Ask for a quote at sales@itm-components.co.uk

Antennas

WiFi antenna and wireless antenna products from L-com are available in 400 MHz to 5.8 GHz frequencies to address many wireless LAN applications including WISP, SCADA, RFID, public hotspot, WiMAX, ISM,UNII, public safety, cellular, LTE, PCS services, and more.

These high performance HyperLink® brand WiFi antennas include a wide selection of Yagi antenna, Omni directional antenna, indoor antenna, and outdoor WiFi antenna styles.

ITM Components are able to supply the full range of L-Com Antennas. If a particular option is not on our website, please contact us to obtain further details and pricing.



Search Antennas →

L-Com Antennas

GPS/Cellular/Wifi Multiband - for DAS, AWS and PCS
HyperLink Wireless HG-PCGM Series are small form factor, high performance, combination GPS/Cellular (3G/LTE) antennas aimed at automatic vehicle locator and fleet tracking management systems that serve public safety, railroad, agriculture, utility, mass transit, and defense industries among others.

HyperLink Wireless multi-band mobile antennas are designed to operate from 698-960 MHz to 1710-2700 MHz, making them ideal for Cellular LTE and IEEE 802.11g WiFI applications. Their operational frequency range also makes them compatible with in-building DAS networks which are used to distribute Cellular and WiFi signals throughout a building or area.

Search GPS/Cellular →

400 MHz Antennas - for multipoint, SCADA, UHF Business Band, General Mobile Radio Service
L-com’s HyperLink brand 400 MHz Omni Directional Antennas are ideally suited for multipoint, SCADA, UHF Business Band, General Mobile Radio Service, Family Radio Service 2-way "walkie-talkies" and public safety band applications where high gain and wide coverage are required. Our 400 MHz Antennas are available in 410 MHz to 490 MHz frequency ranges.

Search 400 MHz →

380-6000 MHz DAS Antennas - used to distribute Cellular and WiFi signals throughout a building or area
The HyperLink brand antennas in this section are ideal for Distributed Antenna System (DAS) applications. DAS systems are used to distribute Cellular and WiFi signals throughout a building or area. These wideband antennas eliminate the need to purchase different antennas for each frequency being used. A Distributed Antenna System (DAS) involves the use of several antennas as opposed to one antenna to provide wireless coverage to the same area but with reduced total power and additional reliability. Often times a DAS uses RF directional couplers and/or wireless amplifiers to split and amplify the wireless signal from the source out to the distributed antennas. In many cases a DAS will use a combination of low loss coaxial cabling as well as fiber optic cabling supporting radio over fiber (RoF) technology to distribute the wireless signals to the antennas. A Distributed Antenna System can be designed for use indoors or outdoors and can be used to provide wireless coverage to hotels, subways, airports, hospitals, businesses, roadway tunnels etc. The wireless services typically provided by a DAS include PCS, cellular, Wi-Fi, police, fire, and emergency services.

Search 380-6000 MHz DAS Antennas →

Low PIM DAS Antennas - for LTE/4G bands
The key to providing the best performance in a DAS application is to ensure the components used are low PIM rated. This helps meet the increasing demand for higher data rates and the ability to provide streaming video for mobile devices. The DAS antennas in this section feature a low PIM rating of less than -150 dBc which helps meets the most demanding PIM requirements for LTE/4G bands.

Search Low PIM Rated →

900 MHz Antennas - for SCADA, 900 MHz ISM/GSM, RFID and 900 MHz Cellular
We offer HyperLink brand 900 MHz wireless antennas for all your WLAN applications. These 900 MHz antennas are well suited for the following applications: SCADA, 900 MHz ISM/GSM, RFID and 900 MHz Cellular deployments.

Search 900 MHz →

1.2 GHz Antennas - for Wireless Video links & Security Systems
This high gain flat patch security antenna provides 8 dBi gain with broad coverage. It is suitable for both indoor and outdoor wireless video, wireless cameras and wireless security applications in the 1.2GHz band.

Search 1.2 GHz →

1.9 GHz Antennas for PCS
L-com’s 1.9 GHz HyperLink brand wireless antennas are well suited for all your 1.9 GHz Personal Communication Service (PCS) applications.

Search 1.9 GHz →

2.4 GHz Antennas - for IEEE 802.11 a/b/g/n, WiFi, WiMax, Bluetooth, WLAN’s, WISP, public hot spots
L-com’s 2.4 GHz WiFi antennas include over 200 models ranging from Grid, Yagi, Patch, Panel, Rubber Duck, Omni directional and more. These HyperLink brand 2.4 GHz WiFi antennas are designed for years of operation even under harsh conditions. Popular applications include: IEEE 802.11 a/b/g/n, WiFi, WiMax, Bluetooth, WLAN’s, WISP, public “hot spots” and more

Search 2.4 GHz →

2.4/5.8 GHz Antennas - for new generation 802.11ac wireless access points and routers
The antennas in this section are deisgned to operate on both 2.4 GHz and 5.8 GHz. This dual band design makes them ideal for use with many of the new generation 802.11ac wireless access points and routers. These antenans are available as single feed type or multiple feed for use with MIMO radios. The dual band design also eliminates the need to purchase separate antennas for each frequency which saves costs and installation time.

Search 2.4/5.8 GHz →

2.6 GHz Antennas - for IEEE 802.16 and 802.20, WiMAX, NLOS and WISO
L-com's popular HyperLink brand 2.6 GHz wireless antennas are perfect for all your IEEE 802.16 and 802.20, WiMAX, NLOS and WISO applications. We offer both indoor and outdoor versions of these 2.6 GHz antennas.

