DPK-AIO16-64ME - DAQ-Pack, 64-Channel, USB Multifunction Analog Input/Output System, 16-bit 64-ch 250kHz A/D, 16 DIO, 2 D/A, On board Cal
This product is RoHS-compliant
Please contact us if you require a non-RoHS version.
Please note, Acces I/O products are often available in an array of different options, of which only a selection will be displayed here. Please contact us for pricing if you require a product option that is not shown on our website.
The DAQ-PACK M Series is a highly integrated multifunction data acquisition and control system. The systems offers an ideal solution for adding portable, easy-to-install high-speed analog and digital I/O capabilities to any PC or embedded system with a USB port. These units are USB 2.0 high-speed devices, offering the highest speed available on the USB 2.0 bus. It is available with 12 or 16-bit analog to digital converters with speeds capable of up to 500kHz (divided equally by the total number of channels configured for use) for its 64 single-ended or 32 differential analog inputs. Groups of four channels at a time can be independently software configured to accept 8 different input ranges. A unique, real-time internal calibration system allows the unit to continually compensate for offset/gain errors giving a more accurate reading. Additional features include two 16-bit analog outputs, 16 high-current digital I/O lines, and a programmable 16-bit counter inchall packaged in a small, rugged, gold-zinc plated industrial enclosure. The counter can be configured in a variety of modes and has the ability to use external signals to trigger and control the scanning of its analog inputs. The unit is plug-and-play allowing a quick connection whenever you need additional I/O on the convenience of a USB port.
The small, compact, multifunction I/O DAQ-PACK M Series units provide the user with everything needed to start acquiring, measuring, analyzing, and monitoring in a variety of applications. These data acquisition and control devices can be used in many current real-world applications such as precision measurement, analysis, monitoring, and control in countless embedded applications.
These units are designed to be used in rugged industrial environments but are small enough to fit nicely onto any desk or testing station. The boards inside are PC/104 sized (3.550 x 3.775 inches, 90mm x 96mm) and ship inside a gold-zinc plated industrial enclosure with an anti-skid bottom. The enclosure is silk-screened with diagrammatic connector pin identification and pin assignments to easily reference and make all signal connections. A DIN rail mounting provision and extended temperature is available for installation in industrial environments.
The boards feature eight standard analog voltage input ranges (independently configured) and include a data sample buffer.
Analog to digital conversion starts or inchƒ¦“A/D starts inch are issued one of three ways: Software Start, Timer Start, or External Trigger Start. A/D starts are software configured to be either rising or falling edge. Additionally, A/D starts are software configured to be Single Channel or Scan. Single Channel samples data once from the next consecutive channel within the enabled set. A Scan samples data from all channels within the set at the fastest possible rate.
A fully programmable 8254 16-bit counter is provided with a maximum input frequency of 10MHz. The clock, gate (inputs) and output can be accessed externally for extended functionality. The counter can be configured in a variety of modes and has the ability to use external signals for its inputs.
Calibration
Advanced calibration models feature a unique real-time internal autocalibration system that allows the card to compensate for offset/gain errors, giving a more accurate reading. To minimize noise, the board offers a technique called oversampling. Additionally, each channel contains its own analog ground pin on the I/O connector which is helpful in reducing noise from external signal sources. The channel-by-channel programmable gain feature enables measurement of an assortment of large and small signals in one scan inchall under software control at up to 500kHz. The board's data buffer and ability to trigger the A/D in real time assures synchronized sampling that is unaffected by other computer operations inchan essential requirement for signal, vibration and transient analysis where high data rates must be sustained for short periods of time. More information regarding calibration can be found in the product manual.
Each board shipped from ACCES is factory calibrated as part of the production process using a high-quality 7 digit digital voltmeter (DVM) and an extremely stable voltage reference.