Product Datasheet Start with the Box...
The box is a rugged 18 x 16" x 8" weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed from molded fiberglass, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The box can also be pole mounted with the optional pole mounting hardware kit. The fully gasketed lid features a stainless steel continuous hinge and stainless steel quick release latches with padlock hasps. The enclosure material is UV stabilized and comes in machine tool gray. The enclosure also features holes for mounting Lightning Protectors or Connectors, a grounding lug and €š¬Ã…¡¬ÃƒÆ’‚¬¦¡½€š¬Ã…¡¬ÃƒÆ’‚¬¦¡ cable conduit connector.
Due to the large size of this enclosure, it can accommodate dual sets of most access points. Mounting Plate
The aluminum mounting plate has provisions to mount WLAN equipment from Cisco, Symbol, D-Link, HyperLink and more. With the optional HGX-AMOUNT02
bracket a wide array of HyperLink Amplifiers, Power-Over-Ethernet products and Power Supplies can be mounted as well. Two of these brackets can be mounted side by side. Also available is the HGX-NMOUNT03
Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure. The plate features four standard surge protected 240 VAC outlets and a terminal strip to supply power to internal equipment. Hot Environments
To help ensure trouble-free operation of electronic equipment, proper operating temperatures inside an enclosure needs to be maintained. With the built-in Cooling Fans, internal temperatures can be better maintained. This model is ideal in Hot environments.
The NB181608-20F includes two thermostat-controlled 18W (36W total) fans. The high airflow, low noise fans used allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for cleaning and replacement. The fans turns on when the internal temperature rises to 120€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° F (49€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° C) €š¬Ã…¡¬ÃƒÆ’‚¬¦¡±5€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° and turns off at 90€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° F (32€š¬Ã…¡¬ÃƒÆ’‚¬¦¡° C) €š¬Ã…¡¬ÃƒÆ’‚¬¦¡±10€š¬Ã…¡¬ÃƒÆ’‚¬¦¡°. These cooling fans do not require the use of any of the AC outlets, leaving them all available for your equipment. Lightning Protection
Surge protection is provided as a standard feature on the internal AC outlets. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. Mounted to the optional HGX-AMOUNT02 bracket, the HGLN-CAT5 lightning protector can be used with Power-over-Ethernet applications.
- Molded Fiberglass Reinforced Polyester (FRP) industrial Enclosure
- Stainless steel quick release latches with padlock hasps
- NEMA Type 3R, 3RX / IP24 rated
- Fully gasketed raised Vented lid with removable filters & integral mounting flange
- Features aluminum mounting plate with 240 VAC terminal strip & Thermostat Controlled Cooling System