Continue Reading

NetPA® Ultra amplifiers - Now with Dante

by Stuart Berry July 31, 2020

Dante

With Extron's NetPA® Ultra amplifiers, you benefit from our award winning XPA Ultra amplifiers in combination with immensely powerful Dante network audio distribution. Dante connectivity makes it supremely easy to distribute audio from a centralized location to decentralized remote amplifiers throughout a building or campus using standard network hardware.

Continue Reading