The XTENDEX® 4K HDMI 18Gbps Over IP Extender multicasts 4K HDMI 18Gbps digital video and audio signals to one or more receivers up to 328 feet away (100 meters) over a 10-Gigabit Ethernet network using a single CAT6/6a/7 cable.
The extender consists of a local unit, (ST-IP4K18GB-L-RS), that connects to a 4K HDMI source, and a remote unit, (ST-IP4K18GB-R-RS), that connects to a 4K HDMI display. The local and remote units can be connected together for a Point-to-Point connection via CAT6/6a/7 cable, or a Point-to-Many or Many-to-Many connection via a 10-Gigabit network switch. Support for multiple transmitters requires a managed 10GB network switch.
There is an Optional Video Over IP Controller for use with ST-IP4K18GB-L/R-RS. This requires a managed 10GB network switch with IGMP snooping.
Contact our Technical Sales Team for more details.
It may seem bizarre to say it, but a wireless network still needs cables. All the different parts of a wireless network, such as the access points, the amplifiers and antennas, all need cables to communicate with each another.
VS−211X is a high−performance 2x1 automatic switcher for 4K HDR, HDMI video signals. Offering priority and last−connected switching options, it automatically switches according to the selected switching scheme based on active video signal detection.
This is a standard hi–quality auto switcher for any AV distribution installation. Perfect for switching in huddle spaces, and standard meeting and training rooms.
These left angle Category 6 patch cords are assembled with T568B four pair stranded cable, and are ideal for confined spaces. They consist of a foil shield with drain wire to protect signals from external noise, and a strain relief boot to reduce stress on the cable.
CAT6 is completely backward-compatible with current CAT5e equipment.