Search 2.6 GHz →

3.5 GHz Antennas - for IEEE 802.16e, WiMAX, Mobile WiMAX and SOFDMA
L-com's HyperLink brand 3.5 GHz antennas are available in Omni directional, Dish, Patch, Panel, and Rubber Duck form factors. These 3.5 GHz antennas are well suited for the following applications: IEEE 802.16e, WiMAX, Mobile WiMAX and SOFDMA.

Search 3.5 GHz →

4.9 GHz Antennas - for public safety and homeland security
L-com’s HyperLink brand 4.9 GHz antennas are specifically designed to address public safety and homeland security applications. We offer both indoor and outdoor models to cover all your installation requirements. Additional applications include: Large Scale WLL, Personal Area Network (PAN) and WLAN / On-Scene Incident Command.

Search 4.9 Ghz →

5 GHz Wifi Antennas - for UNII, ISM, IEEE 802.11a and 802.11ac & Radio Local Area Networks (RLAN)
L-com’s HyperLink brand 5 GHz WiFi antennas can be used in UNII, ISM, IEEE 802.11a and 802.11ac, Radio Local Area Networks (RLAN), Fixed Wireless Access Systems (FWA), WiMAX and MESH wireless networks. We offer antennas in frequency ranges from 5.1 GHz to 5.8 GHz as well as multi-band antennas for 2.4/5 GHz applications.

Search 5 Ghz →

MIMO 802.11n / 802.11ac Antennas - for wireless Access Points/CPE with MIMO capabilities
L-com’s MIMO antennas are ideal for use with wireless Access Points/CPE with MIMO capabilities. These antennas are available for 802.11a/b/g/n as well as 802.11ac applications. MIMO Antenna types include Ceiling, Mini Patch, Panel, Dish and Yagi antennas. Multiple–Input Multiple-Output (MIMO) antennas have two or more antennas in a single physical package and are designed for use in IEEE 802.11n wireless networks. By utilizing multiple antennas, data throughput and range are increased compared to a single antenna using the same radio transmit power. Additionally MIMO antennas improve link reliability and experience less fading than a single antenna system. By transmitting multiple data streams at the same time, wireless capacity is increased. MIMO technology uses Multipath (when wireless signals “bounce” off of objects and arrive at the receiver at different times) to improve wireless performance. MIMO technology takes a single data stream and breaks it down into several separate data streams and sends it out over multiple antennas. This provides redundancy.

Search MIMO 802.11n / 802.11ac →

Embedded / Internal PCB Antennas - for embedded applications
HyperLink embedded/internal antennas are designed to directly integrate into devices requiring wireless capability. By embedding these antennas directly into a device, the need for external antennas is eliminated. These highly efficient low profile PCB-based antenna solutions are ideal for embedded applications requiring integration flexibility.

Search Embedded PCB →

WiFi Access Point & WiFi Antenna Kits - for 802.11n wireless installations
L-com’s WiFi access point and MIMO antenna kits are perfect for all in one 802.11n wireless installations. We offer Kits with L-com’s outdoor CPE and various Hyperlink brand MIMO antennas. In addition we offer antenna kits that feature a unique mounting bracket that allows the Ubiquiti® RocketM2 or RocketM5 radio to be attached directly to the antenna.

Search GPS/Cellular →

Radome Cover for Dish Antennas - for outdoor dish antennas
L-com's HyperLink brand Radome covers offer the highest level of protection for all of your outdoor WiFi Dish antenna applications. These sturdy Radome covers feature fiberglass construction and a UV stable gray finish.

Search GPS/Cellular →

Mobile Antenna Mounts - for multipoint mobile applications including service vehicles & public transportation
L-com carries multiple mobile WiFi antenna mounts for all of your mobile wireless applications. These rugged magnetic mobile antenna mounts can be used for multipoint mobile applications including service vehicles, public transportation, law enforcement, mining and construction vehicles, as well as numerous other commercial and industrial applications.

Search GPS/Cellular →

WiFi Antenna Mounts & Brackets
L-com's HyperLink brand of WiFi antenna mounts include mast mounts, wall and ceiling mounts, window mounts, exterior corner mounts, tilt-and-swivel master mounting and more

Search GPS/Cellular →

Antenna Replacement Parts
Replacement Feedhorns & Hardware

Search GPS/Cellular →

FS1 Series AISG / RET Connectors
Remote Electrical Tilt (RET) antenna systems are designed so that wireless providers can make adjustments remotely to their antenna systems. The Antenna Interface Standards Group (AISG) has created specifications for the control interface for these types of systems. This includes AISG connectors and AISG cable assemblies. L-com now offers these FS1 type connectors for AISG applications as well as industrial control applications.

Search GPS/Cellular →

AISG Cable Assemblies & Bulk Cable
Remote Electrical Tilt (RET) antenna systems are designed so that wireless providers can make adjustments remotely to their antenna systems. The Antenna Interface Standards Group (AISG) has created specifications for the control interface for these types of systems. This includes AISG cable assemblies and bulk cable. L-com now offers AISG cable assemblies featuring FS1 type connectors for AISG applications as well as industrial control applications. Also available AISG 6-conductor bulk cable.

Search GPS/Cellular →





Search Antennas →

Need more Information? Contact our Technical Sales Team below, or call us on 01202 872771.