Import duties, taxes and any additional delivery or clearance charges, are not included in the item price or the quoted shipping cost.
These charges are the responsibility of the Buyer.
Please check with your local customs office to determine any additional charges prior to purchase.
Product Datasheet Start with the Box‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡¦
The box is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass reinforced polyester, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The raised lid has a full edge gasket. The enclosure material is UV stabilized and comes in machine tool gray. Mounting Plate‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡¦
The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more (see mounting plate drawing). With the optional HGX-AMOUNT02 bracket a wide array of HyperLink Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the HGX-NMOUNT03 Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features two 200-240 VAC Universal EURO outlets (contained in one duplex socket) and a terminal strip to supply power to internal equipment. Hot and Cold Environments‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡¦
To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Heater and Cooling system, internal temperatures can be better maintained. This model is ideal in Hot and Cold environments.
The NB141207-EHF model includes a 200-240V thermostat-controlled 200W heater. The 200W heater is controlled by its own thermostat. The heater turns on when the internal temperature drops to 40‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° F (4‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° C) ‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡±7‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° and turns off at 60‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° F (15‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° C) ‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡±5‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡°. No extra room for the heater is required since it is mounted underneath the plate.
For cooling, the 240V thermostat-controlled 18W high airflow, low noise fan used allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for cleaning and replacement. The fan turns on when the internal temperature rises to 120‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° F (49‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° C) ‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡±5‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° and turns off at 90‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° F (32‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡° C) ‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡±10‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡°. Lightning Protection‚¬Å¡¬Ãƒ€¦¡¬ÃƒÆ’Ã†€™€š¬¦¡¦
In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Mounted to the optional HGX-AMOUNT02 bracket, the HGLN-CAT5 lightning protector can be used with Power-over-Ethernet applications.
- Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure
- Stainless steel quick release latches with padlock hasps
- NEMA Type 3R, 3RX / IP24 rated
- Fully gasketed raised Vented lid with removable filters integral mounting flange
- Features aluminum mounting plate with Universal duplex socket for 200-240 VAC power Thermostat Controlled Heating Cooling System