-
The XTENDEX® 4K HDMI USB KVM Over IP Extender provides remote KVM (USB keyboard, USB mouse, and 4Kx2K HDMI monitor) access to a USB computer up to 394 feet (120 meters) over a Gigabit network using a single CAT5e/6/6a/7 cable. The extender consists of the ST-IPC6FOUSB4K-L-POE local unit that connects to a computer and the ST-IPC6FOUSB4K-R-POE remote unit that connects to an HDMI monitor, USB keyboard, and USB mouse.
The local and remote units can be connected together for a Point-to-Point connection via CATx cable, or a Point-to-Many or Many-to-Many connection via a Gigabit network switch.
-
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 @30Hz, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
-
Cascade network switches to extend the length long distances.
-
HDMI features supported:
HDMI 1.4 ;
RGB, YCbCr 4:4:4, YCbCr 4:2:2, and YCbCr 4:2:0 ;
LPCM 5.1/7.1, Dolby Digital, and DTS ;
Bandwidth up to 340 MHz (10.2 Gbps) ;
HDCP 1.4 compliant.
-
Two USB 2.0 ports for keyboard, mouse, flash drive, or touchscreen display.
-
Keyboard and mouse are hot-pluggable.
-
Power over Ethernet (PoE) “ power supply not required at the local or remote unit when used with a switch that supports PoE.
-
Supports video wall installations from 1x2 to 8x16 screens.
-
Displays can be rotated 90, 180 and 270°.
-
Plug-and-Play installation allows receivers to find the transmitter automatically on the same network. (Network configuration may be required if using a managed network switch.)
-
Bi-directional IR control from input and output locations.
-
Manage transmitter/receiver connections and video wall configuration with built-in software or DIP switches.
-
Supports full-duplex RS232 up to 115200 baud.
-
Customizable EDID table.
-
Easily expandable “ add receivers as you add control stations.
-
Mounting brackets included for easy surface/wall mounting.
- Product Datasheet
-
-
Remote Unit
-
One female HDMI connector.
-
Supports Ultra-HD 4Kx2K resolutions to 3840x2160 @30Hz, HDTV resolutions to 1080p, and up to 1920x1200 (WUXGA).
-
Supports embedded digital audio through HDMI compatible TVs or audio receivers.
-
Two female USB 2.0 Type A connectors for keyboard, mouse, flash drive, or touchscreen display.
-
Keyboard and mouse are hot-pluggable.
-
Two female 3.5mm ports for connecting an IR emitter and receiver (included).
-
IR frequency: 38kHz to 56kHz
-
3-pin screw terminal for RS232.
-
Supports full-duplex RS232 up to 115200 baud.
-
One female RJ45 port for sending/receiving high definition video/audio, USB, RS232, and IR signals.
-
One SFP receptacle “ fiber extension not supported at this time.
-
DIP switch for specifying unit ID.