Product Datasheet Start with the Box€š¬Ã…¡¬ÃƒÆ’‚¬¦¡¦
The box is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass reinforced polyester, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The raised lid has a full edge gasket. The enclosure material is UV stabilized and comes in machine tool gray. Mounting Plate€š¬Ã…¡¬ÃƒÆ’‚¬¦¡¦
The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more (see mounting plate drawing). With the optional HGX-AMOUNT02
bracket a wide array of HyperLink Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the HGX-NMOUNT03
Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features two 240 VAC Universal EURO outlets (contained in one duplex socket) and a terminal strip to supply power to internal equipment. Cold Environments...
To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in heating system, internal temperatures can be better maintained. This model is ideal in Cold environments.
The NB141207-EH0 includes a 200-240V thermostat-controlled 200W heater. The 200W heater is controlled by its own thermostat. The heater turns on when the internal temperature drops to 40€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° F (4€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° C) €š¬Ã…¡¬ÃƒÆ’‚¬¦¡±7€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° and turns off at 60€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° F (15€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° C) €š¬Ã…¡¬ÃƒÆ’‚¬¦¡±5€š¬Ã…¡¬ÃƒÆ’‚¬¦¡°. No extra room for the heater is required since it is mounted underneath the plate. Lightning Protection€š¬Ã…¡¬ÃƒÆ’‚¬¦¡¦
In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Mounted to the optional HGX-AMOUNT02 bracket, the HGLN-CAT5-2
lightning protector can be used with Power-over-Ethernet applications.
- Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure
- Stainless steel quick release latches with padlock hasps
- NEMA Type 4, 4X / IP66 rated
- Fully gasketed raised lid & integral mounting flange
- Features aluminum mounting plate with Universal duplex socket for 200-240 VAC power & Thermostat Controlled Heating System