Skip to content
ST-IPFO4K18GB-R-LC

4K 18Gbps HDMI Extender Over IP via One LC Fiber Optic Cable Receiver Only

SKU ST-IPFO4K18GB-R-LC
by NTI
£478.78 - £478.78
£478.78
£478.78 - £478.78
£478.78

  • The XTENDEX 4K 18Gbps HDMI Extender Over IP via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, audio, IR, and RS232 up to 24.8 miles (40 kilometers) away from an HDMI source using a single LC singlemode fiber optic strand or 1,640 feet (500 meters) using LC multimode fiber optic cable.

    Each 4K 18Gbps HDMI Extender Over IP consists of a local unit that connects to an HDMI source and a local display via the HDMI loop output, and a remote unit that connects to an HDMI display. The local and remote units can be connected together for a Point-to-Point connection via Fiber Optic Cable or a Point-to-Many connection via a 10G SFP network switch. Support for multiple transmitters requires a managed 10G SFP network switch.

    • Signal transmission via single-strand LC fiber optic cable ; Using singlemode 9-micron cable, extend to 24.8 miles (40 km) ; Using 50-micron OM2 (or better) multimode cable, extend to 1,640 feet (500 meters) ; Zero latency
    • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
    • Cascade network switches to extend the length longer distances.
    • Up to 12 switches can be cascaded.
    • HDMI features supported: HDMI 2.0 ; 8-bit, 10-bit, and 12-bit Deep Color ; Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 7.1CH, DTS 5.1, and DTS:X ; RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0 ; Bandwidth up to 600 Mhz (18Gbps) ; 3D (1080p @60Hz)
    • Support for CEC (consumer electronic control) compatible devices.
    • HDR10
    • ARC
    • HDCP 2.2 and 1.4 compliant.
    • Supports local and remote HDMI displays.
    • For a point-to-many connection, a standalone network with an unmanaged 10G SFP network switch, hub, or router can be used instead of a managed SFP network switch.
    • Easily expandable. Add remote units as you add monitors.
    • Up to 255 receivers supported.
    • It is not recommended to use any other network devices on this standalone network as it may cause degradation in performance.
    • Support for multiple transmitters (many-to-many connection) requires a managed 10G SFP network switch with IGMP support and Jumbo frame support. Standard LAN switches can only support one transmitter.
    • The managed 10G SFP network switch must support port-based IEEE 802.1Q VLAN.
    • Each VLAN acts as a separate HDMI Over IP Channel on the network.
    • Each VLAN channel supports one transmitter.
    • The number of local and remote units that can be used is dependent on the backplane bandwidth of the switch.
    • Plug and play installation allows receivers to find the transmitters automatically on the same subnet.
    • Local and remote units must be in the same LAN. The units do not support WAN connections.
    • Built-in default EDID table.
    • Supports full-duplex RS232 up to 115200 baud.
    • Bi-directional IR control from input and output locations.
    • Supports HDMI embedded digital audio and ARC audio extraction via Toslink connection.
    • Built-in surge and ESD protection.
    • Mounting brackets included for easy surface/wall mounting.
  • Product Datasheet

  • Local Unit

    • One female HDMI connector for source connection.
    • One female HDMI connector for local display.
    • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
    • Supports embedded digital audio.
    • Two 3.5mm ports connecting an IR emitter and receiver (included).
    • IR frequency range: 20 to 60 kHz.
    • 3-pin screw terminal for RS232.
    • Supports full-duplex RS232 up to 115200 baud.
    • One TOSLINK optical port for HDMI ARC audio extraction
    • One simplex LC fiber optic port for sending/receiving video/audio, IR, and RS232 signals.
    • One female USB Micro Type B connector for firmware updates.
    • Supports HDCP 2.2 and 1.4.
    • Remote Unit
    • One female HDMI connector for display.
    • Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @60Hz YUV 4:4:4, HDTV resolutions to 1080p @60Hz, and up to 1920x1200 (WUXGA).
    • Supports embedded digital audio.
    • Two 3.5mm ports connecting an IR emitter and receiver (included).
    • IR frequency range: 20 to 60 kHz.
    • 3-pin screw terminal for RS232.
    • Supports full-duplex RS232 up to 115200 baud.
    • One TOSLINK optical port for SPDIF digital audio.
    • One simplex LC fiber optic port for sending/receiving video/audio, IR, and RS232 signals.
    • One female USB Micro Type B connector for firmware updates
    • Supports HDCP 2.2 and 1.4.

    Power

    • Local and remote unit: Input: 100 to 240 VAC at 50 or 60Hz via AC adapter. (Country-specific power supplies included.)
    • Output: US power supply: 5VDC, 2A ; UK, EU, AUS power supplies: 5VDC, 3A
    • Power consumption: Local unit: 4.6W ; Remote unit: 4.1W
    • Dimensions WxDxH (in): 4.88x4.54x1.18 (124x115x30 mm)