This product is RoHS-compliant

Please contact us if you require a non-RoHS version.

Please note, Acces I/O products are often available in an array of different options, of which only a selection will be displayed here. Please contact us for pricing if you require a product option that is not shown on our website.

The USB-104-HUB is a high performance, industrial grade, mountable solution for USB expansion. It is a high-speed USB 2.0 device, USB 3.0 and 1.1 compatible. Each of the four downstream ports are capable of high speed (480Mbps), full-speed (12Mbps), and low-speed (1.5Mbps) data transfers.

This product utilizes a high-performance, low-power USB 2.0 hub controller. It is USB-IF certified, Windows Hardware Quality Lab (WHQL) compliant, and its extended operating temperature is rated for industrial and military grade applications. The USB-104-HUB was designed to withstand a variety of environmental conditions such as shock, vibration, and temperature. The small, low profile, steel enclosure allows the device to be installed in numerous locations where multiple USB devices must share a single USB port.

Each card has light emitting diodes (LEDs) for status indications. A green LED near the upstream USB type B connector indicates power to the board. Each downstream port has two respective surface mount LEDs that provides status information. Its green LED near the downstream port's Type A receptacle indicates that the port is enabled whereas the red LED indicates an overcurrent fault condition. The customer also has the option to use jumper posts to connect their own LEDs instead of the on-board surface mount indicators if desired.

The USB-104-HUB is fully protected from faulty peripherals connected to its downstream ports. Each port utilizes its own power distribution switch that provides overcurrent and short-circuit protection. If a fault occurs, the power distribution switch will disengage the respective port and turn on its fault LED. A fault occurring on one downstream port will not affect other devices attached to the USB-104-HUB inchs other downstream ports.

The USB-104-HUB supports bus powered and self-powered applications. In general, the upstream USB port typically provides 500 mA of current (5-unit load). In bus-powered mode, this is the limiting factor as the downstream ports take power from the upstream port's remaining available power. If the user's application requires more current for downstream peripherals, the USB-104-HUB can be configured in self-powered mode. External +5V can be supplied to the card through three different methods. It can be accessed through a DC power input jack, or for OEM applications, via 2-position screw terminals or a traditional 4-pin berg connector receptacle.

The USB-104-HUB is designed to be used in rugged industrial environments but is small enough to fit nicely onto any desk or testing station. The board itself is PC/104 sized (3.550 x 3.775 inches, 90mm x 96mm) and ships inside a steel powder-coated enclosure with an anti-skid bottom. Mounting provisions available include DIN rail and standard PC 3.5? front panel drive bay mounting.

OEM USB/104 FORM FACTOR

The OEM (board only) version is perfect for a variety of embedded applications. What makes the OEM option unique is that the PCB size and pre-drilled mounting holes match the PC/104 form factor (without the bus connections). This ensures easy installation using standard standoffs inside most enclosures or systems. The board can be added to any PC/104-based stack by connecting it to a USB port usually included on-board with embedded CPU form factors such as EBX, EPIC, and PC/104. This is especially important since many newer CPU chipsets do not support ISA and have plenty of USB ports. The USB-104-HUB OEM board can also be installed using standoffs inside other enclosures or systems. For embedded OEM type applications, an additional micro-fit USB input header is provided in parallel with the type B connector.